Welcome Customer !

Membership

XwbooSecurity & ProtectionSecurity Inspection EquipmentSecurity CheckerForklift Proximity Warning System
  • $item.Title
  • $item.Title

Forklift Proximity Warning System

Shinningpc Technology Co.,ltd

Model
Nature of the Manufacturer
Other
Product Category
Security Checker
Place of Origin
,
Forklift Proximity Warning System

DAX202 uses the latest technology to significantly reduce the risk of collision between moving vehicles and pedestrians in the workplace. The system sets up an invisible exclusion zone around the vehicle, providing an audible (siren followed by “Look Out! Person near you”) and visual warning alert to the operator when someone is detected within the programmable zone and vibration alert for pedestrian. This creates an opportunity for the driver and pedestrian to take appropriate action to avoid an incident. The detection precision is under 0.1m and the trigger distance can be set from 0.5m-32m.

Rated Voltage 12V – 48VDC
Dimension /Weight 120 x 120 x 61(mm) / 270g
Working Temperature 0 ° to 60°Centigrade
Frequency &Range UWB(Ultra-Wide Band)
3.5G-6.5Ghz; No License Fees Required
Range: 10-70feet
Tags Limit Maxima Tags Detecting:30
Antenna Built-in
Shell Enclosure ABS, Water proof, with metal base
Mounting Horizontally mounted to the outside top of the forklift using cable tie provided.

The Host in SPC® Proximity Warning System detects the distance with Tags in real time. When distance between Host and tags is less than the Alarm Distance (which is preset by users), the Host will drive the Alarm to alert workers keep away. The typical application is listed below.

1. Host install

1). The host has been screwed on metal base in factory. The host should be horizontally tied on the outside top of forklift frame using sheet iron and screws provided in case. The host should not be blocked by any metal objects, or it will affect the detected distance.
2). Connect the host to 12V-48V DC power supply of Forklift with “Power Input Cable” provided.
3). Connect to Alarm with cable provided.

2. Tag install

1) Installation on safety helmet.
Stick the P-Tag on the helmet by using Velcro Tag, USB interface faces down. You may stick the P-Tag on either front, back, left, or right-hand side of the helmet. We suggest putting it on the left-hand side which may increase visibility for the host in most cases.

2) Installation on Vest.

Step 1: Put P-Tag on the surface of Vest, seepicture1.
Step 2: Put P-Tag Base Plate beneath Vest; align it with the P-Tag, see Picture2.
Step 3: Tighten two screws through the Vest and nuts, see picture3.


3) Battery charge.

Fully charge the battery before using it (takes around six hours).
The Tag LED will be off when it is fully charged. Re-charge the battery every TWO weeks if the tag usage is eight hours perday. The P-Tag LED will flash when the battery is low, indicating for re-charge.


  • 1

Shinningpc Industrial Co.,ltd is a professional automotive safety systems supplier. we have our own factory and cooperated factories for producing different auto equips products. as a traditional security products manufacturer, we have a clear target that to provide the most competitive products not only in quality but also at price to clients with those mature auto equips. we would like to supply those equips to our clients exactly meet their requirements and surely we adjust our products design according to end user useful advise. And our innovation will make our enterprises as a leading company in the auto security field. Our products mainly include vehicle safety system, reversing camera system, backup systems, car security monitor, auto stand-alone monitor,overhead mouting dvd player,headrest DVD monitor, CMOS/CCD night vision waterproof surveillance cameras, vehicle Side Camera, vehicle Dvr, DVRs and other auto equips... these products are widely used on cars, vehicles, buses, trucks, trailers , board etc to assure safety while driving/operating. We concentrate on providing you with reliable equips, every product were strictly tested and inspected. For example, vibration test, waterproof test, vandal-proof test, and aging test are processed to evaluate the product performance. All of our security products come with a 12 month warranty. Also with MOQ and lead-time, we can response quickly and make it finished within 10 working days.In 2017,we developed law enforcement Audio and video recorder, 4G law enforcement recorder, 4G wireless picture transmission equipment, data collection stations, Recording flashlight, intelligent baton, etc .And it has a variety of law enforcement system solutions, such as wireless mapping application system, intelligent command and dispatch system, vehicles to stop radar systems, etc .; We are sincerely looking for long-term and mutual benefit relationship with stable partners, please don't hesitate to contact with us for further detail.Company outline:Production Lines:R&D Team and Testting equipment:Workers' Eatery&Dormitory
Similar Product Recommend