Welcome Customer !

Membership

XwbooElectrical & ElectronicsPower Distribution & Transmission EquipmentDistribution CabinetGGD
  • $item.Title
  • $item.Title

GGD

Qingdao SICO Electric Equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Distribution Cabinet
Place of Origin
,
GGD Low Pressure Fixed Switching CabinetThe GGD AC low-voltage distribution cabinet is suitable for AC 50HZ, rated operating voltage 380V, rated operating current to 3150A distribution system for power plants, substations, factories and mines, etc.. Power conversion, lighting and distribution equipment, Distribution and control.GGD type AC low-voltage distribution cabinet is a new type of low-voltage distribution cabinet designed according to the requirements of the competent Department of energy, the majority of p......

Product details:

Model Meaning
Normal conditions of use
1. The ambient air temperature is not higher than +40 degrees and not lower than -5 degrees. The average temperature within 24h must not be higher than +35 degrees.
2. In-house installation and use, the altitude of the use site must not exceed 2000m.
3. The relative humidity of the surrounding air does not exceed 50 % at a maximum temperature of +40 degrees, and a larger relative temperature is allowed at a lower temperature. (For example, 90 % at +20 degrees) consideration should be given to the possible accidental effect of condensation due to changes in temperature.
4. The tilt of the device and vertical surface does not exceed 5 %.
5. The equipment should be installed in places where there is no severe vibration and impact, and where there is not enough corrosion of electrical components.
6. Users can negotiate with the manufacturer when they have special requirements.
Electrical performance
1. Basic electrical parameters
2. Main circuit scheme
The main circuit of the GGD cabinet is designed with 129 schemes and a total of 298 specifications(excluding the schemes and specifications derived from the changes in the function of the auxiliary circuit and the changes in the control voltage).
Among them, GGD1 49 schemes 123 specifications
GGD2 53 scheme 107 specifications
GGD3 27 programmes 68 specifications
The main circuit scheme is designed and selected using the opinions of the department. Programmes for power plants have been increased. The rated current is increased to 3150A, which is suitable for distribution Transformers with 2000 KA and below.
In addition, GGD1 and GGD2 capacitor compensation cabinets are designed to meet the needs of reactive power compensation. There are 4 main circuit schemes and a total of 12 specifications.
3. Auxiliary circuit scheme
The design of the auxiliary circuit is divided into two parts: the power supply scheme and the power plant scheme. There is enough space in the GGD cabinet to install secondary components. At the same time, a dedicated LMZ3D current Transformer has been developed to meet the power plant and special users. The need for power outage protection.
4. Main bus
Considering the price and feasibility of using aluminum instead of copper, the rated current uses a single aluminum row busbar at or below 1500A. Double copper row busbars are used when the rated current is greater than 1500A. The production plant manufactures the prototype according to this provision and passes the type test. Of course, the manufacturer can also replace the aluminum bus with the same amount of copper bus according to the user's requirements.
5. Electrical Component Selection
A. GGD cabinets mainly use more advanced electrical components that can be mass-produced in China, such as ME, DZ20, DW15, etc.. At the same time, according to economic and reasonable principles, some of the old products that can be used are preserved under full consideration of feasibility. Do not choose your products.
b.HD13BX and HS13BX rotary operating knife switches are special components designed to meet the needs of the unique structure of the GGD cabinet. They change the mechanical operation and retain the advantages of the old product. They are a utility model. Electrical components.
C. If the design department selects new electrical components with better performance and advanced technology according to the needs of users, due to the good installation flexibility of the GGD cabinet, it will generally not be difficult to update the manufacturing and installation of electrical components.
D. In order to further improve the dynamic stability of the main circuit, a special ZMJ combined busbar and insulation support for the GGD cabinet was designed. Bus clips are hot molded by high-strength, high-yin type PPO alloy materials, high insulation strength, good self-extinguishing performance, and unique structure. Simply adjust the block interblock to easily combine into single bus clips or double bus clips. Insulation support is a sleeve type die structure, low cost, high strength, to solve the old product climbing distance is not enough defect.
Product package
The following documents should be provided by the manufacturing plant when supplying the goods.
1. Packing list
2. Product Certificate
3. Use instructions
4. Factory Test Report
5. Related Electrical Drawings
6. Door keys, handling handles and spare parts as stipulated in the contract
Structural characteristics
1. The cabinet of the GGD type AC low-voltage power distribution cabinet adopts the form of a general cabinet. The frame is assembled with partial welding of the 8MF cold curved steel plate steel. The frame parts and special supporting parts are supplied by the designated steel production factory to ensure the accuracy and quality of the cabinet. The spare parts of the general cabinet are designed according to the principle of the module, and have a 20-mode installation hole with a high general coefficient. It can facilitate the factory to achieve pre-production.
2. GGD cabinet design takes full account of the heat dissipation problem in the operation of the cabinet. There are a different number of heat sink holes at the upper and lower ends of the cabinet. When the electrical components in the cabinet are heated, the heat rises and is discharged through the upper slot, while the cold wind is continuously supplemented by the lower slot. The sealed cabinet forms a natural ventilation channel from the bottom up to achieve the purpose of heat dissipation.
3. According to the requirements of modern industrial product modeling design, the GGD cabinet adopts the method of golden section ratio to design the shape of the cabinet body and the segmentation dimensions of each part, making the overall beauty and generosity, and a new face.
4. The cabinet door is connected to the frame with a rotating hinge, which is easily installed and disassembled. There is a mountain rubber strip embedded in the edge of the door. When the door is closed, the bar between the door and the frame has a certain compression stroke, which can prevent the door from colliding directly with the cabinet, and also improves the protection level of the door.
5. The instrument door with electrical components is connected to the frame with multiple strands of soft copper wire. The mounting parts in the cabinet and the frame are connected with a roller screw, and the whole cabinet constitutes a complete grounding protection circuit.
6. The cabinet decent paint chooses the polyfat orange baking paint. Strong adhesion, good texture. The whole cabinet has a sublight tone, avoiding glare effects and creating a more comfortable visual environment for the duty personnel.
7. The top cover of the cabinet can be removed when needed to facilitate the assembly and adjustment of the bus line on the spot. The four corners of the cabinet top are equipped with hanging rings for lifting and loading.
8. The anti-expansion level of the cabinet body is IP30, and users can also choose between IP20-40 according to the requirements of the use environment.


Established in 2002, Qingdao SICO Electric Equipment Co., Ltd. is a professional industrial control automation company integrating product innovation, scientific and technological research and development, production and manufacturing, market sales and after-sales service. Up to now, the company has won the unanimous trust and full support of cooperative customers with advanced business model, efficient service process and leading professional technology. At the same time, the company has long been committed to the production, promotion and application of industrial automation control system and industrial electrical appliances. All products of the company are widely used in military, construction, machinery, metallurgy, chemical industry, oil refining and other industries, and have been recognized and supported by many enterprises.The company's products include: XL-21 power cabinet, GGD, GCK, MNS distribution cabinet, PLC control cabinet, frequency conversion cabinet, buck start cabinet and other low-voltage complete sets of equipment, as well as SKFCS field bus computer monitoring system. At the same time, it can provide customers with the design, manufacture, installation and debugging of energy-saving schemes of frequency conversion speed regulation system, DC speed regulation system and PLC programmable control system.The company also produces UPS, EPS uninterruptible power supply, ATS dual power supply, frequency conversion power supply, SDW high-power regulator, various instruments, high and low voltage electrical appliances, thermocouples, pressure transmitters and other products. The engineers and technicians of the company are engineers and senior engineers who have been engaged in automation research for many years. They have accumulated a wealth of practical and problem-solving experience in pipeline transformation, design and installation, remote monitoring and automation, sewage treatment engineering, central air conditioning, fan and pump boiler heating control system and constant pressure water supply. After years of development, the company has become a distributor of many famous brands at home and abroad, such as OMRON, ABB, Schneider, Mitsubishi, SICK, Shenguan, AUTONICS, LS, META, Siemens, etc. It is also a well-known brand product of Taiwan Shiyan, Taiwan Ruisheng, Meilan Rilan, Xiamen Yudian, Shanghai Haoying, Shanghai Thermal Engineering and so on. Qingdao exclusive agent of products.At present, the company is a member unit of the Electrical Industry Association and the China Power Supply Society, and has been awarded the honorary titles of "China AAA Class Credit Enterprise", "Chinese Consumers Trusted Products", "Qingdao Contract and Credit Keeping Enterprise", "Industrial and Commercial Bank Credit AAA Enterprise" and "Key High-tech Enterprises". Some product types are exported to Southeast Asia and Africa.We uphold the pragmatic, efficient, cooperative and win-win service purpose, with competitive prices, innovative research and development, systematic management, and humanized services to win the recognition of market customers and partners, to provide all customers with perfect and scientific system solutions and brand services.We will cooperate with you with quality and credibility. We sincerely invite you to visit our company and discuss cooperation.
Similar Product Recommend