Membership
Help
Shanghai Hufa Fluid Technology Co., Ltd.
Shanghai Hufa Fluid Technology Co., Ltd.
First, the pneumatic angle control valve overview
Second, the main components of pneumatic angle control valve material
| Body made of carbon steel | Body made of stainless steel | ||||||||
| 1 | Body | WCB | LCB | WC9 | 1 | Body | CF8 | CF8M | CF3M |
| 2 | Seat | 304 | 304 | 304 | 2 | Seat | 304 | 316 | 316L |
| 3 | Spool | 304 | 304 | 304 | 3 | Spool | 304 | 316 | 316L |
| 4 | Guide sleeve | 304 | 304 | 304 | 4 | Guide sleeve | 304 | 316 | 316L |
| 5 | cap | WCB | LCB | WC9 | 5 | cap | CF8 | CF8M | CF3M |
| 6 | Valve stem | 304 | 304 | 304 | 6 | Valve stem | 304 | 316 | 316L |
| 7 | filler | PTFE / flexible graphite | 7 | filler | PTFE / flexible graphite | ||||
| 8 | spring | 65Mn | 8 | spring | 65Mn | ||||
| 9 | Nut | 304 | 304 | 304 | 9 | Nut | 304 | 316 | 316L |
Third, the angle valve cover pneumatic form
Fourth, the main technical parameters pneumatic angle valve
| Nominal diameter DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| Rated flow coefficient KV | straight line | 6.9.6 | 11 | 17.6 | 27.5 | 44 | 69 | 100 | 176 | 275 | 440 | 690 |
| Equal percentage | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | |
| Actuator Model | Is the role | ZHA-22 | ZHA-23 | ZHA-34 | ZHA-45 | |||||||
| reaction | ZHB-22 | ZHB-23 | ZHB-34 | ZHB-45 | ||||||||
| Rated stroke L (mm) | 16 | 25 | 40 | 60 | ||||||||
| Diaphragm effective area Ae (cm2) | 280 | 400 | 600 | 1000 | ||||||||
| Nominal pressure PN (MPa) | 1.6 2.5 4.0 6.4 10.0 | |||||||||||
| Inherent flow characteristics | Straight line percentage | |||||||||||
| Inherent adjustable R | 50: 1 | |||||||||||
| Signal range Pr (KPa) | 20-60, 20-100, 40-200, 60-100, 80-240 | |||||||||||
| Air pressure Ps (MPa) | 0.14, 0.25, 0.28, 0.40 | |||||||||||
| Allow leakage | Ⅵ level | |||||||||||
| Operating temperature | Normal temperature type | -20 to 200, -40 to 250, -60 to 250 | ||||||||||
| Cooling type | -40 ~ 450, -60 ~ 450 | |||||||||||
| High temperature type | 450 ~ 560 | |||||||||||
| Low temperature type | -60 ~ -100, -100 ~ -200, -200 ~ -250 | |||||||||||
Fifth, pneumatic angle valve main performance parameters
| Serial number | project | Standard control valve | Cooling, low temperature control valve | ||||
| Without locator | With locator | Without locator | With locator | ||||
| 1 | Basic error <(%) | ± 5 | ± 1 | ± 15 | ± 4 | ||
| 2 | Back to the difference <(%) | 3 | 1 | 10 | 3 | ||
| 3 | Dead zone <(%) | 3 | 0.4 | 8 | 1 | ||
| 4 | Always point deviation <(%) | Open air | Start point | ± 2.5 | ± 1 | ± 6 | ± 2.5 |
| end | ± 5 | ± 15 | |||||
| Qi off | Start point | ± 5 | ± 15 | ||||
| end | ± 2.5 | ± 6 | |||||
| 5 | ± 2.5 | +2.5 | +6 | +2.5 | |||
Six, pneumatic angle control valve dimensions
| DN | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| L | PN16 / 25 | 95 | 100 | 105 | 115 | 125 | 145 | 155 | 175 | 200 | 225 | 275 |
| PN40 | 95 | 100 | 105 | 115 | 125 | 145 | 155 | 175 | 200 | 225 | 275 | |
| PN64,100 | 115 | 115 | 130 | 130 | 150 | 170 | 190 | 215 | 250 | 275 | 325 | |
| H | 349 | 350 | 358 | 378 | 393 | 494 | 503 | 521 | 634 | 696 | 715 | |
| H1 | 444 | 445 | 458 | 478 | 492 | 594 | 628 | 646 | 759 | 846 | 915 | |
| H2 | 419 | 423 | 445 | 478 | 490 | 582 | 624 | 620 | 759 | 840 | 905 | |
| H3 | 180 | 180 | 180 | 180 | 180 | 236 | 236 | 236 | 310 | 310 | 310 | |
| A | 282 | 282 | 282 | 282 | 282 | 360 | 360 | 360 | 470 | 470 | 470 | |
| C | 220 | 220 | 220 | 220 | 220 | 270 | 270 | 270 | 320 | 320 | 320 | |
| L1 | 289 | 289 | 289 | 289 | 289 | 347 | 347 | 347 | 476 | 476 | 476 | |
| Pressure Level | GB: 1.6, 2.5, 4.0, 6.4, 10.0 MPa ANSI: 150, 300, 600 LB JIS: 10, 20, 30, 40K | |||||||||||
| Execution agency | ZHB-22 | ZHB-23 | ZHB-34 | ZHB-45 | ||||||||