Welcome Customer !

Membership

XwbooElectronic ComponentsPiezoelectric Crystal, Frequency ElementTransducerFPD-1&FPD-2 DC ISOLATING TRANSDUCER
  • $item.Title
  • $item.Title

FPD-1&FPD-2 DC ISOLATING TRANSDUCER

Haiyan Jinhan Electronics Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Transducer
Place of Origin
,
The FPD Series DC Isolation Transmitter is an instrument that converts a DC voltage or current signal into a linearly proportionally different DC voltage or current signal that is electrically isolated from each other. Mainly used for measurement of generator rotor voltage and current

1.Introduction:

The FPD Series DC Isolation Transmitter is an instrument that converts a DC voltage or current signal into a linearly proportionally different DC voltage or current signal that is electrically isolated from each other. It can be used to measure the generator rotor voltage and current, and can be widely used in various other occasions.

The main models are as follows:

FPD-1:Single output DC isolation transducer

FPD-2:Dual output DC isolation transducer

FPDH-1:Single output DC high voltage isolation transducer

FPDH-2: Dual output DC high voltage isolation transduce

2.Specification

Accuracy ( 23±3℃) :

0.2% of effecive range

Linearty & repeatability

0.05% typical

Maximum output load

DC current mode : maximum 10V drop

DC voltage mode : maximum 5mA drive

Dielectric strength

2000Vac…power / input & output terminals…… FPD

2000Vac…input / output / case…………………FPD

4000Vac ... power / input & output terminals………FPDH

4000Vac ... input / output / case…………………… FPDH

Output drive capability

≤10mA for voltage mode, ≤10V for current mode

Maximum input over

≤300Vrms continuous> 2V ranges

≤150Vrms continuous≤2V ranges

≤150mA continuous for current input

Input resistance-ohm

≤100M ... ≤2V ranges,≤500K>2V ranges

≤20 for all current input range

Response time & ripple

250 ms typically, ripple 0.1% rms ro

Power effect

< 0.003% for per volt chang

Common mode rejection

120dB, DC to 60Hz

Temperatured stability

≤0.007% ro per degree℃

Storage condition

Temperature range -10 to 70°C, RH 20 to 95% non condensed

Operating condition

Temperature range -5 to 55°C, RH 20 to 95% non condensed

Power supply

±10% of rated, less 3.5 VA for AC input

±10% of rated, less 3.5 Watt for DC input

Construction

Socket plug-in type with barrier terminals


3.Dimensional Drawings:


4.Terminal Connection:


1.Order form:


Input & Output parameters

An:电流输入范围

Input Ranges Current

Vn:电压输入范围

Input Ranges Voltage

Pn:电源 rating

Aux. Power Standard range

A1

0-1mA

A2

0-2mA

V1

0-50mV

V2

0-100mV

V3

0-200mV

P1

AC110 V

120 V ± 15%

PD1

DC110V

120 V ± 15%

A3

0-5mA

A4

0-10mA

V4

0-500mV

V5

0-1V

V6

0-2V

P2

AC220 V

240 V ± 15%

PD2

DC220V

240V± 15%

A5

0-20mA

A6

4-20mA

V7

0-5V

V8

1-5V

V9

0-10V

Ps

Internal Power

PD3

DC24 V

24 V ± 20%

A7

0-50mA

A8

10-50mA

V10

2-10V

V11

0-120V

V12

0-200V

Py

Specified

PDy

Specified

A9

0-75mV

V13

0-350V

V14

0-600V

On:输出

Output Range

O1

0-1mA

O2

0-20mA

O3

4-20mA

O4

0-5mA

O5

0-10mA

O7

0-1V

O8

0-5V

O9

0-10V

O10

2-10V

O11

1-5V

O13

用户


When signing the order contract, the required model and specifications should be specified in detail. The selected model and specifications should be filled in with the code in the following format.

Example 1: FPD-1-A1-P2-O8

FPD-1 Single Output DC Isolation Transmitter

Input: 0-1mA

Auxiliary power supply: AC 220V

Output: 0-5V

Haiyan Jinhan Electronics Technology Co., Ltd was founded on November 18, 2004 which located in Haiyan Science and Technology Park, NO 211, Yanbei Road, Zhejiang China.Our goal is to design and manufacture multiple series of products for power systems. With the ISO9001 / ISO9002 approvals, we have always sustained the principle of producing the best quality, best service and best technical skills.For over 10 years, JINHANCN has contributed and always strived to develop the most durable and stable products for the usage of power systems. We have earned excellent customer feedback and marketing reputation from all over the world.Our products have been applied to both measuring instruments and power distribution systems for utilities and related industries. And we also have developed various series of products to meet the demands of various marketing such as FP/GP/EP/S3/N3 Series High-reliability Power Transmitter, Transmission Screen, Malfunctional Electric Energy Meter, Temperature Controller etc.We truly believe that to give our customers the best service is our main purpose and long-term responsibility.With spirited teamwork, our business has expanded to global markets successfully. All JINHANCN products are originally designed and manufactured (ODM).We have been researching and developing new high-tech products continually in order to meet increasing demand for electricity. To improve business administration and quality assurance, we run CWQC (company wide quality control) with strict step by step quality compliance to our production procedure in compliance with ISO9001.
Similar Product Recommend