Welcome Customer !

Membership

XwbooElectronic & New Energy EquipmentSubstation EquipmentCurrent TransformerIndoor Single Phase Current Transformer
  • $item.Title
  • $item.Title

Indoor Single Phase Current Transformer

Zhejiang Volcano electrical technology Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
Current Transformer
Place of Origin
,

Zhejiang Volcano electrical technology Co., Ltd

Contact

Phone

+8613567767797

Fax

+86-577-61668057
LZZJ-10kV series indoor current transformer adopts epoxy resin casting structure. It is small in size, light in weight and flexible in function. It has two different ratio making the current transformer suitable for 50Hz and 60Hz. It is suitable for 10kV or lower power system for electric metering, current metering and relay protection.The current transformer meets IEC185 and GB1208-2009(Current Transformer) standards.

J9-10LZZBJ9-10

LZZJ B6LZZJ B6

J18LZZB J18


LZZJ -10kV series indoor current transformer adopts epoxy resin cast-insulated structure. It is small in size, light in weight and flexible in function. It is used for metering electric energy and current monitoring, relay protection in the electrical system of rated frequency 50/60Hz rated voltage 12kV or below. It can be used for MV AIS and other MV switchgears. They can operate in all kinds of environments (such as wide range temperature (-50~60℃), high altitude, high humidity, high pollution or salt).The current transformer  conforms to IEC60044-1 and GB1208 current transformer standard.

This type of current transformer is a full enclosed and pillar type product. The primary winding,secondary winding and core are made up together and poured in the cast.This product possesses the characteristics of high power and thermal stability parameter, large secondary output capacity and stable insulation performance. More complex product can be produced according to the requirements of the customers.

Product Feature


The secondary terminal of the current transformer is equipped with a wiring protective cover. There  is one hole on the front and two sides of the protective cover for the secondary line. Also the protective cover is fixed by seal screw with the anti-tampering function.


  • Rated insulation level 12/42/75KV;

  • Power factor: 0.8(hysteresis);

  • Rated secondarily current: 5A (or 1A);

  • The measurement of partial discharge level not more than 50PC;


Technical data



Type

Rated primary current (A)

Accuracy classes

Rated output (VA)

1s short-time

Thermal current    (kA)

Dynamic stability current

 (peak)

LZZJ B6

100

0.2/0.2

0.2/0.5

0.5/10P15

10/10

10/10

10/15

15

38.25

150

22.5

44

200

24.5

300

400,500,600

33

59

800,1000,1200,1500

41

74

LZZBJ

18-10

 

20

0.2/0.5/10P10

0.2/0.5/5P10 0.5/0.5/10P10

0.2/0.2/10P10

0.5/0.5/5P10 0.2/0.2/5P10

10/10/15

2

5

30

3

7.5

40-50

5.4

13.5

75

8.1

20.2

100

10.8

27

150

16.2

40.5

200

24.3

60.7


Outline and dimension of installation

QQ图片20191104093724

LZZBJ9-10

CT集合sy

Company introduction


Zhejiang Volcano Electrical Tehcnology Co., Ltd , as a technical-guided power transmission and distribution equipment factory, since its establishment, it has made constant efforts to make product quality reliable and technology innovative. The factory has occupied square over 10000㎡, and brought in several international advanced production line.


Zhejiang Volcano-electrical technology is an ISO-9001 ISO-14001, ISO-18001 approved factory, professional in producing vacuum circuit breakers, auto-reclosers, disconnectors, load break switch and switchgear. The factory occupies a manufaturing square over 1000㎡ and has several advanced production line with mechanical operation. We make constant efforts to improve product quality and service. Our company has get many patent certifications and products have passed type testing. We can provide a complete set of transmission and distribution. To offer the best quality with our best service is our main management principal.
Similar Product Recommend