Welcome Customer !

Membership

XwbooEnvironmental ProtectionGas DetectorGas Alarm/Gas Detector/Gas SensorGas Detector KB-501AG
  • $item.Title
  • $item.Title

Gas Detector KB-501AG

ZhengZhou kesa Electronics Co., Ltd.

Model
KB-501AG
Nature of the Manufacturer
Other
Product Category
Gas Alarm/Gas Detector/Gas Sensor
Place of Origin
,
Gas Detector KB-501AG
The KB-501AG composite gas detector is a new type of multi-gas online gas detection instrument produced by our company.

Gas sensor main detection principles are: electrochemical, infrared, catalytic combustion, PID light ion and other principles of gas sensors, high-precision temperature and humidity sensors.

Combined with excellent SMD technology, it has good repeatability, long service life and easy operation.

Adapt to petroleum, chemical, tunnel, gas transmission and distribution, urban pipe corridor, biochemical medicine and other industries.
* Multi-gas, high sensitivity, long life, low drift, etc., stable operation;

* Self-test function of sensor failure, replace sensor in time, safer;

* Powerful sound and light alarm function;

* High-definition color display, intuitive and clear;

* 3 LEDs indicate fault, primary alarm, secondary alarm and relay output function;

* Bus RS485 (RTU), network transmission (optional), three (four) wire system 4 ~ 20mA (optional), switch quantity: 3

* Infrared remote control adjustment method, the detector can be adjusted without opening the cover, safe and convenient;

* Use explosion-proof design, suitable for dangerous conditions 1 and 2 areas;

Gas Parameter list

Applicable gas

Detecting Range

Alarm Threshold (Two-stage)

Low / High

NH3 (Ammonia)

0-100 PPM

25 PPM / 50 PPM

Cl2 (Chlorine)

0-50 PPM

0.5 PPM / 1.0 PPM

CH4O(methyl alcohol)

0-100PPM

Depending on customer’s request

H2 (Hydrogen)

0-1000 PPM

50 PPM / 100 PPM

CH20 (Formaldehyde)

0-10 PPM

Depending on customer’s request

H2S (Hydrogen Sulfide)

0-100 PPM

10 PPM / 20 PPM

HCl (Chlorine Hydride)

0-30 PPM

5 PPM / 10 PPM

O3(ozone)

0-20ppm

3.0 PPM / 5.0 PPM

HCN (Hydrocyanic Acid)

0-50 PPM

5 PPM / 10 PPM

PH3 (Phosphine)

0-20 PPM

0.3 PPM / 0.6 PPM

HF (Fluorine Hydride)

0-10 PPM

3 PPM / 10 PPM

AsH3 (Arsine)

0-1 PPM

Depending on customer’s request

CO (Carbon Monoxide)

0-500 PPM & 2000 PPM

35 PPM / 70 PPM

S02 (Sulfur Dioxide)

0-20 PPM

2 PPM / 4 PPM

ClO2 (Chlorine Dioxide)

0-50 PPM

0.3 PPM / 0.5 PPM

NO2 (Nitrogen Dioxide)

0-20 PPM

1.0 PPM / 2.0 PPM

CO2(infrared sensor)

0-20%VOL or 0-5000ppm

1.0%VOL/3.0%VOL 800ppm/1500ppm

C2H4O (Ethylene Oxide)

0-100 PPM

1 PPM / 10 PPM

NO (Nitrogen Monoxide)

0-250 PPM

25 PPM / 50 PPM

Combustible Gas Parameter List

Gas

Detecting Range

Alarm Threshold

Sensor Type

CH4

0-99%LEL

25%LEL / 50%LEL

Catalytic combustion sensor

C3H8

0-99%LEL

25%LEL / 50%LEL

H2

0-99%LEL

25%LEL / 50%LEL

NH3

0-99%LEL

25%LEL / 50%LEL

CH4O

0-99%LEL

25%LEL / 50%LEL

CH3CH3

0-99%LEL

25%LEL / 50%LEL

C2H4

0-99%LEL

25%LEL / 50%LEL

C4H10

0-99%LEL

25%LEL / 50%LEL

C4H8

0-99%LEL

25%LEL / 50%LEL

C7H8

0-99%LEL

25%LEL / 50%LEL

C2H7N

0-99%LEL

25%LEL / 50%LEL

C8H10

0-99%LEL

25%LEL / 50%LEL

C9H12

0-99%LEL

25%LEL / 50%LEL

C2H6O

0-99%LEL

25%LEL / 50%LEL

C3H4O

0-99%LEL

25%LEL / 50%LEL

C2H3Cl

0-99%LEL

25%LEL / 50%LEL

C2H7N

0-99%LEL

25%LEL / 50%LEL

C3H9N

0-99%LEL

25%LEL / 50%LEL

CH3Br

0-99%LEL

25%LEL / 50%LEL

Remark: The alarm threshold value can be adjusted based on customer’s request.

Some gas types are not listed. If any request, please contact the manufacturer.

Detection principle:

electrochemical, infrared, catalytic combustion, PID, photoion, and other detection gases: combustible gases (alkanes, alcohols, vinyls, ketones, gasoline, etc.);

Sampling method:

natural diffusion;

Test range:

combustible gas (0 ~ 99%) LEL;Toxic gases (Depending on the gas, the measurement range is different)

Resolution:

combustible gas 1% LEL; toxic gas 1ppm

Measurement error:

±5% of full scale; ±3% of alarm point

Display mode:

high-definition color screen;

Status indication:

3 LEDs indicate fault, primary alarm, secondary alarm;

Commissioning method:

infrared remote control or button;

Alarm mode:

LED indication alarm, relay output, sound and light alarm (optional)

Response time:

T90 ≤ 30 seconds;

Recovery time:

≤ 30 seconds;

Ambient temperature: -

40 °C ~ 70 °C;

Relative humidity:

≤95%RH; (non-condensing)

Explosion-proof mode:

flameproof type;

Explosion-proof level:

ExdIICT6;

Power source:

DC24V±25%;

Output signal:

bus RS485 (RTU), network transmission (optional), three (four) wire system 4 ~ 20mA (optional),

Switch quantity:

3

Power consumption:

≤3W;

Install ridges:

G1/2;

Maximum distance :

≤1000m;

Total weight:

≤2000g;

Pressure limit:

86kPa~106kPa;

Executive Standard:

GB15322

Implementation of the standard:

GB3836.1-2000 《爆炸性气体环境用电气设备 第1部分: 通用要求》

GB3836.2-2000 《爆炸性气体环境用电气设备 第2部分: 隔爆型“d”》

GB16808-1997 《可燃气体报警控制器技术要求和试验方法》

GB4208-93 《外壳防护等级(IP代码)》

GB/T13384-92《机电产品包装应用技术条件》

      Zhengzhou Kesa Electronics Co., Ltd. is a high-tech enterprise integrating the R&D, manufacturing and distribution of industrial instrumentations, established in 2002 in China. We have attained the independent import and export rights already. Moreover, we hold registered capital of 5 million RMB, with a manufacturing factory which covers about 2,000 square meters. 

We have an excellent R&D force and a young marketing team. As a professional supplier and agent of industrial instrumentations, we have been specializing in the field for more than 10 years. Now Kesa has three subsidiary companies, located in the cities of Shanghai, Beijing and Zhengzhou, and the business scope has covered nearly all the municipal areas of China. Our main products are industrial instrumentations, including two series and over 50 varieties, covering ultrasonic thickness meters and gas-detecting alarm devices. Gas-detecting alarm devices include portable gas-detecting devices, point type gas detectors, gas controllers and gas detecting control systems. The gas detectors are applied to combustible gas, toxic gas, oxygen and other several categories of gas. In addition, we are also able to establish video monitoring systems for schools, and they are effective to maintain a harmonious and safe campus environment. 

During the past ten years, depending on the advantage of technology, products, price, pre-sales and after-sales services, we have successful set up favorable and close relationships with partners in various fields covering petroleum, chemical industry, gas industry, electric power, environmental protection and energy saving, steel industry, metallurgical industry, pharmaceuticals industry and food service industry. 

Excellent products come from the mature business and good cooperation comes from the concept of good faith. We also carry out a strict quality management system in accordance with ISO9001 Requirement. We will insist on the principle of "survival relays on good quality, development relays on good reputation". We welcome you to create a beautiful future together with Kesa. 

If you are interested in some of our products, please do not hesitate to visit our website or contact us for further information. We are looking forward to establishing long-lasting business relationships with you in the near future.

Similar Product Recommend