Welcome Customer !

Membership

XwbooElectrical & ElectronicsLow Voltage ApplianceMiniature Circuit BreakerGas Insulated Switchgea PT Module
  • $item.Title
  • $item.Title

Gas Insulated Switchgea PT Module

Zhejiang Volcano electrical technology Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
Miniature Circuit Breaker
Place of Origin
,
SRM16-12kV series SF6 gas insulated ring main unit is installed on a galvanized plate frame, and the switch units are all in SF6 gas tank , which is made of corrosion-resistant and non-magnetic 3mm thick stainless steel plate. SF6 gas tank is a sealed pressure system which can...

QQ图片20191206154837


SRM16-12kV series SF6 gas insulated ring main unit is installed on a galvanized plate frame, and the switch units are all in SF6 gas tank, which is made of corrosion-resistant and non-magnetic 3mm thick stainless steel plate.SF6 gas tank is a 'sealed pressure system' which can operate for 20 years under normal working environment. The normal working pressure of SF6 gas is 0.15 ~ 0.4bar.  There is a  pressure release device installed with the gas tank, which can ensure the physical strength to release from the bottom or the rear when the pressure is too high.

◆ SWITCH UNIT

The load break switch adopts the coaxial rotation double break-point mode, and carries out kinetic energy operation by cooperating with the operation hole and sliding plate. At any moment, the switch can only be in one of the three states of "closing, opening and grounding", so as to completely avoid misoperation.

◆ OPERATING MECHANISM

The operating mechanism of the switch is installed in the front of the box, which is treated by special process, rust proof, convenient for manual operation and maintenance, and easy to realize electric operation.

◆ CABLE ROOM THAT REALLY MEETS THE NEEDS

The cable connection room has a large space, and the sleeve is of standard design, which realizes the coordination with all European standard cable plugs. Normally, each load break switch unit can be connected to the 1~3 return line, and the special design type can be connected with the 4~6 return line. The vacuum circuit breaker unit can be connected with 1~2 outgoing lines.

◆ PRESSURE RELIEF DEVICE

The pressure relief device and the cable room are separated by metal plates. If the pressure in the air box is too high, the explosion-proof diaphragm in the device will break to release the pressure.

◆ CABLE CONNECTION

The international standard general specification sleeve is selected to facilitate the user to select the corresponding cable accessories.

◆ ARRESTER CONNECTION

The load switch unit can be equipped with T-shaped back plug type silicon rubber fully sealed metal zinc oxide arrester. When the number of cable circuits is large and the space is not enough, the π - shaped back plug arrester can be used.

◆ INTERLOCKING MECHANISM

The interlock mechanism inside the switch can effectively prevent misoperation and ensure that the cable room can only enter when the switch is in the "grounded" state.

◆ AUXILIARY SWITCH

Load break switch and grounding switch can be equipped with auxiliary switch which can synchronously reflect the switch position state as required.

◆FUSE

The fuse is easy to replace. The fuse is placed in the insulating tube which is located in the metal gas box of SF6.

srm PT 模块

QQ图片20191206154212

Zhejiang Volcano-electrical technology is an ISO-9001 ISO-14001, ISO-18001 approved factory, professional in producing vacuum circuit breakers, auto-reclosers, disconnectors, load break switch and switchgear. The factory occupies a manufaturing square over 1000㎡ and has several advanced production line with mechanical operation. We make constant efforts to improve product quality and service. Our company has get many patent certifications and products have passed type testing. We can provide a complete set of transmission and distribution. To offer the best quality with our best service is our main management principal.
Similar Product Recommend