Welcome Customer !

Membership

XwbooInstrumentationFlow MeterGas MeterGas turbine flowmeter
  • $item.Title
  • $item.Title

Gas turbine flowmeter

Kaifeng Henghe Flow Meter Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Gas Meter
Place of Origin
HeNan, KaiFeng

Kaifeng Henghe Flow Meter Co., Ltd.

Contact

Manager Bian

Phone

13523785668

Fax

86-371-25616199
The LWGQ gas turbine flowmeter is a high-precision, high-reliability gas precision metering that integrates temperature, pressure, flow sensors and intelligent flow totalizers, which is developed by itself by integrating theories of gas mechanics

  Product Name: Gas Turbine Flowmeter

  I. Overview

  The LWGQ gas turbine flowmeter is a high-precision, high-reliability gas precision metering that integrates temperature, pressure, flow sensors and intelligent flow totalizers, which is developed by itself by integrating theories of gas mechanics, fluid mechanics, and electromagnetics. The instrument has low and high pressure metering performance, multiple signal output methods and low sensitivity to fluid disturbances. It is suitable for the metering of natural gas, coal gas, liquefied gas, light hydrocarbon gas and other gases.

  This product has been approved by the national explosion-proof product quality inspection department in accordance with GB3836.2000 "Electrical Equipment for Explosive Gas Atmosphere Part 1: General Requirements", GB3836.2-2000 "Electrical Equipment for Explosive Gas Atmosphere Part 2: Flameproof Type "d" 》And GB3836.4-2000 "Electrical Equipment for Explosive Gas Atmosphere Part 4: Intrinsically Safe Type "i"" standard inspection, and the explosion-proof marks are ExdⅡBT6 (flameproof type), ExiaⅡCT6 (intrinsically safe type). It is suitable for hazardous locations in zone 0 (intrinsically safe only) and zone 2 containing explosive gas mixtures of T1~T4 temperature groups of ⅡA, ⅡB, and ⅡC.

  2. Product features

  Special instrument for gas metering

  Special instrument for oil and gas recovery system

  High accuracy, generally up to ±1.5%R, ±1.0%R

  Good repeatability, short-term repeatability can reach 0.05%-0.2%. It is precisely because of its good repeatability that it is the preferred flow meter in trade settlement;

  The starting flow is low, and the low flow velocity, small measurement range is introduced.

  It can detect the temperature, pressure and flow of the gas to be measured, can automatically track and compensate the flow, and display the cumulative volume of gas under standard conditions (Pb=101.325KPa, Tb=293.15K); real-time query of temperature, pressure, time, Numerical values ​​such as dates.

  Built-in pressure and temperature sensors, high safety performance, compact structure, beautiful appearance

  The instrument has explosion-proof and protection functions, the explosion-proof mark is ExdⅡBT6, ExiaⅡCT4, and the protection grade is IP65

  The system works with low power consumption, a 3V10AH lithium battery can be used continuously for more than 3 years

  The meter coefficient and cumulative flow value will not be lost for ten years after power failure

  Three, working principle

  When the fluid flows into the flowmeter, it is rectified and accelerated by the special integrated rectifier at the air inlet. Because the turbine blades and the fluid flow are at a certain angle, the turbine generates a rotating torque. After overcoming the friction torque and the fluid resistance torque, the turbine starts Spin. Within a certain flow range, the angular velocity of the turbine rotation is proportional to the fluid volume flow. According to the principle of electromagnetic induction, the magnetic sensor is used to induce a pulse signal proportional to the fluid volume flow rate from the coaxial rotating signal wheel. The signal is amplified, filtered, and reshaped and enters the intelligent flow totalizer together with the temperature and pressure sensor signals. The micro-processing unit of the instrument performs arithmetic processing, and directly displays the volume flow and total volume of the gas on the LCD screen.

  4. Basic parameters and technical performance

  1. Basic parameters: (Table 1)

Instrument diameter (mm) and connection method20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300 use flange connection (below 40, including 40 caliber can be used as thread)
Accuracy class±1.5%R, ±1%R, ±0.75%R (specially required)
Turndown ratio1:10:1:20:1:30
Instrument materialMeter body: 304 stainless steel; impeller: anti-corrosion ABS or high-quality aluminum gold; display: cast aluminum
Measured medium temperature (℃)-30℃~+80℃
Environmental conditionsTemperature: -20℃~+60℃, relative humidity 5%~90%, atmospheric pressure 86~106KPa
output signal

Sensor: pulse frequency signal, low level ≤0.8V, high level ≥8V

Transmitter: two-wire system ~ 20mADC current signal

Power supply

Sensor: +12VDC, +24VDC (optional)

Transmitter: +24VDC

On-site display type: the meter comes with 3V lithium battery

Signal transmission lineSTVPV3×0.3 (three-wire system), 2×0.3 (two-wire system)
Transmission distance≤1000m
Signal line interfaceInternal thread M20×1.5
Explosion-proof gradeExdIIBT6, ExiaⅡCT4
Protection levelIP65

 

  2. Technical performance:

Model specificationDisplay and output modePower supply
LWGQ-NThree-wire working condition pulse, low level ≤0.8V, high level ≥8V (no display on site)External power supply DC12V-24V
LWGQ-ATwo-wire system, working condition 4~20mA (no display on site)External power supply DC24V
LWGQ-BWith multi-point accuracy correction, the instantaneous flow and cumulative flow can be displayed simultaneously on the spot. The method is as follows:
Q XXXX four-digit instantaneous flow (m3/h)
XXXXXXXX eight-digit cumulative flow (m3)
Note: The cumulative flow starts counting from 00.000000, Automatically expand the display accuracy and record it to 999999.99. The accumulated flow value can be cleared, and the meter coefficient and accumulated flow value will not be lost for ten years after power failure.
Built-in 3V10AH lithium battery power supply
LWGQ-COn the basis of LWGQ-B (on-site display type), 4-20mA current output is added under working conditionsExternal power supply DC24V
LWGQ-DOn the basis of LWGQ-B (on-site display type), built-in temperature and pressure sensors are added to automatically compensate and correct the flow of different conditions. The temperature, pressure, battery power and other values ​​can be queried at the same time. It can output standard condition 4-20mA current, working condition pulse signal, standard condition pulse signal, IC card signal, RS485 communication protocol.3V10AH lithium battery or external power supply DC24V (signal output is required, external power supply is required)

 

  Kaifeng Henghe Flow Meter Co., Ltd. is an emerging enterprise specializing in industrial process automation control and the research, development, production and service of intelligent meters. The company is located in Kaifeng, an ancient capital of the Eight Dynasties. Kaifeng Instrument Industry was founded in 1958. The National Water Flow Metering Station and the Flow Meter Product Quality Inspection Center of the Ministry of Machinery Industry are located here. There are a large number of senior flow meter production and R&D engineering and technical personnel. The company has strong technical force and has passed ISO90001 quality system certification, ISO14001 environmental management system certification, ISO45001 occupational health and safety management system certification, and various flowmeter production licenses. The main products are: electromagnetic flowmeter series (high pressure type, submersible type, sanitary type, plug-in type, etc.), vortex flowmeter series, turbine, differential pressure flowmeter series (standard orifice, standard nozzle, V cone, wedge, etc.) Annular orifice plate, balance orifice plate, venturi tube) and large, medium and small liquid flow calibration device. The company has built four sets of water flow standard devices DN15-DN50, DN65-DN300, DN350-DN700, and DN800-DN2000. The accuracy of the standard meters on the devices are all 0.2 level. The company’s product specifications are complete and can meet liquid, gas, steam, etc. For flow measurement of multiple media, each flowmeter is qualified for the actual flow calibration before leaving the factory. The factory has an automatic control system engineering department, which undertakes complete sets of automatic control projects. Products are widely used in nuclear power, chemical, electric power, petroleum, petrochemical, coal, sewage treatment, animal husbandry, urban water supply, agricultural irrigation, heating, metallurgical coking, machinery, papermaking, medicine, food processing and other industries. And exported to most countries. Based on the tenet of "Today's Quality, Tomorrow's Market", we attach importance to product quality and provide users with high-quality commissioning guidance, technical training, product maintenance, re-schooling and spare parts supply in a timely manner. Kaifeng Yokogawa Instruments is willing to make progress hand in hand with the majority of users in flow meters to create brilliance together.
Similar Product Recommend