Welcome Customer !

Membership

XwbooMining & Metallurgical EquipmentSupport EquipmentHydraulic Control ValveHS11X-16T Wire Mouth Backflow Preventer
  • $item.Title
  • $item.Title

HS11X-16T Wire Mouth Backflow Preventer

SHANGHAI BAIGANG VALVE GROUP CO., LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Hydraulic Control Valve
Place of Origin
ShangHai, ShangHai
HS11X-16T Wire Mouth Backflow PreventerProduct overviewProduct model: HS11X-16TNominal diameter: DN40~100mmNominal pressure: PN1.0~1.6MPaApplicable temperature: 0~80℃ (up to 200℃ if necessary)Flange standard: GB/T17241.6, GB/T9113Test standard: GB/T 13927, API598

HS11X-16T Wire Mouth Backflow Preventer product description:
HS11X-16T silk mouth backflow preventer is to repair the pipeline and power, the tap water is often interrupted, once the power supply is restored, tap water becomes yellow and dirty, it is due to the process of water, from the fire pipe , Unoccupied buildings or water pipes have not yet used the branch of the backwater, rust water back. In order to allow residents to drink clean water, backflow preventer this device can effectively prevent the occurrence of dirty water in the above circumstances, not only ensure the safety of residents drinking water, but also save water resources. According to the introduction of China Building Standard Design Institute, the Ministry of Construction has revised the relevant national standards and installed "backflow preventer" on the building water supply pipelines.  


HS11X-16T Wire Mouth Backflow Preventere product structure:
Backflow prevention device is composed of two levels of back-stop system and a drainage pressure relief system. The drainage pressure relief system upper chamber is connected with the inlet end of the first-stage check-back system. 
The first and second-level check-back system is mainly composed of the valve body, inlet joint, disc, gaskets, springs and so on. 
Drainage pressure relief system is mainly composed of valve cover, diaphragm, valve core, gaskets, drain, spring, air baffle, etc. The outlet of air baffle must be connected to the drainage pipe network or sewer.


HS11X-16T Wire Mouth Backflow Preventer working principle:
Backflow prevention device is added in the secondary checkback system, a drainage pressure relief device, so that even if the secondary check seal at the same time damage, it can also play a role in preventing backflow pollution. Its working principle: 
1. Normal water supply: 
a. Clean municipal water from the first-class check-back system through the drain to the second-level check-back system to export water to users, the first-level check-in system to import high-pressure water into the drainage diaphragm Cavity, and the diaphragm under the cavity and the first stage check valve outlet (second stage check valve inlet) communicating, due to its existence of a certain pressure difference ΔP1 = 0.035MPa, pushing the valve flap down, drain closed, backflow preventer Normal water supply; 
b. When the valve after the pipeline without users, water still. Such as the inlet pressure remains unchanged, there is pressure before and after the drain is still closed, such as the inlet pressure drops, the intermediate chamber and the valve differential pressure ΔP1 ≤ 0.022MPa, then the drainage control spring to open the spool, open the drain Allow the middle chamber to drain, keeping ΔP1 at 0.035 MPa. 
 
2. seal failure: 
a. Backflow preventer after the pipe network pressure rises above the valve inlet pressure, such as the second check valve seal intact, high-pressure water will not backflow, the diaphragm up and down to maintain the original pressure Poor, drain closed, no pressure relief. When the second check valve seal leak damage, the second check valve before the pressure increases, resulting in lower diaphragm pressure drop across the drain, drain open, drain pressure relief; this time, such as the first stop Check valve seal damage at the same time, as the second-stage check valve back to the high-pressure water has been decompression, it will not back to the first-class check valve. 
b. When the valve pressure is higher than the pressure before the valve, such as water pressure continues to decline, the pressure on the diaphragm diaphragm pressure drop, the safety control valve to open the drainage spring drainage regulator drainage. When the inlet pressure drops to zero or negative pressure, the drain opens completely, the water is drained and the air enters the vacuum chamber through the drain to prevent siphon backflow.
 
3. The valve opening pressure ≤ 0.07MPa, the specification provides in the range of 0.06 ~ 0.1MPa, inlet check valve working pressure is 0.035MPa. 
 
HS11X-16T Wire Mouth Backflow Preventer main shape and installation size:

Specification DN (mm)

Total length

Inlet and outlet pipe diameter (in)

Drainage pipe diameter (in)

Weight (kg)

DN15

169

1/2

1/2

1.2

DN20

172

3/4

1/2

1.4

DN25

236

1

1/2

3.5

DN32

321

11/4

3/4

7

DN40

321

11/2

3/4

7

DN50

321

2

1

10



  Shanghai Baigang Valve Group Co, Ltd. The original Shanghai Baigang Valve Machinery Factory was founded in 1998, is a valve manufacturer with more than 20 years of high-end valvetechnology in Shanghai, after years of construction and accumulation of development, restructuring Rongsheng Group Co, Ltd. Group registered capital of 61 .88 millin yuan, the groupheadquarters is located in Shanghai Jinshan District, Shanghai valve brand, one of China's valve brands, is a collection of scientific research, casting/forging, production, sales and service in oneof the modern professional valve manufacturing enterprises.Shanghai Baigang Valve Group Co., Ltd.(abbreviation: Baigang Valve Group)Main business valve brands: Baigang brand BAIGANG, SHBG, BGVG, currently the group has five subsidiary valve andactuator brands, under the control of more than 10 professional companies and more than 30 strategic agreement partner companies, forming a dedicated professional product supplychain;Group headquarters factory is located in industrial park, the main production and industrial automation control valve valve, etc, in order to develop the best steel group, realize powerstel brand valves intelligent manufacturing towards the world, owns autonomous system, strict control of product quality management system and the three major production bases located inzhejiang corrosion resistant material and metal steel valve base, the base for tianjin rubber valve, hydraulic valve in fujian province, to scientific research and technology innovation as the core,the manufacturing system of quality control system as the center.The company adhere to the quality first, honesty, open up the market as the business philosophy to create a strong Baigangvalve group and national brand;Baigang high quality valves, automatic control equipment and accessories, mechanical equipment and other products are mainly used in chemical industry,natural gas, petroleum, power station, metallurgy, water conservancy engineering, environmental protection, water treatment, pharmaceutical and other fields.Since its establishment, the company has been adhering to the people-oriented, harmonious and win-win management philosophy, advocating humanized management, creating a good spacefor the development of all kinds of talent, talent is the foundation of the development of the company.The company and the major production bases have all kinds of mechanical processingequipment and perfect physical and chemical testing and performance testing equipment as well as rigorous management mode, to ensure that we can eficiently produce high-quality high-endvalves and automation control equipment and mechanical equipment products.
Similar Product Recommend