Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesGas Leak Detection Device
  • $item.Title
  • $item.Title

Gas Leak Detection Device

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HuBei, WuHan
Measuring range (SF6): 0.01ppm~500ppm (volume ratio)Response time: no more than 3 secondsIndication mode: LCD digital display and sound and light signal alarmAlarm setting range: 0.01ppm~500ppm (volume ratio)Pumping speed of vacuum pump: 0.5L/secVacuum pipe length: 4 metersContinuous working time: no more than 4 hoursWorking conditions: AC power supply 220V 50Hz
Product profile


The principle of the SF6 gas leak detection device is: when the concentration of sulfur hexafluoride gas contained in the air changes, the degree of ionization of the mixed gas under the action of high-frequency electromagnetic field will also be different, and the degree of ionization can be reflected by detecting the degree of ionization. Sulfur concentration.

The Gas Leak Detection Device uses a small vacuum pump, and the probe and the host are separated. It has the characteristics of small size, light weight, convenient carrying, high sensitivity, good stability, fast response speed, the probe will not be poisoned, and no toxic gas will be produced. And there is a liquid crystal display gas concentration, making the instrument reading more convenient and accurate.

The Gas Leak Detection Device has a new alarm setting function, when the measured gas concentration is greater than or equal to the set value, it will automatically sound an alarm.

This Gas Leak Detection Device is specially used in electric power, railway, electrical appliance manufacturing, chemical industry, fire-fighting equipment, and atomic physics scientific research departments for leak detection of equipment and containers filled with sulfur hexafluoride. It can quickly and accurately detect qualitatively and quantitatively.


ITechnical parameter


Measuring range (SF6): 0.01ppm~500ppm (volume ratio)

Response time: no more than 3 seconds

Indication mode: LCD digital display and sound and light signal alarm

Alarm setting range: 0.01ppm~500ppm (volume ratio)

Pumping speed of vacuum pump: 0.5L/sec

Vacuum pipe length: 4 meters

Continuous working time: no more than 4 hours

Working conditions: AC power supply 220V 50Hz

Environment temperature 7℃-40℃

Relative humidity is not more than 85%

Power: about 180W

Whole machine weight: about 15Kg


Product structure

1

1 Detection switch

2 Power switch

3 power socket

4 AC fuse (0.5A)

5 DC fuse (5A)

6 Host

7 Needle valve

8 Handheld probe

9 LCD display

10 Nuttons

11 Ionization chamber observation window

12 Gas and electricity pipeline


Attention


1. Keep the entire Gas Leak Detection Device clean and tidy to prevent debris from entering the probe and vacuum pump. The entire instrument should be placed in a ventilated and dry place to avoid moisture.

2. The probe needle valve of the instrument has been adjusted before leaving the factory, generally do not adjust. Due to improper use or some reasons, the needle valve position changes, the needle valve should be re-adjusted until the amount of air intake is appropriate. The output voltage and signal output value of the three adjustable potentiometers inside the probe have been adjusted before leaving the factory. Generally, no adjustment is required. If adjustment is required, please refer to the technical parameters of the instrument for adjustment, otherwise the internal components of the instrument will be burned out. Device. Every time the instrument adjusts the internal potentiometer, the instrument must be re-calibrated, otherwise the measurement data will be inaccurate.

3. Due to long-term use, the aging of the "O"-shaped rubber gasket at the needle valve connection port will cause air leakage at the connection to affect the vacuum degree, and it should be replaced immediately.

4.The instrument must not be turned upside down or vibrated violently to prevent the probe and the adjustable components in the machine from leaving the position and affecting the performance of the instrument.

5.If the instrument is turned on, if there is a screen or no display, press the key and then the exit key to refresh.

2


After-sale service


1.First-use responsibility system

After the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part

2.One year warranty

All products warranty is 1year, life-time maintenance .

During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !

3.Trouble-shooting

fault that users can solve by themselves, we guarantee to give timely telephone guidance and bear the necessary cost .

If meet any fault not impossible to be solved by end-user, we will afford the best solution within 24 hours . Produce will be repaired within 10 days and delivery back to customer.


After-sales Service Commitment


1.We guarantee that professional engineers and technicians will answer qustions by telephone, or other channel within 1 hour, deal with equipment failure in time within 24 hours.

2.Upon receipt of the client's request for after-sales service,we promises to provide solutions within 48 hours.

3.We will provide relevant technical training and technical information according to client's requirements.

4.The product can be repaired free of charge for one year and maintained for life.

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend