Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineFra Transformer Winding Deformation Tester
  • $item.Title
  • $item.Title

Fra Transformer Winding Deformation Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
Measuring speed: 1 minute to 2 minutes for single-phase windingOutput voltage: Vpp-25V, automatically adjusted during testingOutput impedance: 50ΩInput impedance: 1MΩ (built-in 50Ω matching resistance in response channel)Sweep frequency range: 10Hz-2MHzFrequency accuracy: 0.001%Frequency sweep mode: linear or logarithmic, sweep frequency and number of points can be set arbitrarilyCurve display: amplitude-frequency curveWide measuring dynamic range: -120dB~20dB
I. System Introduction


HM5010 Fra Transformer Winding Deformation Tester is used to test power transformers with voltage levels of 6kV and above and other special-purpose transformers. Power transformers are inevitably subject to various fault short-circuit currents or physical shocks during operation or transportation. Under the action of the generated strong electromotive force, the transformer windings may lose stability, causing permanent deformation such as partial distortion, bulging or displacement, which will seriously affect the safe operation of the transformer.

According to the international standard IEC60076-18, the frequency response analysis method is used to measure the winding deformation of the transformer. It is by detecting the amplitude-frequency response characteristics of each winding of the transformer, and comparing the detection results longitudinally or laterally, and judging the transformer according to the degree of change of the amplitude-frequency response characteristics The possible deformation of the winding.

II. Main technical indicators


Measuring speed: 1 minute to 2 minutes for single-phase winding

Output voltage: Vpp-25V, automatically adjusted during testing

Output impedance: 50Ω

Input impedance: 1MΩ (built-in 50Ω matching resistance in response channel)

Sweep frequency range: 10Hz-2MHz

Frequency accuracy: 0.001%

Frequency sweep mode: linear or logarithmic, sweep frequency and number of points can be set arbitrarily

Curve display: amplitude-frequency curve

Wide measuring dynamic range: -120dB~20dB

Power supply voltage: AC220V±10%


details-1-


III. Main technical features


1. Fra Transformer Winding Deformation Tester uses the sweep frequency method to measure the winding characteristics of the transformer. Without hanging the transformer cover, disassembling and disassembling the transformer, by detecting the amplitude-frequency response characteristics of each winding, it can accurately measure the winding distortion for transformers of 6kV and above. , Bulge, or displacement.

2. The measurement speed is fast, and the measurement time for a single winding is within 2 minutes, and three-phase automatic testing can be realized.

3. The frequency accuracy is very high, the frequency accuracy is 0.001%.

4. Using digital frequency synthesis, the frequency stability is higher.

5. Adopt 5000V voltage isolation to fully protect the safety of the test computer.

6. 9 curves can be loaded at the same time, the relevant parameters of each curve are automatically calculated, the deformation of the winding is automatically diagnosed, and the reference conclusion of the diagnosis is given.

7. The analysis software used by Fra Transformer Winding Deformation Tester is powerful, and the software and hardware indicators meet the international electrotechnical standard IEC60076-18.

8. Using Windows platform, compatible with Windows 2000/Windows XP/Windows7/Windows8/Windows10.

9. Adopt the database to save the test data, and the management of the test data is simple and convenient.

10. The software management function is powerful, fully considering the needs of on-site use. The measurement data is automatically saved and exported to generate a Word version test report (corresponding Office software needs to be installed) or a JPG picture report, which is convenient for users to produce test reports.

11. The software has a high degree of intelligence. After the input and output signals are connected, all measurement tasks can be completed by pressing a key.

12. The software interface is simple and intuitive. The analysis, storage, report export, printing and other menus can automatically pop up the menu required for the next step only after completing the current step, which is more convenient.


IV.Fra Transformer Winding Deformation Tester system concise operation process


1. The collector is grounded

2. Wiring the collector and transformer winding

3. Wiring the collector and the computer

4. Turn on the computer

5. Power on the collector

6. Log in to the software

7. Enter information

8. Select the stop frequency and adjust the test parameters

9. Select the winding

10. Start testing

11. Replace the test winding

12. Select the winding

13. Start the test

14. Repeat the above process until all winding tests are completed

15. Data analysis

16. Report export

17. Close the software

18. Power off the collector

19. Disconnect the connection between the collector and the computer

20. Disconnect the transformer wiring

21. The test is complete.

IV.Fra Transformer Winding Deformation Tester system concise operation process

1. The collector is grounded

2. Wiring the collector and transformer winding

3. Wiring the collector and the computer

4. Turn on the computer

5. Power on the collector

6. Log in to the software

7. Enter information

8. Select the stop frequency and adjust the test parameters

9. Select the winding

10. Start testing

11. Replace the test winding

12. Select the winding

13. Start the test

14. Repeat the above process until all winding tests are completed

15. Data analysis

16. Report export

17. Close the software

18. Power off the collector

19. Disconnect the connection between the collector and the computer

20. Disconnect the transformer wiring

21. The test is complete.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend