Membership
Help
Qingdao Yosion Intelligent Technology Co.,Ltd.
Qingdao Yosion Intelligent Technology Co.,Ltd.

Furnace Heating Elements
The silicon carbide rod has the characteristics of high temperature resistance, oxidation resistance, corrosion resistance, fast temperature rise, long service life, small deformation at high temperature, convenient installation and maintenance, and good chemical stability.
1. Silicon carbon rod is a high temperature resistance heating element, which is widely used in various high temperature electric furnaces.
2. The silicon carbide rod has good chemical stability and strong acid resistance. Alkaline substances have corrosive effects on it under high temperature conditions.
3. Silicon carbide rods can be divided into two types according to their diameters: thick end and equal diameter;
4. According to the functional shape, it can be divided into: straight rod, multiple heating section straight rod, U-shaped rod, W-shaped rod, single and double threaded rod, grooved rod, gun-shaped rod, gate-shaped rod, etc.
5. Diameters range from 12 mm to 54 mm. Special diameters can be customized according to requirements.
When inquiring, please provide the following dimensions: hot end diameter OD, hot end length HZ, cold end length CZ, total length OL and spacing A.


When silicon carbide rods are used, each group of rods should be matched with resistance, and the resistance tolerance of the resistance matching is: ≥¢12mm rod matching resistance, resistance value tolerance ≤0.2Ω≤c8mm rod matching resistance, resistance value tolerance ≤0.5Ω
1. During its use, the resistance value increases with the use of Lang. This phenomenon is called aging. The aging of the rod will cause the furnace temperature to decrease. For normal use, the voltage can be appropriately increased or the wiring method can be changed to compensate the furnace temperature.
2. When power is supplied, the voltage should be gradually increased. Generally, the voltage at the beginning should be half of the rated voltage to prevent excessive heating. Never overload operation when powering on
3. The best continuous use, continuous use can increase the life of the stick.
4. The silicon carbide rod is hard and brittle, so special care should be taken during loading, unloading and transportation.
5. The silicon carbide rod should be placed in a dry place to prevent the aluminum head from moisture deterioration.
6. The heated workpiece should not contain too much moisture, and should be dried in advance to avoid affecting the service life of the bar.
7. When silicon carbide rod is used in hydrogen, the rod will become brittle and shorten its service life.



