Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotorInduction Motor 1 Hp
  • $item.Title
  • $item.Title

Induction Motor 1 Hp

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
MS series aluminum shell 3 phase induction motors comply with the relevant regulations of the International Electrotechnical Association IEC.

Product Introduction

MS series aluminum shell induction motor 1 hp comply with the relevant regulations of the International Electrotechnical Association IEC. Good raw materials are selected and the overall design is carried out. It has the advantages of good performance, low noise, low vibration, safe and reliable operation, beautiful appearance, small size, light weight, simple structure and convenient maintenance. MS motor can be widely used in general occasions and mechanical equipment with higher requirements that do not contain flammable, explosive or corrosive gases, such as metal cutting machine tools, woodworking machine tools, fans, water pumps, compressors, Machinery transmission equipment for agriculture, food processing, etc.


Product Detail



Motor Type: induction motor 1 hp

Output Power: 0.06 kW - 18.5 kW

Ambient temperature: -15℃~40℃

Altitude: not more than 1000m

Rated voltage: 380V, optional voltage value between 220 ~ 760V

Rated frequency: 50Hz, 60Hz

Protection level: IP54, IP55

Insulation class: B/F

Cooling method: IC411

Working method: S1

Connection method: Y connection of 3kW and below, △ connection of 4kW and above


Product Parameter (Specification)



induction motor 1 hp

image001

Production Features


image001

Know More Us



Why Us



image008


Service and Packing



image009

Motor Knowledge



Explosion-proof motors use brushless excitation, synchronous motors, AC exciters, and rotating rectifiers are coaxial. Its structure and material are still different from ordinary motors. So today I will give you a brief introduction to explosion-proof motors. What is the difference with ordinary motors, I hope it can be helpful to you.


1. The explosion-proof motor adopts brushless excitation, and is equipped with a rotating rectifier board and a static excitation cabinet, and the excitation control system is reliable;


Positive and negative polarity slip excitation is accurate, no impact; system excitation out-of-step protection is reliable, resynchronization ability is strong; circuit design is reasonable, the discharge resistance does not generate heat when working; excitation current adjustment range is wide;


2. Synchronous motor, AC exciter and rotating rectifier plate are coaxial. The rectifier plate is located between the main motor and the exciter, or outside the bearing seat;


3. To meet the requirements of increased-safety explosion-proof motors, take a series of reliable measures to prevent sparks, arcs and dangerous high temperatures;


4. The protection level of the explosion-proof motor shell is IP55;


5. The explosion-proof motor adopts class F insulation, and the temperature rise is assessed according to class B, but ordinary motors cannot meet this requirement;


6. The explosion-proof motor changes the traditional lower water cooling to upper water cooling, that is, the water cooler is placed on the upper part of the motor;


7. Set up a moisture-proof heater for increased safety, fixed in the cover at the bottom of the motor, for heating and moisture-proof when shutting down;


8. Choose high-quality raw materials and leave a large margin for electromechanical calculations, which can meet the operational reliability and temperature requirements of the increased-safety motor;


9. Explosion-proof motors are equipped with perfect protection measures; the main junction box adds a safe self-balancing current transformer for differential protection; the stator winding is embedded with platinum thermal resistance, working standby, and the number of divisions is Pt100; a water leakage monitor is installed, Monitor the water leakage of the water cooler; the sliding bearings at both ends are respectively equipped with on-site temperature display instruments and remote signal terminals;


10. The end covers on both sides of the explosion-proof motor use recessed bolts, and the groove depth is 5 times that of ordinary motors (asbestos pads are required), mainly because in case the internal windings are burned out, the sparks will not run out along the gap;


11. In addition to the excellent sealing structure with gaskets, the junction box of the explosion-proof motor also seals the inner leads of the motor windings to the terminals. In order to reduce sparks, only three ends are drawn (usually 6 with connectors) .


12. The external power inlet of the explosion-proof motor junction box is a movable connection of more than ten centimeters, and the two ends are sealed explosion-proof tubular threaded joints, which can be flexibly and reliably connected with the explosion-proof threaded steel pipe, so that the motor and the input power cord are both sealed and fireproof. The requirements;


13. For the cooling fan at the end of the explosion-proof motor, the outer edge of the fan blade is far away from the wind deflector, and the fan blade is made of plastic;


14. Due to the special structure and materials of explosion-proof motors, explosion-proof motors are much more expensive than ordinary motors.


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend