Membership
Help
南京宏沐科技有限公司
南京宏沐科技有限公司
☆ High ratio of performance to costs
☆ Designed with silicon sensitive elements imported from Germany, with excellent corrosion -, impact -, overloading -, vibration -, and wear–performance.
☆ Wide range of operating temperature, high overall measuring accuracy, and good long–term stability
☆ Normalized design and production ensures product progressiveness, practical use, and quality stability
☆ Wide range of scale: From vacuum to 100MPa and designed with positive and negative gauge pressure range
☆ Internal combustion engine
☆ Air–conditioner and chilling equipment
☆ Testing bench
☆ Hydraulic and pneumatic system
☆ Engineering machinery
☆ Energy and water treatment system
☆ Agricultural mechanical equipment
☆ Locomotive braking system
☆ Medical equipment
☆ Pump and compressor
☆ Equipment automation
Technical Data | ||
Measuring range | -100kPa ~ 0 ~ 5KPa … 100MPa | |
Overloading capacity | Two times of FS pressure (where over pressure for 100MPa is designed with 1.1 times of FS pressure) | |
Pressure type | Gauge pressure or absolute pressure | |
Medium to be measured | The gas or liquid compatible with 316 stainless steel | |
Overall accuracy | ± 0.25% FS | ± 0.4% FS |
Long-term stability | Typical: ± 0.1% FS | Maximum: ± 0.2% FS |
Zero point temperature drifting | Typical: ± 0.2% FS | Maximum: ± 0.05% FS / ℃ |
Sensitivity temperature drifting | Typical: ± 0.2% FS | Maximum: ± 0.05% FS / ℃ |
Operating temperature | -40 ~ +85 ℃ | |
Compensating temperature | -10 ~ +60 ℃ | |
Range of power supplying | 12 ~ 36V DC (24V DC generally) | |
Signal output | 4 ~ 20mA / 1 ~ 5V DC / 0 ~ 5V DC / 0.5 ~ 4.5V DC | |
Load resistance | ≤ (U-12) / 0.02Ω | |
Enclosure protection degree | IP 67 (Cable Type) IP 65 (Socket Type) | |
Safe explosion - proof | Ex ia II CT5 | |
Weight | Approx. 0.5kg | |
Vibrating tolerance | ≤ ± 0.01% FS ( Axles X, Y , Z, 200Hz / g ) | |
Response time | ≤2 ms | |
Dielectric strength / RF degree | EN 50081–1; EN 50082–1; IEC 61000–4–3 | |
Pressure connection | See product selection table and process connecting drawing (may be defined by the customer). | |
Electrical wiring connection | See product selection table and process connecting drawing (may be defined by the customer). | |
Port and Enclosure | Stainless steel 1Cr18Ni9Ti | |
O-ring | Fluorubber | |
Sensor Membrane | Stainless steel 316L | |
Resolution | Infinite small (theoretical) 1 / 100000 (general) | |
HM20 | General - type pressure transducer |
| Guideline of Selection | High - accuracy Pressure Sensor | |||||||||
| Pressure type | Gauge pressure (G, may not be indicated); Absolute pressure (A) |
| ||||||||||
| Range | (0 ~ X kPa or 0 ~ X MPa) |
| ||||||||||
|
|
| Code | Overall accuracy (linear + repeatability + lagging) |
| ||||||||
|
|
| 1 | ± 0.4% FS |
| ||||||||
|
|
| 2 | ± 0.25% FS |
| ||||||||
|
|
|
|
| Code | Signal output |
| ||||||
|
|
|
|
| A1 | 4 ~ 20mA |
| ||||||
|
|
|
|
| V1 | 1 ~ 5V DC |
| ||||||
|
|
|
|
| V2 | 0 ~ 5V DC |
| ||||||
|
|
|
|
| V3 | 0.5 ~ 4.5V DC |
| ||||||
|
|
|
|
|
|
| Code | Additional functions |
| ||||
|
|
|
|
|
|
| F1 | M20 x 1.5 external thread |
| ||||
|
|
|
|
|
|
| F2 | G 1 / 4 external thread |
| ||||
|
|
|
|
|
|
| F3 | 1 / 4 NPT external thread |
| ||||
|
|
|
|
|
|
| F4 | 1 / 2 - 20 UNF - 2A |
| ||||
|
|
|
|
|
|
| F0 | Special |
| ||||
|
|
|
|
|
|
| W1 | Cable type (See Outline Profile Drawing I) |
| ||||
|
|
|
|
|
|
| W2 | Socket type (See Outline Profile Drawing II) |
| ||||
|
|
|
|
|
|
| L1 | 3 1 / 2 LCD display |
| ||||
|
|
|
|
|
|
| L2 | 3 1 / 2 LED display |
| ||||
|
|
|
|
|
|
| P | Flushed membrane type |
| ||||
|
|
|
|
|
|
| E | Intrinsically safe explosion - proof type |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
HM20 ( 0 ~ 100 | kPa) | — 1 | — A1 | — F1 | — L2 General-type pressure transducer |
|
|
| |||||
Tips of Selection: