Welcome Customer !

Membership

XwbooElectronic ComponentsPiezoelectric Crystal, Frequency ElementTransducerHigh Power Ultrasonic Transducers with Two Parallel Stacks for Welding
  • $item.Title
  • $item.Title

High Power Ultrasonic Transducers with Two Parallel Stacks for Welding

Hangzhou Lanben Trade Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transducer
Place of Origin
ZheJiang, HangZhou
4200w High Power Ultrasonic Transducers with Two Parallel Stacks for large plastic welding machine.

High Power Ultrasonic Transducers with Two Parallel Stacks for Welding

Ultrasonic transducers are piezoelectric ceramics that resonate at ultrasonic frequencies and convert electrical signals into mechanical vibrations by the piezoelectric effect of the material. When the transducer is used as a transmitter, the electrical oscillating signal sent from the excitation source will cause a change in the electric or magnetic field in the electrical energy storage element of the transducer, which changes the mechanical vibration system of the transducer through some effect. A driving force is generated to cause it to vibrate, thereby propelling the medium in contact with the mechanical vibration system of the transducer to vibrate and radiate sound waves into the medium.

Clustered transducers

Clustered transducers can be used to drive a single ultrasonic stack. Compared to a single large diameter transducer, each of the smaller transducers has smaller diameter piezoceramics which potentially allows a more uniform piezoceramic prestress.

Because the piezoceramics have smaller diameters, the radial thermal conduction path for the piezoceramic heat will be smaller. Then the heat can be conducted more easily to the piezoceramic periphery so the piezoceramics should remain cooler for a given convective air flow.

In addition, smaller piezoceramics will allow greater peripheral area for convective air cooling. For example, consider a simplified transducer that uses a single Ø50 mm x 5 mm thick piezoceramic. (Here, any center piezoceramic bore is ignored.) The piezoceramic volume is 9818 mm3 and the peripheral area is 785 mm2. Now assume that this transducer with the single piezoceramic is replaced by two transducers that have the same total piezoceramic volume (again assuming only one piezoceramic for each transducer). With this stipulation, the required piezoceramic diameter is 35.4 mm and the resulting total peripheral piezoceramic area is 1112 mm2. In this example, using a dual transducer system increases the total peripheral piezoceramic area by 42% which may result in significantly improved cooling, thereby permitting higher power through-put.



 

ultrasonic transducer high power 

High Power Ultrasonic Transducers with Two Parallel Stacks for Welding 

Item

Parameter

Frequency

14.5~15.1Khz

Power

4200W

Impedance

14

Capatance

18000~22000pf


high power ultrasonic transducer

ultrasonic plastic welding transducer


Ultrasonic welding is used across variety of industries to join together thermoplastic materials. During ultrasonic welding, high frequency mechanical vibrations and compressive pressure are applied to the plastic materials. This creates intermolecular friction within the plastic which raises the temperature high enough to reach the melting point. During high volume production in manufacturing environments, the ultrasonic welding system component which fails most often is the transducer, which is responsible for creating the vibration. The transducer converts electrical energy into mechanical energy by means of a polarized piezoelectric PZT (lead zirconate titanate) polycrystalline ceramic material using high frequency voltage. The transducer is composed of round PZT disks attached to a titanium machined body by means of a central bolt. The bolt creates compressive pre-stress which prevents any tensile stresses within the brittle crystals during vibration and ensures perfect coupling between all components. The piezoelectric PZT crystals behave according to linear coupled electrical and mechanical equations. The transducer assembly is vibrated near the parallel resonant frequency to maximize efficiency and amplitude output.

Service and shipment 

l Warranty one year for transducer.

l You can contact us for technical inquiry any time.

l We supply OEM service for oversea customer, also will keep Confidentiality for our customers.

l We supply customized products service for small quantity also.

l Shipment by FED-EX /DHL

 

 




 


 换能器2

 

 


  Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the most suitable product for customers. So before each order, we will confirm all the details, including application details, capacity,equipment conditions, equipment specific information.Before year 2012, we only sale ultrasonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must be some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about ultrasonic systems, to use ultrasonic equipment better, to save cost when meet problem.The same to ultrasonic equipments, Unreasonable operation may shorter the use-life. So we have to make technical inquiry before operate ultrasonic machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment. Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have two OEM customer in USA and German.The high power ultrasonic system with different horn(probe) can work in different area, that why you can see different ultrasonic application , such like: ultrasonic welding , ultrasonic sewing , ultrasonic cutting , ultrasonic slicing, ultrasonic homogenizing and ultrasonic coating.The core components of ultrasonic system are always the ultrasonic generator and the Probe. The design of the vibrator probe and the stability of the ultrasonic generator have always been the most important factors in the ultrasonic application process. All the RPS-SONIC ultrasoic system will be tested 24 hours before shipment. and all the horn(probe) will design by ANASYS and resonance simulation, to confirm the perfect design.If you have any problem in ultrasonic area, welcome contact Rps-sonic.
Similar Product Recommend