Welcome Customer !

Membership

XwbooElectrical & ElectronicsPower Distribution & Transmission EquipmentDistribution CabinetGCS
  • $item.Title
  • $item.Title

GCS

Qingdao SICO Electric Equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Distribution Cabinet
Place of Origin
,
GCS Low Pressure Extraction Switching CabinetThe CS type low-voltage pull type switchgear is designed and developed by the two joint design teams according to the requirements of the industry authorities, the majority of power users and design units, and has high technical performance indicators. Low-voltage pull type switchgear that can meet the needs of power market development and can compete with existing imported products. In power plants, petrochemical systems and other high degree of automation, requires int......

Product details:

Model Meaning
Conditions for use
1. For indoor use, the altitude of the place of use must not exceed 2000m.
2. The ambient air temperature is not higher than +40 degrees and not lower than -5 degrees. The 24-hour average temperature is not higher than +35 degrees. When it exceeds, it must be operated in accordance with the actual situation.
3. The relative humidity of the surrounding air does not exceed 50 % at a maximum temperature of 40 degrees, and a higher relative humidity is allowed at a low temperature: if it is 90 % at +20 degrees, it should be taken into account that due to changes in temperature, clotting may occur accidentally. effect.
4. The inclination of the installation and vertical surface does not exceed 5 degrees, and the entire set of cabinets is relatively flat.
5. The device shall be installed in a place where there is no severe vibration and impact and where it is not sufficient to cause undue corrosion of the electrical components.
When the user has special requirements, he may negotiate with the manufacturer.
Main technical parameters
Main circuit scheme
The main circuit scheme of the switching device has a total of 32 sets of 118 specifications, excluding schemes and specifications derived from changes in the control and protection of the auxiliary circuit. Including the needs of power generation, power supply and other power users, the rated operating current is 4000A, suitable for distribution Transformers of 2500 KVA and below.
In addition, a capacitor compensation cabinet is designed to meet the needs of increasing the power factor. Considering the needs of the integrated investment, the reactor cabinet is designed.
Auxiliary circuit scheme
The GCS auxiliary circuit can be divided into DC operation and AC operation.
The auxiliary circuit of the DC operation part is mainly used for the low-voltage plant system of the power plant substation. Suitable for low voltage plant system, working power feed, power feeder and electric feeder for 200 MW and below and 300 MW and above capacity units.
The auxiliary circuit of the AC operation part is mainly used for the low-voltage system of the substation of factories, mines and high-rise buildings. The combination of Yushuang power supply operation control is applicable. It also has a control circuit such as Operation electric interlock spare self-cast and self-recovery.
The DC control power supply is 220V or 110V DC, and the AC control power supply is 380V or 220V AC, a set of cabinets composed of drawer units. The 220V control power supply is quoted from the public control power supply that specifically controls the transformer power supply in this cabinet. The public control power supply adopts the UnGrounded method to control the transformer, and the 24V power supply is left for use when the weak signal light is needed.
Structural characteristics
1. The main frame of the device adopts 8MF steel, and the frame adopts two structural forms: assembly and partial welding. The main architecture is equipped with modular holes E = 20mm.
2. Each function room of the device is strictly separated, and its compartment is mainly divided into a function unit room, a bus room, and a cable room. The functions of each unit are relatively independent.
Installation and use
After the product arrives the receiving place, should check the package is complete without damage first, find out the problem should inform the relevant Department of contract to do business record in time, analyse the reason together, do Visa and aftercare. For products that are not immediately installed, they should be placed in an appropriate place for safekeeping in accordance with normal conditions of use and the requirements of temporary storage of electrical equipment.
1. The installation of the product should follow the schematic diagram. The basic groove steel and bolts used in bolt fixation are owned by the user. When the main bus is connected, if the surface is uneven due to transportation, custody, etc., it must be flattened and then connected and tightened.
2. When the device is installed individually or in a row, the vertical degree and the deviation of the cabinet surface and the gap between the cabinets shall comply with the regulations.
Use caveats
1. The device is a low-voltage distribution cabinet that is not installed against the wall, is operated on the front, and is maintained on both sides. The maintenance channel and door of the cabinet must be a qualified professional to enter or open for operation, inspection and maintenance.
2. Air circuit breakers and plastic shell circuit breakers are divided several times, especially after short-circuit separation. After closing, contact parts will be burned and carbon materials will be produced, and the contact resistance will increase. Maintenance and overhaul should be carried out according to the circuit breaker's instructions.
3. After installation and maintenance, the segregation between the compartments and the functional units must be strictly checked to ensure that the device is well separated from each other to prevent failure and expansion.


Established in 2002, Qingdao SICO Electric Equipment Co., Ltd. is a professional industrial control automation company integrating product innovation, scientific and technological research and development, production and manufacturing, market sales and after-sales service. Up to now, the company has won the unanimous trust and full support of cooperative customers with advanced business model, efficient service process and leading professional technology. At the same time, the company has long been committed to the production, promotion and application of industrial automation control system and industrial electrical appliances. All products of the company are widely used in military, construction, machinery, metallurgy, chemical industry, oil refining and other industries, and have been recognized and supported by many enterprises.The company's products include: XL-21 power cabinet, GGD, GCK, MNS distribution cabinet, PLC control cabinet, frequency conversion cabinet, buck start cabinet and other low-voltage complete sets of equipment, as well as SKFCS field bus computer monitoring system. At the same time, it can provide customers with the design, manufacture, installation and debugging of energy-saving schemes of frequency conversion speed regulation system, DC speed regulation system and PLC programmable control system.The company also produces UPS, EPS uninterruptible power supply, ATS dual power supply, frequency conversion power supply, SDW high-power regulator, various instruments, high and low voltage electrical appliances, thermocouples, pressure transmitters and other products. The engineers and technicians of the company are engineers and senior engineers who have been engaged in automation research for many years. They have accumulated a wealth of practical and problem-solving experience in pipeline transformation, design and installation, remote monitoring and automation, sewage treatment engineering, central air conditioning, fan and pump boiler heating control system and constant pressure water supply. After years of development, the company has become a distributor of many famous brands at home and abroad, such as OMRON, ABB, Schneider, Mitsubishi, SICK, Shenguan, AUTONICS, LS, META, Siemens, etc. It is also a well-known brand product of Taiwan Shiyan, Taiwan Ruisheng, Meilan Rilan, Xiamen Yudian, Shanghai Haoying, Shanghai Thermal Engineering and so on. Qingdao exclusive agent of products.At present, the company is a member unit of the Electrical Industry Association and the China Power Supply Society, and has been awarded the honorary titles of "China AAA Class Credit Enterprise", "Chinese Consumers Trusted Products", "Qingdao Contract and Credit Keeping Enterprise", "Industrial and Commercial Bank Credit AAA Enterprise" and "Key High-tech Enterprises". Some product types are exported to Southeast Asia and Africa.We uphold the pragmatic, efficient, cooperative and win-win service purpose, with competitive prices, innovative research and development, systematic management, and humanized services to win the recognition of market customers and partners, to provide all customers with perfect and scientific system solutions and brand services.We will cooperate with you with quality and credibility. We sincerely invite you to visit our company and discuss cooperation.
Similar Product Recommend