Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineGenerator Characteristics Tester
  • $item.Title
  • $item.Title

Generator Characteristics Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
Access characteristics of 12 channels of signals:0∽150V AC voltage 3 groups (secondary voltage of stator)0∽750V AC voltage 3 groups (secondary voltage of exciter stator)0∽10mA alternating current 3 groups (secondary current of stator via clamp current sensor)0∽±75mV DC voltage 2 groups (generator rotor current)0∽±1000V DC voltage 1 group (generator rotor voltage)
I. Overview


The Generator characteristics tester is specially designed to complete the electrical start-up test after the overhaul of the generator set of the power plant. It can complete various characteristic curves of the generator (generator no-load, short circuit, de-excitation, zero-start, ±10% step, The real-time measurement and analysis of frequency test and load test of exciter, etc., have the characteristics of multiple measurement signals and high accuracy.

II. Technical Features


1. Use standard interfaces to meet the needs of various power plants (thermal power plants, hydropower plants, nuclear power plants, etc.).

2. Data can be collected automatically or interactively.

3. Real-time drawing of characteristic curves makes the test more intuitive.

4. The waveform can be compared, and the measured data and historical data can be compared with the same coordinates to facilitate judgment.

5. The detection data is stable, accurate and reliable, so that the overhaul of the motor can be correctly judged to ensure the normal operation of the generator.

6. Using chart output mode, it is easier to analyze, judge and archive.

7. Adopt industrial computer motherboard, integrated design of large-screen LCD display and test unit, higher reliability

8. The system has a high degree of program control, which greatly reduces the complexity of testing and improves work efficiency and safety.

9.6 Voltage signal processing adopts advanced electromagnetic induction and photoelectric isolation principle, which has high test accuracy, fast response time and stable performance. Input and output are completely isolated, the isolation voltage is greater than 3KV, the overload capacity can last twice the nominal voltage (3-phase 150V, 3-phase 750V), and the input impedance is greater than 150KΩ (or 750 KΩ).

10.3 current signal processing adopts clamp-type current sensor, convenient and safe on-site wiring, high test accuracy, fast response time and stable performance. Input and output are completely isolated, the isolation voltage is greater than 3KV, the continuous overload can be 2 times the nominal value, and the instantaneous overload is 20 times 60 seconds.

III. Technical performance


1. Access characteristics of 12 channels of signals:

0∽150V AC voltage 3 groups (secondary voltage of stator)

0∽750V AC voltage 3 groups (secondary voltage of exciter stator)

0∽10mA alternating current 3 groups (secondary current of stator via clamp current sensor)

0∽±75mV DC voltage 2 groups (generator rotor current)

0∽±1000V DC voltage 1 group (generator rotor voltage)

2. Precision:

12-channel signal accuracy 0.5 level

A/D sampling 12 bits, rate 125kHz

3. Response time: ≤20ms

4. Two USB ports: use for data export

5. Starting mode: manual; automatic

6. Power supply: AC220±10%

7. Instrument appearance: 330×310×202, instrument weight: 15kg

IV. test preparation


The signal access is on the cover of the instrument. The wiring terminal layout and definition are as follows

details

1: The generator stator voltage is connected to the terminal.

2: The generator stator current and the main exciter stator current are multiplexed terminals. The signal is connected through the clamp-type current sensor provided at the machine, and the secondary current of the stator cannot be connected directly.

3: The main exciter stator voltage access terminal.

4: Connect the generator rotor voltage to the terminal.

5: The generator rotor current is connected to the terminal. The signal is a DC 75mV signal connected through a shunt.

6: The rotor current of the main exciter is connected to the terminal. The signal is a DC 75mV signal connected through a shunt.

For the three signals of Uf, If, and Ilf, you must pay attention to the positive and negative directions. The unused DC parameter channels are short-circuited with short-circuit wires.

Use a clamp-type current sensor to clamp the secondary current wiring of the generator (or main exciter) stator, and connect the leads of the clamp to the signal interfaces Ia, Ib, and Ic according to the different phases Ia, Ib, and Ic.

The ground terminal on the rear panel of the instrument is connected to the system ground through a wire.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend