Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesHigh Voltage Disconnector for Lightning Arrester
  • $item.Title
  • $item.Title

High Voltage Disconnector for Lightning Arrester

Haivo Electrical Co.,Ltd

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
ZheJiang, WenZhou
As a special accessory of the surge arrester, the disconnector is used in series connection with the surge arrester.The purpose is to use the power frequency short-circuit current to make the disconnector act when the surge arrester fails abnormally, so that the grounding termination of the disconnector is automatically disconnected, and the arrester is out of operation to prevent further expansion of the accident,and gives the visibility of the faulty surge arrester, which is convenient for maintenance personnel a......

    The new type of disconnector produced by our company has the characteristics of fast action and the ability to withstand the specified current impact and action load. All technical parameters meet the requirements of the standard IEC 60099-4:2014 Surge arresters –Part 4: Metal-oxide surge arresters without gaps for a.c. systems standards.


Outstanding advantages:

1. Wide operating current range

It can be disconnected not only under large power frequency fault current (>50A), but also under small fault current (50mA).

2. The speed of disconnection is fast

It can be matched with the reclosing function of the circuit breaker, not only for various voltage levels and various types of surge arresters, but also for different grounding systems (neutral grounding and ungrounding systems).

3. High performance of impulse withstand

No action under 2ms square wave and 4/10μs high current impact.

4. High mechanical strength and good sealing performance 

It can be used with lightning arresters below 36KV, and can also be used with lightning arresters of 36~220KV.

5. Easy to install and replace

The threaded external interface is reliable and convenient to connect with the surge arrester in series connection, and the replacement is extremely convenient.


Time versus current characteristics

图片1

Current(A)

0.05 0.5 2 20 200 800

Time(S)

300

-

400

50

-

70

4

-

6

0.4

-

0.5

0.03

-

0.04

0.008

-

0.015


Impulse current withstand performance

Model

TLB-400

TLB-800

Remark

2mS Long duration current impulse withstand(A)

400 800

no action

4/10μS High current impulse withstand(kV)

100 100

Method of installation

Surge arresters with voltage levels below 36KV are installed with insulating brackets. The surge arrester is fixed with insulating bracket, and the disconnector is installed on the lower terminal of the surge arrester. The grounding wire is made of braided soft copper wire with a length of about 3000mm to ensure that the surge arrester body has enough insulation distance after separation.


  Haivo Electrical Co.,Ltd, is a provider of power equipment and services for the global electric utility industry. It mainly manufacture power transmission & distribution equipments FROM 10Kv to 220kv, covering many product series as Fuse cutout, Surge arrester, Composite & Porcelain insulator, Disconnector switch & Load Break Switch , Hardware fitting for overhead line, SEPARATABLE CONNECTORS and Cable joint & TERMINATION kits (cold & heat shrinkable cable accessories).
Similar Product Recommend