Membership
Help
Shenzhen Jiwei Automations Ltd.
Shenzhen Jiwei Automations Ltd.
Fork-11Tuning Fork Level Switch is specially designed for powdery and fine-grainedbulk solids, such as sands, fine raw materials in chemical industry, flours,salts etc. The lowest measurable medium density can be as low as 0.008g/cm³. Itmakes Fork-11 the best level switch for ultra-low density mediums. Fork-11 hasvery high reliability. It has been applied extensively.
Fork-11 Tuning Fork Level Switchprobe is based on a tuning fork harmonic resonance. It utilizes piezoelectricdevices to drive the fork to vibrate and detect the changes of vibration. Thefork vibrates in resonant frequency when it does not contact with medium. Oncethe fork comes in contact with medium, vibrating amplitude of the fork will decrease substantially. Output fromthe detecting piezoelectric device will decrease accordingly. An integratedcircuit is designed to analyze the amount of decrease and output a switchsignal. By reasonably increasing the area of tines and precisely adjustingharmonic resonance, Jiwei Fork-11 Tuning Fork Level Switch offers a very highsensitivity. Therefore, the lowest measurable density can be as low as0.008g/cm³.
● Reasonable design oftines and precisely adjusted of fork resonant frequency. The lowest measurabledensity can be as low as 0.008g/cm³.
● Particularly suits forlevel measurement of powdery, fine-grained bulk solids, can effectively avoidmaterial buildup.
● Industry-leadingperformance for high temperature working environment, can tolerate processtemperature up to 400℃.
● Strong self-diagnosticfunction helps to accurately locate the fault.
● Easy installation andmaintenance free.
● With CE certificates, gasand dust Flameproof Enclosure and Intrinsic Safety certificates.
● Made of strong corrosionresistant material 316L.
Applicable medium | Types of the Medium | powders or granular solids |
Density | >0.008g/cm³ | |
Medium size | Max. 10mm | |
Fork data | Vibrating frequency | ~140Hz |
Fork length | 150mm | |
Switching Delay | When immersed | 0.5s |
When laid bare | 1s | |
Power supply | Relay output | 20~253VAC/20~72VDC |
Two-wire | 10~36V DC | |
Maximum power consumption | 8VA (AC);1.5W (DC) | |
Output | Relay output | DPDT, 5A/253V AC/24V DC |
Two-wire | 8/16mA, Alarm<2.3mA | |
Working environment | Process pressure | -1~25bar |
Process temperature | Regular: -50~150℃ High temperature: -50~250℃ Ultra high temperature:-50~400℃ | |
Ambient temperature | -40~80℃ | |
Storage and transport temperature | -40~80℃ | |
Overvoltage protections | Relay output | Category III, class I |
Two-wire | Category III, class II | |
Approvals | Protection rating | IP66/IP67 |
Explosion-proof types | Flameproof Enclosure: Ex d IIC T6~T1 Gb, Intrinsic Safety: Ex ia IIC T6~T1 Ga | |
CE | LVD and EMC certificates | |
Materials | External Housing | Aluminum Alloy |
Ground terminal | 316L | |
Process fitting | 316L | |
Fork body | 316L | |
Process seal | Klingersil C-4400 |
● Low density foam beads in the silo of a foam molding machine and aplastic forming machine.
● Zircon sand and petroleumcoke.
● Other (ultra-low density)particles and powders.
● After spraying PTFE on fork body, it is especially suitable for fumed silica(SiO₂) level measurement. The density of fumed silica is as low as 0.01g/cm³,and the lowest detectable value of Fork-11 is 0.008g/cm³, which fully meets themeasurement requirements of fumed silica working condition.