Membership
Help
南京宏沐科技有限公司
南京宏沐科技有限公司
☆ Designed with tantalum membrane pressure resistant type chip, with very strong corrosive resistance
☆ Impact – and vibration – proof, wear resistance
☆ High accuracy: 0.25% FS 0.4% FS
☆ Good stability: ≤0.2% FS / year, ≤0.2% FS / ℃
☆ Without production process pollution; without force transmission filling liquid
☆ The enclosure may be made of PVC, titanium alloy or PTFE, depending on the customer’s corrosion of medium.
Technical Data |
| |||
Measuring range | - 100KPa ~ 0 ~ 5KPa … 100KPa … 90MPa |
| ||
Overloading capacity | Two times of FS pressure |
| ||
Type of pressure | Gauge pressure or absolute pressure |
| ||
Medium to be measured | Strong and weak corrosive gas or liquid |
| ||
Overall accuracy | Typical: ± 0.25% FS | Maximum: ± 0.4% FS |
| |
Medium temperature | -20 ~ +85 ℃ |
| ||
Long – term stability | Typical: ± 0.1% FS / year | Maximum: ± 0.2% FS / year |
| |
Zero point temperature drifting | Typical: ± 0.015% FS | Maximum: ± 0.03% FS / ℃ | ||
Sensitivity temperature drifting | Typical: ± 0.015% FS | Maximum: ± 0.03% FS / ℃ | ||
Response time | ≤1 ms |
| ||
Resolution | Infinite small (theoretical) 1 / 100000 (general) |
| ||
Medium temperature | -20 ~ +85 ℃ |
| ||
Compensating temperature | -10 ~ +60 ℃ |
| ||
Ambient temperature | -20 ~ +80 ℃ |
| ||
Service life | ≥1 x 108 pressurized cycle (25℃) |
| ||
Material of membrane | Tantalum membrane |
| ||
Material of enclosure | PVC, titanium alloy, PTFE |
| ||
Load resistance | ≤ (U-12) / 0.02Ω |
| ||
Protection degree | IP 65 – IEC 60529 for plug type; IP 67 – IEC 60529 for cable type |
| ||
Intrinsically safe explosion - proof | Ex ia II CT5 |
| ||
Weight | Approx. 250g |
| ||
HM50 | Anti - corrosive Pressure Transducer |
| Guideline of Selection | Anti - corrosive Pressure Transducer | ||||||||||
| Code | Type of pressure | ||||||||||||
| G | Gauge pressure ( may not be indicated) | ||||||||||||
| A | Absolute pressure | ||||||||||||
|
| Range | Measuring Range | |||||||||||
|
| 0 ~ X KPa or MPa | ||||||||||||
|
|
|
|
| Code | Overall accuracy (linear + repeatability + lagging) | ||||||||
|
|
|
|
| 1 | ± 0.4% FS | ||||||||
|
|
|
|
| 2 | ± 0.25% FS | ||||||||
|
|
|
|
|
|
| Code | Signal Output | ||||||
|
|
|
|
|
|
| A1 | 4 ~ 20mA | ||||||
|
|
|
|
|
|
| V1 | 1 ~ 5V DC | ||||||
|
|
|
|
|
|
| V2 | 0 ~ 5V DC | ||||||
|
|
|
|
|
|
| V3 | 0.5 ~ 4.5V DC | ||||||
|
|
|
|
|
|
|
|
| Code | Additional functions | ||||
|
|
|
|
|
|
|
|
| F1 | M20 x 1.5 external thread | ||||
|
|
|
|
|
|
|
|
| F2 | G 1 / 4 external thread | ||||
|
|
|
|
|
|
|
|
| F0 | Special | ||||
|
|
|
|
|
|
|
|
| W1 | Cable type (IP67, 2m) | ||||
|
|
|
|
|
|
|
|
| W2 | Socket type (IP65, DIN 43650) | ||||
|
|
|
|
|
|
|
|
| E | Intrinsically safe explosion - proof type Ex ia II CT5 | ||||
|
|
|
|
|
|
|
|
|
|
|
| |||
HM50 ( 0 ~ 1.6KPa) |
| — 1 | — A1 | — F1 | — W2 Anti - corrosive Pressure Transducer | |||||||||
Tips of Selection