Guided-Wave Radar Level Gauge (A+E 61L)
Measurement PrinciplesLow power, nano-second microwave pulses are guided down a probe submerged in the process media. When a microwave pulse reaches a media with a different dielectric constant, part of the energy is reflected back to the transmitter. The transmitter uses the residual wave of the first reflection for measuring the interface level. Part of the wave, which was not reflected at the upper product surface, continues until it is reflected at the lower product surface. The speed of this wave depends fully on the dielectric constant of the upper product. The time difference between the transmitted and the reflected pulse is converted into a distance, and the total level or interface level is then calculated. The reflection intensity depends on the dielectric constant of the product. The higher the dielectric constant value, the stronger the reflection is.
FeaturesUnlike older technologies, guided-wave radar (GWR) offers measurement readings that are independent of the chemical or physical properties of the process media with which it is in contact. Additionally, GWR performs equally well in liquids and solids.
GWR is suitable for a variety of level measurement applications including those that involve:
--Unstable process conditions—Changes in viscosity, density, or acidity do not affect accuracy.
--Agitated surfaces—Boiling surfaces, dust, foam, and vapor do not affect device performance. GWR also works with recirculating fluids, propeller mixers, and aeration tanks.
--High temperatures and pressures—GWR performs well in temperatures up to 220°C and can withstand pressures up to 60bar.
--Fine powders and sticky fluids—GWR works with vacuum tanks filled with used cooking oil as well as tanks holding paint, latex, animal fat, soybean oil, sawdust, carbon black, titanium tetrachloride, salt, and grain.
With the advantage of easy installation and low power consumption, the GWR level transmitter suits most liquid and solids level applications and liquid interface applications.
Model Selection
| Model | A+E 61L |
|
| Sensor | A | ¢6mm 35000mm length cable |
| B | ¢10mm 6000mm length probe |
| C | 6000mm length coaxial-dual probe |
| Explosion-proof | P | N/A, 4-20mA / HART |
| I | Exd II CT6, 4-20mA / HART |
| Process connection | 1 | G1-1/2A , PN40 S.S. |
| 2 | DN50, PN40C, DIN2501 S.S. |
| 3 | DN80, PN40C, DIN2501 S.S. |
| 4 | DN100, PN16C, DIN2501 S.S. |
| 5 | DN150, PN16C, DIN2501 S.S |
| Process temperature | 1 | Viton / -20 to 130 C (-4 to 266 F) |
| 2 | Kalrez / -40 to 150 C (-40 to 302 F) |
| 3 | Viton with cooling fin / -40 to 200 C (-40 to 392 F) |
| 4 | Kalrez with cooling fin / -40 to 220 C (-40 to 428 F) |
| Housing | A | Alumnium / IP68 |
| Cable connection | M | M20*1.5 |
| N | 1/2 NPT |
| Local display | Y | YES |
| N | N/A |
| Programmer | Y | YES |
| N | N/A |
| Special requirements | W | N/A |
| Y | specialized |
| Length | L |
|
Shanghai AEAD Technology Co., Ltd is a cooperation of Chinese and German technique which mainly performs in R&D, production, sales and service. The company adopts advanced international production line. Main products include A+E series products for exporting and A+D products for domestic sales in instruments and valves which could cater for the needs from domestic and foreign markets. Instruments include temperature, pressure, flow, level and master meters. Valves are consisted of brake valve, global valve, ball valve, butterfly valve, check valve, hydraulic control valve, plug valve, drain valve, reducing valve, strainer valve, regulating valve (electric, angle form, pneumatic, rotation and self-actuated types). AEAD Technology adheres to the development strategy of Internationalization, Technicalization, Industrialization, which can realize the high-end extension of the products from domestic market to international market. The value chain turns from providing single product to system solution, and the operation expands from linear-oriented to a comprehensive modern enterprise operation including merger and capital operation. The company is the first leading manufacturer located in China(Shanghai) Pilot Free Trade Zone in the field, and has already certified by CE / TC / CMC / API, ISO9001 Quality Management System, ISO14001 Environmental System and OHS Management System.