Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesHZDL-30000A Primary Current lnjection Tester Primary Current Injection Test System Automatic Prim...
  • $item.Title
  • $item.Title

HZDL-30000A Primary Current lnjection Tester Primary Current Injection Test System Automatic Prim...

Huazheng Electric Manufacturing (Baoding) Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HeBei, BaoDing
HZDL-30000A Primary Current lnjection Tester Primary Current Injection Test System Automatic Primary Current Injection Test Device

I.Overview

HZDL-30000A high current generator (referred to as current booster) The high current generator here is a test equipment developed by our company. It integrates the advantages of similar products at home and abroad, adopts numerical control technology, has strong anti-interference ability, and Compared with the previous generation of current boosters, due to the use of low power consumption, large capacity self-coupling voltage regulators and high magnetic permeability iron cores, the converters have the advantages of large output power, small size and light weight. Mainly used for thermal relay, motor protector, contactor, circuit breaker, air switch, switchgear, circuit breaker, protection screen calibration; used for primary busbar protection and the transformation ratio of various current transformers, etc. It is widely used in scientific research, production and electrical test sites of electric power, railway, petrochemical, metallurgy and mining enterprises.

II.Main functions

It can output 0~30000A current for a long time

The action time of the test equipment can be synchronized

Automatic identification of normally open and normally closed contacts

Several calibrations can be connected in series at the same time to improve work efficiency

III.Performance characteristics

Using beautiful and elegant PVC panel

Display the test value of primary current and secondary current directly, which is convenient for test observation and record.

High measurement accuracy 0.5 class

High power, small size and strong load capacity

Small size and light weight, the volume is only 30% to 70% of similar products, and it is very convenient to carry.

IV.Operation

(1)After the wiring is completed, check it again to see if there is any wiring error and whether the connectors are in good contact.

(2)During the test, if there is any abnormal phenomenon such as ignition and no display when starting up, immediately turn off the power and recheck the wiring.

(3)During the actual wiring, the current output terminal should form a loop, otherwise the instrument will not output current.

(4)The current riser has random output wires; the output external copper wires are selected according to 10A/mm2. (The standard configuration is two 1-meter test leads)

(5)The capacity of the equipment is designed for short-time work of 5 minutes.

V. Technical characteristics

1.Name and Classification

(1)Name: 30000A high current generator.

(2)Environmental category: It belongs to the Group III instruments in GB6587.1-86 "General Outline of Environmental Testing of Electronic Measuring Instruments" (can be used in outdoor environment).

(3)Input AC 50Hz, 380V.

(4)Output single-phase 0-30000A DC high current; the current can be adjusted smoothly and continuously, and the accuracy is higher than 0.5;

The output current is a standard sine wave with tiny burrs, which is better than thepower system requirement index standard, and the ripple coefficient is less than 0.3%.

(5)Output current mode: the true RMS value is continuously adjustable;

(6)Output waveform: standard sine wave;

(7)Output opening voltage: 6V.

(8)Current accuracy: each current can be adjusted smoothly and continuously, and the accuracy is higher than 0.5. The current and voltmeter display is a true effective value, with high accuracy and high stability;

(9)Current stability: 0.2%;

(10)Current waveform distortion: THD 1%;

(11)Protection settings: overcurrent, overvoltage;

(12)The current action time of the tested element can be measured, and the locking action time can be recorded synchronously. Normally open and normally closed contacts are automatically discriminated.

(13)Time measurement range: 0.0 01S---9999.999S, accuracy: 0.001S

(14)Power: 180KVA


  Baoding Huazheng Electric Manufacturing Co., Ltd. is a group company,was established in 2008 March, referred to as "Huazheng electric", headquartered in the national historical and cultural city, one of the Beijing Tianjin Hebei regional center city, "South Gate of the capital "——Baoding,our company has 4 subsidiaries,it's the export of electrical testing equipment, State Grid suppliers , the Alibaba was certified as the north base of dream.The company is mainly engaged in the operation of the electronic testing instruments and other products, mainly serving the power system, electrified railway, shipbuilding industry, telecommunications, municipal administration and other large enterprises. Our business covers six major regions: North China, East China, central China, Northeast China, Southwest China and Northwest China, and will set up branches and offices in Beijing, Tianjin, Shanghai and overseas. The product has been successfully applied to power infrastructures such as Africa, Europe and America, and has established good cooperative relations with overseas customers such as Korea, Japan, Great Britain, South Africa and Kenya.WHY CHOOSE HUAZHENG?Huazheng , established in 2008 , is a enterprise which is engaged in the research, development, sale and service of transformer tester,transformer oil tester,relay tester,high voltage tester,circuit breaker tester . We are located in Baoding ,China, which is close to Beijing with convenient transportation access. Our experienced staff are always available to discuss with you for your requirements and ensure full customer satisfaction. In addition, we have obtained I S O and C E certificates. And developed impeccable inspection organization to make sure all of our products quality comply with international standards(like I E C/ A S T M /E N).In China, Huazheng is the supplier of The State Grid, the government purchases many products from our company each year. From 2012 , our products have been exported to clients in such countries and regions as USA, Brazil, Chile, Vietnam, Indonesia, Korea, Turkey, Dubai, South Africa . We also cooperate with some enterprise in the world ,such as Ausgrid , GE. Now we are trying to set up the oversea agent to support the after sales service.
Similar Product Recommend