Welcome Customer !

Membership

XwbooEnvironmental ProtectionDust Removal EquipmentDust CollectorGrinding / Polishing Dust Collector
  • $item.Title
  • $item.Title

Grinding / Polishing Dust Collector

Dongguan Pure-Air Tech Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Dust Collector
Place of Origin
GuangDong, DongGuan
Pure-AIr PA-2500DM / PA-3000DM /PA-4500DM / PA-6000M polishing dust collector is suitable for the purification of smoke and harmful gases generated in the polishing process of various materials.

Working Principle

The high-performance fan in the purifier generates negative pressure and sucks the smoke and exhaust gas into the filter, which is purified by the imported High efficiency filter cartridge and discharged indoors. The filter cartridge can be repeatedly used after being sprayed with compressed air.

dust collector for grinding

Features and advantages


(1). Special structure design, small volume, low operating noise, and movable;

(2). Using special aluminum alloy impeller and Siemens Three phase motor, perfect combination of negative pressure and flow; stable operation, low failure rate, continuous operation;

(3). Set the main power switch, the electric control element adopts thermal overload protection, phase loss and phase sequence protection, high safety, and can realize remote control and linkage control functions;

(4). Japanese Toray high-efficiency membrane filter cartridge is standard configuration, and the dust filtration efficiency is up to 99.7%@0.3 microns (note: our company's self-test);

(5). A fire-stop device is installed at the Inlet to prevent direct contact between sparks and the filter cartridge and damage the filter cartridge;

(6). A manual dust removal door is set to clean the dust inside the machine to prevent dust leakage;

(7). The universal joint suction arm can hover at any position at 360 degrees. The Smoking hood adopts a large-caliber design to inhale smoke and dust with maximum efficiency; the Smoking arm hose is made of polyester, which is fire-resistant and flame-retardant.

Product Detail

♦ The power system adopts Siemens three-phase asynchronous motor, equipped with special customized aluminum alloy impeller, perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, and can work continuously for 24 hours.

dust collector Simens motor

♦The main electronic control components of the electrical system adopt the international famous brand-French Schneider. Independent control of electric box, built-in AC contactor, thermal overload protection, phase sequence protection such as phase loss and reverse phase. The control panel is simple and clear, and can easily realize the remote linkage control function.

Schneider Electronic Components

♦ High-efficiency PTFE coated filter cartridge, high filtration accuracy   The filter system is equipped with Japanese Toray PTFE membrane filter cartridges as standard, and the filtration accuracy for dust with a diameter of 0.3 microns or more can reach 99.5% or more. A variety of filter cartridges of different materials are also available.

♦Patented automatic rotating pulse back-blowing technology, the cleaning effect is 3 times higher than the traditional method   The pulse blowback system is composed of gas storage tank, solenoid valve, pulse controller, automatic rotating injection components, etc.

When the pulse controller sends out a pulse signal, the solenoid valve starts to work. The high-pressure air jetted out at a very high flow rate enters the inner wall of the filter cartridge through the automatic rotating blowing assembly, causing the filter cartridge to expand sharply, causing shock and vibration, and causing the smoke and dust attached to the surface of the filter cartridge to be shaken off into the dust collecting drawer.

dust collector filter

♦ Drawer dust box, practical and convenient   The dust box adopts a drawerstructure. When there is a lot of dust accumulation, open the door, pull outthe dust box to clean up the dust, and then send the dust box in aftercompletion. Convenient, fast and practical.

♦ Industrial casters, non-slip and wear-resistantThemachine casters are made of top-grade polyurethane (PU), and the bracket ismade of 2.5mm pickling board to increase the reinforcement. The 3 inch casterscan carry 150kg each, and the tread is designed to enhance the anti-skidperformance.

dust collector

Appearance

laser dust collector

NO.

Name

NO.

Name

1

Power Indicator

9

Air outlet

2

Running lights

10

switch

3

Stop indicator

11

Power outlet

4

Differential pressure gauge

12

hinge

5

Stop switch

13

Inlet

6

Run switch

14

Plastic clasp

7

Emergency stop switch

15

Casters

8

Hasp

 

 

ModelPA-2500DMPA- 3500DMPA-4500DM
Maximum air volume2500 m³/h4000 m³/h5500 m³/h
Maximum negative pressure2500Pa3500Pa3800Pa
Input power3.0KW5.5KW7.5KW
Voltage frequencyThree-phase 380V, 50-60HZ
Filter typeH13 high efficiency filter cartridge

(1*325* 450mm)

H13 high efficiency filter cartridge

(2*325* 450mm)

H13 high efficiency filter cartridge

(3*325*660mm)

Filter area8 square meters16 square meters36 square meters
Filtration efficiency≥99.9 % @ 0.3 microns
Working noise≦ 75dBA≦ 78dBA≦ 80dBA
Machine size1450*850*1413mm1500*1000*1500mm2100*1000*1500mm
Machine net weight 200 kg250 kg350 kg

  Dongguan Pure-Air Co., Ltd. is the world's leading brand of safe/smart/efficient fume extraction system, specializes in the technical research, production, sales and service of Fume Extractor, Dust Collector, Explosion-proof Dust Collector, High vacuum cleaner and other air purification equipment.Pure-Air factory treat quality and brand as the life of the company, have established an ISO9001 quality.Our factory establish in year of 2011 in Dongguan, China, with Plant area of more than 5000 square meters. We are one innovator of the green industry. The company uses efficient indoor air purification technology and relies on high-quality professionals to focus on the purification of indoor air.Pure-Air fume extraction system and dust purification equipment is widely used in Laser Processing (Laser Cutting, Laser Engraving, Laser Marking / Coding, Laser welding, Laser cladding, laser welding etc.), Electronics and PCB Manufacturing (Soldering, Dipping, Reflow soldering, Wave Soldering, etc.), Machinery and Equipment Manufacturing (Welding, Cutting, Polishing, etc.), Lithium new energy,Inkjet Printing, 3D Printing, Food and Drug Production, Laboratory, Beauty and Medical Industries. We provide strong support for customers to improve work efficiency, clean production, energy saving and environmental protection, reduce the risk of occupational diseases, and create a clean indoor air environment for the production and operation of many domestic and foreign customers.Dongguan Pure-Air Co., Ltd. will continue to provide our customers with higher quality products and better services. Welcome to become our distributor!
Similar Product Recommend