Membership
Help
ACE METER TECHNOLOGY CO.,LIMITED
ACE METER TECHNOLOGY CO.,LIMITED
Heating Jacket Target Plate Flow Meter
The Heating Jacket Target Plate Flow Meter for Bitumen is configured base on the inline type target plate flow meter ,the flow meter configured heating jacket which will keep the fluid warm and heated when it flows through the flow meter.the heating jacket could be driven by the steam or thermal oil.The heating jacket Target plate flow meter is normally used for the fluid which need to be heated to get the fluently flow such as bitumen,glue,resin,heavy oil etc. Now the heating jacket target plate flow meter is widely used in chemical and oil industry.


| Measure Medium | Oil,Chemical,Steam,Asphalt,Syrup |
| Nominal Diameter&Rated Pressure | Flange:DN15-DN300(1.6-10MPa) |
| Clamp:DN15-DN300(1.6-10MPa) | |
| Insert type:DN150-DN1500(1.6-10MPa) | |
| Screw:DN15-DN50(1.64MPa) | |
| Span | 1.0m³/h-30680m³/h |
| Rated Pressure | 2.5MPa |
| Accuracy Level | ±1%(Full Span) |
| Temperature of Medium | -40℃-+200℃ |
| Environment Temperature | -40℃-+85℃ |
| Power Supply | 24VDC or 3.6V lithium battery(Lifetime>3yrs) |
| Signal Output | 4-20mA |
| Sensor pipe material | SS304/SS316L |
| Ex-proof Level | ExiaIICT5/ExdIIBT6 |
| Wire Joint | 1/2NPT inner screw or M20*1.5 inner screw |
| LCD showing range | instantaneous flow:0-50000 |
| integrated flow:0- (restoration automatic) | |
| Shell Material | Cast Aluminum |
| Loaded Character | RLmax=50(votage-12)Ω@24V |
| Protection Level | IP65 |
Heating Jacket Target Plate Flow Meter Product characteristics:
A medium with high viscosity and sediment.
Accurate measurement, high accuracy, up to 0.2% (special order).
The pressure loss is small, only about 1 ≤ 2 P of the standard orifice plate, and the large caliber is obviously reduced.




Heating Jacket Target Plate Flow Meter