Welcome Customer !

Membership

XwbooPackaging MachineryFinished Packaging MachineryFilling MachineHigh Speed Press Roller feeder
  • $item.Title
  • $item.Title

High Speed Press Roller feeder

Dongguan Samhoor Precision Machinery Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Filling Machine
Place of Origin
,

Dongguan Samhoor Precision Machinery Co., Ltd.

Contact

Phone

+8618207623286,+8613650059727,+8615024188865

Fax

+86-769-81517489
High Speed Press Roller feederRoller Feeder Advantages:* Productivity: can be multi-engineering continuous processing* High speed: up to 600 times per minute* Versatility: Regardless of the width and

High Speed Press Roller feeder
High Speed Press Roller feeder Specifications table

Roller Feeder Advantages:
* Productivity: can be multi-engineering continuous processing
* High speed: up to 600 times per minute
* Versatility: Regardless of the width and thickness of the material, simply adjust the feeder to match the mold can be used.
* Simple structure, economical and practical, low failure rate, easy maintenance.
Feeding accuracy:
* Depending on the number of revolutions and the length of the feed, the accuracy is 0.05mm. If the guide tip for positioning, the more ± 0.01mm accuracy.
Type:
* Single type: apply to the coil (thickness 0.15mm or more), single or continuous punching products used.
* Duplex: suitable for the coil (thickness 0.15mm below), short foot material, single product or continuous punching products used.
The four major features of the structure:
1, one-way bearing
1.1, embedded with superhard alloy, and with roller bearings, with wear resistance, stability, high precision, long life.
1.2, gear after heat treatment HRC60o and then precision grinding, high precision transmission.
2, wheel
2.1, the use of hollow, light weight, rotation inertia is small, can immediately stop to ensure that feeding accuracy.
2.2, heat treatment HRC60o chrome and then grinding, high hardness, excellent wear resistance, long life.
3, disc brakes (general brake device)
3.1 using advanced clutch to make the rain surface completely contact, long life, good stability, high precision.
4, reverse device
4.1, construction and one-way device, can be quite precise control of the next round, long time will not make the next round of the slightest retrogression, stability and accuracy is quite high.
4.2, not because of the splashing of the residual oil, leaving the brake lost recorded the next round of reverse, the distance is not allowed to pass the phenomenon.
4.3, not easy to produce high fever.
4.4, with a hard alloy and roller, easy to wear.
4.5, the action for the roller for circular motion, rather than as a guide pillar 4 linear movement, so there will be no bite the phenomenon.
4.6, the friction is small, the required transmission torque is relatively reduced, the transmission mechanism is less likely to damage.
4.7, if the reverse device equipped with the speed of up to 30 m / min, usually 20 m / min, an increase of 50% efficiency.
4.8, special structure, increased service life.

Note: Each model, the general brake device are equipped with standard parts.
If the machine has another reverse device, the general brake device for the auxiliary, that is, double brake system.

High Speed Press Roller feeder various parts of the name

Hey, friends. Welcome to browse Dongguan Samhoor Precision Machinery Co.,Ltd to learn more about our High Speed Punch Machine's infomations, it's our pleasure. The Chinese name is 东莞市三好精密机械有限公司, "Samhoor 三好" here means good quality, good price, and good service of three advantages. Samhoor company was founded in 2007, and it's located in Humen Town, Dongguan City, an important manufacturing area in Guangdong Province. It is a manufacturing enterprise integrating production, sales and after-sales service. Our company has professional experience of precision metal high-speed stamping industry for more than 10 years. We mainly produce 25 tons -80 tons of C-type high-speed presses and 30 T-200T gantry H-type punch, and have a full range of high-speed press solutions, which can greatly help customers improve stamping production efficiency and reduce costs. We warmly welcome customers from all over the world to visit our factory. We can make a preferential quote of high-speed punch machine, also we can greatly provide you the support of stamping technical and after-sales service. Samhoor's High Speed Stamping machine was created by a team of senior engineers from Taiwan, which not only have the stability and accuracy of Japanese and German presses, but also incorporate the unique favorable price features of China, that makes a cost-effective high-speed punch. Our factory production address is in No. 10, Dakeng Road, Juqi Community,Humen Town, Dongguan City, Guangdong Province, China. We covers an area of 20,000 square meters, and have nearly 100 production staff, which take the lead in the precision machinery industry in Dongguan. We warmly hope you can visit in person for all this, and we will be dedicated to every customer service.
Similar Product Recommend