Membership
Help
Shanghai JSN Micro Flow Meter CO.,LTD
Shanghai JSN Micro Flow Meter CO.,LTD
The gear metering pump is a pair of gears that mesh with each other, one of which is the driving gear, and the other is the passive gear, which is driven by the driving gear to rotate. There is a small gap in the housing. When the gear rotates, the enclosed volume between the teeth increases in the suction chamber where the gear teeth gradually disengage, forming a partial vacuum. The liquid is sucked into the suction chamber under the effect of pressure difference. As the gear rotates, the liquid is pushed forward by the gear between the gear and the housing in two ways, and is sent to the liquid discharge chamber. In the liquid discharge chamber, the two gears are gradually meshed, the volume is reduced, and the liquid between the gears is squeezed to the liquid discharge port. Each time the gear rotates one time, the volume of the discharged liquid is constant. By measuring the rotation speed of the gear metering pump, the flow rate of the gear metering pump is obtained.

Speed: 100~1000r/min
Main materials: 304SS, 316SS, 316LSS, 2205, 440
Gear structure: gear and shaft are integrated
Seal: fluorine rubber seal + fluorine rubber O-ring +440 bearing, porcelain bearing, PEEK bushing, (low temperature and low pressure, high temperature and high pressure 25bar)
Working pressure: 0-2.5MPa
Medium viscosity: ≤ 20,000 CP
Maximum temperature: Common temperature: ≤100℃, maximum temperature 315℃
Pump body accuracy: ±0.5%
Available electrodes: servo motor, frequency conversion motor, stepper motor, brushless
Advantages: Suitable for measuring water, suitable for measuring acid and alkaline media, belonging to light load and high speed, the viscosity can not be higher than 20000CP, the maximum speed can reach 1000 rpm, the speed can be increased from 100 to 1000 rpm.
Application industry
Cement grinding aid, papermaking auxiliary, defoamer, emulsifier, water glass, flame retardant, catalyst, hydrogen peroxide, traditional Chinese medicine extract, textile dye, chemical auxiliary, surfactant, oxidant, scale inhibitor, hard fat Acid, triethanolamine, yeast, lactic acid, curing agent, acidic solution, alkaline solution, coater adhesive, brine, desulfurizer, pulp, film, tape, aluminum-platinum laminating machine, glue, glue, food filling , transport, metering, measuring most fluid media in the range of 0-14PH, etc...
Technical data sheet

Model | FlowL/H | Inlet | Pump size L(mm) | Pump Size B(mm) | Pump size C(mm) | KW、REV r/min | Pressure MPa | Material |
HS-5 | 120 | G1/2 | 191.60 | 43.25 | 46.25 | 0.55、910 | 0.6 | 304 316 316L 2205 |
0.75、925 | 1.0 | |||||||
1.1、930 | 1.6 | |||||||
HS-8 | 210 | G1/2 | 195.60 | 43.25 | 52.25 | 0.55、910 | 0.6 | |
0.75、925 | 1.0 | |||||||
1.1、930 | 1.6 | |||||||
HS-15 | 300 | G1/2 | 199.60 | 43.25 | 54.25 | 0.55、910 | 0.6 | |
0.75、925 | 1.0 | |||||||
1.1、930 | 1.6 | |||||||
HS-20 | 420 | G1/2 | 207.60 | 43.25 | 62.25 | 0.55、910 | 0.6 | |
0.75、925 | 1.0 | |||||||
1.1、930 | 1.6 | |||||||
HS-30-1 | 540 | G1/2 | 212.60 | 43.25 | 67.25 | 0.55、910 | 0.6 | |
0.75、925 | 1.0 | |||||||
1.1、930 | 1.6 | |||||||
HS-30-2 | 600 | G3/4 | 217.10 | 79.50 | 35.50 | 0.75、925 | 1.0 | |
1.1、930 | 1.6 | |||||||
HS-30-L | 900 | G3/4 | 232.10 | 87 | 43 | 0.75、925 | 1.0 | |
1.1、930 | 1.6 | |||||||
HS-40 | 1200 | G3/4 | / | / | / | 1.1、930 | 1.0 | |
1.5、940 | 1.6 |
The measurement data is carried out under normal pressure, and the viscosity of the medium does not exceed 200cps, which exceeds the selection range and needs to be customized separately.
阀门:valve;过滤器:filter;计量泵:Metering pumps;压出管:Press out the tube;
液料换向阀:Liquid material directional valve;回流:Reflow;输送终端:Conveying terminal
液面:Minimum liquid level)
Product specifications:
CX-HS High-speed gear meter pump user manual .pdf