Membership
Help
ACE METER TECHNOLOGY CO.,LIMITED
ACE METER TECHNOLOGY CO.,LIMITED
Insertion Type Target Plate Flow Meter
The Large Diameter Durable Insertion Type Target Plate Flow Meter is designed for large diameter which is bigger than DN100.The final user can insert the target flow meter into the pipeline and let the target plate detect the pressure.The insertion type target plate flow meter is mounted by the ball valve for quick and easy installation and maintenance.The Large Diameter Durable Insertion Type Target Plate Flow Meter is normally used for the water , steam, gas measuring in the big diameter pipeline.The feature and the configure gets good response on performance.


| Measure Medium | Oil,Chemical,Steam,Asphalt,Syrup |
| Nominal Diameter&Rated Pressure | Flange:DN15-DN300(1.6-10MPa) |
| Clamp:DN15-DN300(1.6-10MPa) | |
| Insert type:DN150-DN1500(1.6-10MPa) | |
| Screw:DN15-DN50(1.64MPa) | |
| Span | 1.0m³/h-30680m³/h |
| Rated Pressure | 2.5MPa |
| Accuracy Level | ±1%(Full Span) |
| Temperature of Medium | -40℃-+200℃ |
| Environment Temperature | -40℃-+85℃ |
| Power Supply | 24VDC or 3.6V lithium battery(Lifetime>3yrs) |
| Signal Output | 4-20mA |
| Sensor pipe material | SS304/SS316L |
| Ex-proof Level | ExiaIICT5/ExdIIBT6 |
| Wire Joint | 1/2NPT inner screw or M20*1.5 inner screw |
| LCD showing range | instantaneous flow:0-50000 |
| integrated flow:0- (restoration automatic) | |
| Shell Material | Cast Aluminum |
| Loaded Character | RLmax=50(votage-12)Ω@24V |
| Protection Level | IP65 |
Insertion Type Target Plate Flow Meter Product characteristics:
The medium with low flow rate can be measured with a flow rate greater than 0.1 m/ s (the Reynolds number is greater than 1000).
A medium with high viscosity and sediment.
Accurate measurement, high accuracy, up to 0.2% (special order).




Insertion Type Target Plate Flow Meter