Membership
Help
Dongguan Woodfung Machinery Co., Ltd
Dongguan Woodfung Machinery Co., Ltd
Edge Bander Woodfung WF360D corner rounding automatic edge banding woodworking machinery
WF360D automatic edge banding machine corner rounding Woodworking Machinery
This machine is specially designed and exclusive for foreign market by us,which is multifunction but favourable price.It is used
for MDF,wooden board and shaving board.It can complete the processes of feeding workpiece,feeding coiled material,edging,end
cutting,fine trimming,scraping and buffing.It can achieve the level as same as foreign machines and the price is favourable.It is
especially suitable for the factory producing board .
Main Material brand:DELTA Touch Screen/CHINT Electronic/DELTA PLC/solenoid valve AirTac/CSK guide/EASUN Cylinder
WF360D functions:Gluing → End Cutting → Rough Trimming→Fine Trimming →Corner Rounding→ Scraping → Buffing
WF360D woodworking edge banding machine full automatic CORNER ROUNDING edge bander Specifications:
| Model | WF360D |
| Motor power | 13.6KW |
| Panel width | ≥60mm |
| Panel thickness | 10~60mm |
| Edge bａnd thickness | 0.4~3.0mm |
| Edge bａnd width | 12~60mm |
| Feed speed | 0~13m/min |
| Working pressure | 0.7Mpa |
| size(LxWxH)cm | 5800×1000×1600mm |
| Weight | 2500KG |
Automatic edge bander for different board and different edge bander
PAINTFREE,LAMINATE,PRATICAL,MDF,SOLID PANELS
SOFT VANEER,PVC,ACRYLIC,PMMA,ABS EDGE BANDERS
Automatic Edge bander application:
DELTA Touch Screen Operation Panel
Taiwan Delta PLC microcomputer control system adopts touch screen intelligent control, which is convenient, quick and easy to use
Gluing part
The glue pot is heated and glued, and the glue is coated with an imported technology structure to make the sheet and the edge banding evenly glued.
The edge bａnd and the sheet are pressed tightly through the pressing wheel, and the adhesion is firm.
End Trimming
The front and rear aligning head is composed of the front aligning head and the rear aligning head. It moves through a linear CSK guide rail.
It adopts the structure of automatic tracking and high-frequency high-speed motor to make the cutting smooth
Rough Trimming
Rough trimming knife is used to leave a margin of 40-50 wire for fine trimming, and automatic die tracking and high-frequency high-speed motor are
used for rapid cutting.
Fine Trimming
Thefinishing knife is R2, leaving 5~6 wire allowance for scraping and trimming the arc with R2 trimming knife
Corner Rounding
The profiling tracking and rounding device can make the end surface of the plate smoother and look atmospheric
Scrapping
It is used to eliminate the secondary wave marks caused by the cutting process of trimming non-linear motion, and make the upper
ａnd lower parts of the board more smooth and tidy. At the same time, the scraping can also adjust the size of the arc to make the edge banding effect better.
Polishing
Use a plate polishing wheel to clean the processed plate, remove excess glue, and make the edge-sealing end surface smoother
