Membership
Help
ACE METER TECHNOLOGY CO.,LIMITED
ACE METER TECHNOLOGY CO.,LIMITED
Insertion Thermal Gas Mass Flow Meter
Easy Install Insertion Thermal Gas Mass Flow Meter uses ball valve for connection which makes the flow meter easy to be installed and maintenance.The Thermal Mass Probe Flow meter is inserted directly into the flow stream to measure the flow rate of gases, liquids, or slurries in stacks, irregularly shaped lines, and process ducts. Unlike other probe flow meters, we offer a model that has no apertures that can be clogged with particles or distorted by wear. Our sensors are enclosed in a sealed tube which can be inserted or removed through a gate valve or a packing gland while conduit is in use. We also offer a mechanical retractor if required for your application. Our probes are manufactured using 316 SS as a standard, but corrosion resistant materials such as Hastelloy C, Monel, Inconel, Tantalum, and Carpenter 20 are also available. In addition, our Thermal Mass Flow Meters are available in a variety of protective coatings including: Carbide, Fluorocarbon , Teflon, and Sulfinert.

Insertion Thermal Gas Mass Flow Meter
| Measuring Medium | Compressed Air,Gas,Air,Hydrogen,Oxygen,CO2 |
| Pipe Size | DN10~DN4000mm |
| Velocity | 0.05-80m/s |
| Accuracy | ±1~2.5% |
| Working Temperature | Sensor: -40℃~+220℃ |
| Transmitter: -20℃~+45℃ | |
| Working Pressure | Insertion Sensor: medium pressure≤ 1.6MPa |
| Flange Sensor: medium pressure≤ 1.6MPa | |
| Special pressure please contact us | |
| Power Supply | Compact type: 24VDC or 220VAC, Power consumption ≤18W |
| Remote type: 220VAC, | |
| Power consumption ≤19W | |
| Response Time | 1s |
| Output | 4-20mA (optoelectronic isolation, |
| maximum load 500Ω), Pulse, RS485 | |
| (optoelectronic isolation) and HART | |
| Alarm Output | 1-2 line Relay, Normally Open state, 10A/220V/AC or 5A/30V/DC |
| Sensor Type | Standard Insertion, Hot-tapped Insertion and Flange |
| Construction | Compact and Remote |
| Pipe Material | Carbon steel, stainless steel, plastic, etc |
| Display | 4 lines LCD Mass flow, Volume flow in standard condition, Flow totalizer, Date and Time, Working time and Velocity, etc. |
| Protection Class | IP65 |
| Sensor Housing Material | Stainless steel (316) |
Insertion Thermal Gas Mass Flow Meter Product Feature
Correction of output analog quantity
Point-to-multipoint non-linear curve correction
Wide range ratio is greater than 100:1
Large-diameter small-flow measurement precision




Insertion Thermal Gas Mass Flow Meter