Membership
Help
Anyang Best Complete Machinery Engineering Co., Ltd
Anyang Best Complete Machinery Engineering Co., Ltd
This hammer milling machine is coarse grind equipment for biomass pellet line. It is designed for materials with high fiber or high water content and materials with low hardness. It has high productivity and low energy consumption. Below are the technical parameters and performance criteria of this wood hammer mill for sale.
| Model and specification | SFSPMX80×45 | SFSPMX80×60 | SFSPMX80×80 | SFSPMX80×100 | SFSP80-V | |
|---|---|---|---|---|---|---|
| Rotor diameter(mm) | 800 | 800 | 800 | 800 | 800 | |
| Width of crushing chamber (mm) | 450 | 600 | 800 | 1000 | 1200 | |
| Main shaft speed (rpm) | 2400 | 2400 | 2400 | 2400 | 2300 | |
| Hammer linear speed(m/s) | 100 | 100 | 100 | 100 | 96 | |
| Hammer quantity | 36 | 48 | 72 | 96 | 132 | |
| Equipped power(kw) | 18.5/22 | 30/45 | 45/75 | 75/90/110 | 160/200 | |
| Bearing model | NSK2216 | NSK 2216 | NSK 2317 | NSK 2317 | NSK 2317 | |
| Belt model | C2692*5 | C2692*5 | C2692*5 | C2692*5 | C2997*5 | |
| Ant vibration pad | 6 | |||||
| Size of sieve mesh | 445*1250 | 595*1250 | 795*1250 | 995*1250 | 795*1250 | |
| External size | Length (mm) | 2105 | 2105 | 2105 | 2305 | 2150 |
| Width (mm) | 980 | 1172 | 1372 | 1520 | 1930 | |
| Height (mm) | 1600 | 1600 | 1600 | 1600 | 1800 | |
| Air inflow rate (m3/min) | 74 | 91 | 110 | 141 | ||
| Model and specification | SFSPMX80×45 | SFSPMX80×60 | SFSPMX80×80 | SSFSPMX80×100 |
|---|---|---|---|---|
| Equipped power (kw) | 18.5~22 | 30~45 | 45~75 | 75~110 |
| Production output (t/h) | 1.5~2 | 2~3 | 3~4 | 5~7 |
Note: Demands need to be satisfied to meet the performance criteria mentioned before: The type of raw materials: water content should not over 14%; bulk density should not below 0.4 t/ m3. Sieve diameter of chipper is φ10mm; open porosity should not below 14%. 5cm is the advised size of raw material, and the output will reduced if the size of raw materials gets smaller. The small power configuration is used for materials with small bulk density and easy to grinded.
Hammer mill is also called wood grinder or shredder in some places. It is one of the key machinery for crushing system of biomass pellet making process. Below is the detailed information of the wood shredding/crushing machine.
Hammer mill and wood crusher are different. Actually, hammer mill is used for further crushing. After crushing, the diameter of wood materials is around 200mm; while after hammer milling, the diameter can be 3-5mm.

Equipment Base: It has the function of connecting and supporting other parts of grinder. Smashed powder should be discharged from the draft fan equipped on the side of or below the base.
Rotor: Rotor is composed of main shaft, hammer frame board, axis pin, hammers, bearing and other parts. It is the main moving element of the mill. The rotating speed of rotor is high; therefore, the assembly must proofed by the balance test before the axis pin and hammers are installed
This milling machine includes several main parts showing as the left image.
Working Principle of Hammer Mill: Raw materials are uniformly fed into the mill from the feed inlet. They are smashed under strike of the high speed rotating hummer and friction from the sieve plate. After the centrifugal force and air flow, raw materials will discharge from the outlet on the air conveyor base.