Welcome Customer !

Membership

XwbooGeneral Machinery Valve Safety ValveFully Open Safety Valve with Handle Spring
  • $item.Title
  • $item.Title

Fully Open Safety Valve with Handle Spring

iangsu Zhongwei Measurement and Control Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Safety Valve
Place of Origin
,
Fully Open Safety Valve with Handle Spring
Description:

Productoverview:
A28H/Y With a safety valve spring handle Suitable for the work temperature are less than 200 of the air, steam, water, nitrogen and hydrogen mixed gas medium of the equipment or pipeline, A28Y-P/10R8 is suitable for the work temperature are less than 200 corrosion of the equipment or pipeline, as the overpressure protection device.
Two, With a safety valve spring handle Opening pressure adjustment:
1, safety valve factory, setting value by Taiwan to adjust the opening pressure to the user requirements. If the user make the spring working pressure level, according to the general level of pressure according to the lower limit value of the adjustment of the factory.
2, users will be protected safety valve installed on the device before or during installation, must be re adjusted at the installation site to ensure safety valve set pressure value to meet the requirements.
3, in the plate spring working pressure level within China valve by rotating the adjustment screw to change the amount of spring compression, you can adjust the pressure on the opening.
4, in the rotation adjustment screw until the valve inlet pressure should be reduced to 90% below the opening pressure, to prevent the rotation adjustment screw when the valve is driven to rotate, so that the sealing surface damage.
5, in order to ensure the accurate value of opening pressure, should make adjustments in the medium conditions, such as medium type, temperature as close as possible the actual operating conditions. Media types to change, especially when the state media did not accumulate at the same time (e.g. from liquid to vapor), open the pressure changes often. When the temperature increases, the opening pressure is generally decreased. It is adjusted at room temperature for high temperature, room temperature setting of the pressure value should be slightly higher than the required opening pressure value. To what extent the high structural and material selection and the valve has a relationship should be based on the manufacturer's instructions.
6, the conventional safety valve for a fixed additional back pressure of the occasion, when adjusting the opening pressure after examination (the pressure as the atmospheric pressure), the setting value should be value minus the value of additional back pressure pressure is required to open.
Three, With a safety valve spring handle Common faults and eliminate method:
1, after discharge valve back seat. This is mainly spring bending stem, valve installation position is not correct or stuck by. Should be re assembled.
2, leakage. Under normal working pressure in the equipment, valves and valve seat sealing surface between the leakage exceeds the allowable level. The reasons are: the dirt between the valve and valve seat sealing surface. Wrench can be used to enhance the valve to open several times, the dirt washed out; sealing surface damage. According to the extent of the damage, by grinding or polishing methods after turning to repair; stem bending, tilting or deflection lever and fulcrum, the spool and the valve flap dislocation. Should be re assembled or replaced; three valve spring elasticity or lose. Should be taken to replace the spring, re adjust the opening pressure and other measures.
Don't open the 3, to the required pressure. The reason for this situation is the constant pressure are not allowed. The amount of compression or the position of the hammer should re adjust the spring; the valve stuck valve and valve seat. It should be regular or manual air discharge test of safety valve; lever type safety valve lever is stuck or the hammer is moved. Should re adjust the position of the heavy hammer and the lever moves freely.
4, exhaust pressure continues to rise. This is mainly because the safety valve displacement with Xiaoping equipment safety discharge, should be re select the appropriate safety valve; the valve stem rust midline or spring, so that the valve can not open to a certain height, the stem should be re assembled or replace the spring; exhaust pipe section has not, should be taken to meet the safety area of the exhaust emissions tube.
5, valve frequency hopping or vibration. Is mainly due to stiffness of the spring too. Should use the appropriate spring stiffness; adjustment ring to adjust properly, the back seat pressure too high. Should re adjust the position of adjusting ring; discharge pipe resistance is too large, resulting in excessive emissions of back pressure. We should reduce the discharge pipe resistance.
6, less than the required opening pressure. Mainly constant pressure allowed; spring stretch down aging. Tighten the screws should be properly adjusted or replace the spring.
Four, A28H A28Y With a safety valve spring handle The main components of materials:

NO.Part nameA28H materialA28Y-P materialA28Y-R8 material
Onevalve bodyHT200ZG1Cr18Ni9TiCF8M
Twovalve seatThirty-fiveZG1Cr18Ni9TiCF8M
ThreeThe adjusting ring2Cr131Cr18Ni9TiThree hundred and sixteen
FourValve2Cr131Cr18Ni9TiThree hundred and sixteen
FiveSpring50CrVA50CrVA fluorine plastic coating50CrVA fluorine plastic coating
SixThe stem2Cr132Cr13Three hundred and sixteen
SevenAdjustment screwForty-five2Cr13Three hundred and sixteen
EightProtective coverZG200-400ZG200-400CF8M

Sealing surface materialSurfacing D507Co based alloy hardfacing

Five, A28H A28Y With a safety valve spring handle Dimensions and connection dimensions:

Nominal diametersize
DoRcGLL1H
FifteenTen1/2"3/4"Thirty-sevenSixty-twoOne hundred and eighty-nine
TwentyTwelve3/4"1"FortySixty-fiveOne hundred and ninety-six
Twenty-fiveFifteen1"11/4"Forty-fiveSeventy-twoTwo hundred and seventy-seven
Thirty-twoTwenty11/4"11/2"Fifty-fiveEighty-fiveThree hundred and twelve
FortyTwenty-five11/2"2"Sixty-sevenOne hundredThree hundred and twenty-two
FiftyThirty-two2"21/2"Seventy-sixOne hundred and twelveThree hundred and forty-eight
Sixty-fiveForty21/2"3"One hundred and tenOne hundred and thirty-fiveThree hundred and seventy
EightySixty3"4"One hundred and tenOne hundred and forty-fiveFour hundred and ten

Sixth, notice: if you A28H A28Y with a handle spring full open safety valve interested please consult or order according to the following requirements.
1, the safety valve product name and model of safety valve safety valve with the attachment so that we use for temperature and medium pressure using the safety valve and safety valve of your selection
2, if has the safety valve type design units selected Zhongwei company, please press the model directly to our sales department order.
3, the occasion is very important when using more complex or the environment when you try to provide design drawings and detailed parameters by our Zhongwei Control Engineer audit checks for you.


iangsu Zhongwei Measurement and Control Co., Ltd. is located in Huaian City, the hometown of Premier Zhou, a great man of one generation. It has beautiful scenery, pleasant climate and abundant products. Main Products: Main Products: Intelligent Vortex Street Flowmeter, Intelligent Electromagnetic Flowmeter, Liquid Turbine Flowmeter, Elliptical Gear Flowmeter, Universal Electronic Flowmeter, Magnetoelectricity Flowmeter, Swirl Flowmeter, Metal Tube Float Meter, Wilba Flowmeter, Delta Bar Flowmeter, Orifice Flowmeter, Balanced Flowmeter, Air Measuring Device, Heat Meter, Ultrasound Flow Meter Meters, magneto-sensitive electronic double-color liquid level gauge, boiler drum level gauge, mica double-color water level gauge, radar level gauge, ultrasonic level gauge, magnetic turning plate level gauge, level (level) switch, pressure differential pressure transmitter, thermometer, thermoresistor, thermocouple, display, recorder, calibration equipment, wire and cable, control valve, etc. Professional R&D and sales of industrial automation products, providing integrated technical services of industrial automation system, is a comprehensive industrial automation product R&D and technology enterprise in China, which is built and developed at the beginning of the industry scale.The company's quality assurance system is complete. The company has a number of high-tech professionals engaged in the design, development, installation and commissioning of automation control research for a long time, which provides a satisfactory set of systems for various industries. It gathers strong professional team, accumulates abundant technology and management experience, covers the national marketing network and branches, and can provide users with technical services quickly and conveniently. In the era of Internet commerce, the company has set up the E-Commerce Department, relying on professional network technology and e-commerce trade means, to implement the integration of traditional economy and resources as well as rapid market expansion in a wide range. Since its establishment, the company has established a long-term and stable business and trade partnership with manufacturers in various regions by virtue of its good reputation and high-quality service.In line with the business philosophy of "satisfying customer's needs and creating value for customers", we have provided a large number of complete sets of services for users in oil field, power, chemical industry, metallurgy, paper-making, cement and other industries for many years to improve more seamless services for our customers. You can purchase online, learn business knowledge independently, serve your customers better, and create more value for you for five consecutive years. Our products are sold overseas, and we have distribution agents in many regions to further increase domestic marketing and expand the brand of Zhongwei. From 2011, we will recruit agents and distribute in the whole country. We can also provide OEM services for you. The quality service is consistent with that of Jiangsu Zhongwei. We promise you the best quality, the best service and the best price!The company adheres to the development policy of "science and technology, innovation, quality and service", continues to adhere to the purpose of "building an industrial aircraft carrier and contributing to the national economy". In the future development, it will continue to devote itself to brand building and constantly cultivate new economic growth points. Jiangsu Zhongwei will actively participate in market competition with high-quality products, preferential prices and excellent services, and wholeheartedly participate in friends from all walks of life. Friends, old and new customers cooperate in good faith, work hand in hand with Zhongwei measurement and control, create a better tomorrow.
Similar Product Recommend