Welcome Customer !

Membership

XwbooPaper machineryPapermaking Auxiliary EquipmentDryerFlue gas desulfurization gypsum dryer
  • $item.Title
  • $item.Title

Flue gas desulfurization gypsum dryer

Shanghai Tongli Heavy Machinery Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Dryer
Place of Origin
,
[Product Specifications]: 1.28.0m-3.628m[single machine maximum output]: 25[Motor power]: 22[Scope of application]: Gypsum calcination production line, drying block and powder materials in mining, construction, chemical, metallurgical and other industries[Applicable materials]: Desulfurized gypsum, magnetic powder, river sand, clay, coke, graphite, slag, sawdust, fly ash, etc.

Product introduction

Desulfurization gypsum drying machine mainly consists of a heat source scattering device belt feeding machine feeding machine rotary drum belt type feeder induced draft fan unloader and distribution cabinets. With the increase of environmental protection consciousness the control of sulfur dioxide emissions from coal fired flue gas in power plant is becoming more and more tight so the power plant desulfurization is imperative. At present the processing technology and equipment of FGD gypsum are not completely the same as natural gypsum such as in the process of material transportation dust treatment calcination and so on. In terms of physical properties desulfurization gypsum and natural gypsum are also different. It is also worth noting that the sources of desulfurization gypsum and natural gypsum are different.

Structure principle

Desulfurization gypsum has the characteristic of high moisture and high adhesion In the drying process wet desulfurization gypsum enters FGD gypsum equipment through Belt conveyor after the Block FGD gypsum enters dryer it can be divided into four parts as follows.

The first is moving material zone much Water content would be evaporated when the wet desulfurization gypsum enters this zone and touches the hot wind. Under the moving of large lead angle’ board desulfurization gypsum is passed to the next zone.

The second is cleaning zone when the materials fall down the cleaning device will clean the desulfurization gypsum quickly.

The third is inclined lifting plate zone which is a low temperature and drying area in this zone the desulfurization gypsum takes on Low moisture and loose state. After heat exchange the moisture content has met the requirements and it will be the last zone.

The fourth is material outing zone Material in this area scrolls to the discharge port and the whole drying process has finished here.

Technical advantage

1、 Strong anti overload ability Large amount of treatment Less fuel consumption Low drying cost.

2、 The concurrent flow drying method. Hot air and wet material get into the dryer from the same side which could use the high evaporation intensity meanwhile the thermal efficiency is pretty high.

3、The operating parameters can be changed according to different material properties so that the whole broken fabric curtain can be formed in the drying machine barrel and the heat exchange is more fully;

4、The new feed and discharge device which eliminate the phenomenon of clogging discontinuous uneven return and so on when rattler-drying machinery gives materials.

5、New internal structure enhancing cleaning and heat conduction. And the sticking phenomenon of the inner wall of the cylinder is eliminated. The adaptability to material moisture and viscosity is more high.

Latest case

Flue gas desulfurization gypsum dryer of Tongli heavy mechanism is put into operation smoothly in Wuhan * * Mining Co. Ltd. and the operation of the equipment is stable and up to the standards of production the technical indicators have reached the European standard.

Technical parameter

specifications     (m)processing capacity
(t/h)
Feed moisture(%)Discharge moisture (%)artificialHost power(KW)Calorific value of coal(kcal/kg)Inlet temperature(℃)
 Φ1.5x144-660±5≤8315≥6000800±30
 Φ1.8x186-1060±5≤8318.5≥6000800±30
 Φ2.0x208-1260±5≤8418.5≥6000800±30
 Φ2.2x2010-1560±5≤8422≥6000800±30
 Φ2.4x2015-2060±5≤8422≥6000800±30
The company's production base covers an area of ??153,800 square meters, of which the workshop construction area is 85,000 square meters and the maximum lifting capacity of a single vehicle is 200 tons. The company has φ5.3 × 18m (bearing 200t) CNC horizontal lathe, φ5.5 × 18m barrel lathe, φ8m heavy digital vertical lathe, φ8.0m heavy duty hobbing machine, 14 × 5m CNC floor boring and milling machine 3.4 × 10m CNC Longmen boring and milling machines, 120mm CNC rolling machines, φ6.5×20m large annealing furnaces, φ6.5×20m sand blasting rooms, 1800t four-column hydraulic presses, 10t electric arc furnaces and other heavy machinery manufacturing equipment more than 100 sets (sets), is a comprehensive machinery One of the most processing companies.After more than 50 years of continuous development, the company already has a group of experienced technical experts and high-quality management personnel, a first-class science and technology research and development center and engineering service team. At the same time, the company has its own intellectual property rights in the slag vertical mill, raw vertical mill, cement vertical mill, coal vertical mill and rotary kiln, cement mill, wind sweep coal mill, dryer and other cement machinery series host equipment; The company also produces equipment and large structural parts such as compound fertilizers, mining, power generation, and sludge (waste) incineration systems. The products are exported to Germany, Russia, Brazil, Egypt, Iran, Bangladesh, Pakistan, Turkey, Myanmar, Vietnam, Colombia, Bolivia. , South Africa and more than 60 countries and regions, nearly 1,000 users worldwide.
Similar Product Recommend