Membership
Help
ACE METER TECHNOLOGY CO.,LIMITED
ACE METER TECHNOLOGY CO.,LIMITED
Intelligent vortex flow meter for natural gas
The measurement of natural gas vortex flowmeters is not affected by the temperature, pressure, viscosity and components of the medium. The natural gas vortex flowmeters are not clogged, jammed, difficult to scale, resistant to high pressure, high temperature, safe and explosion-proof, and suitable for harsh environments. The natural gas vortex flowmeter has integrated display and remote transmission display, and can output pulse signals and current signals, which can be networked with a computer.


| Product Name | Vortex flow meter |
| Nominal diameter | DN15-DN300,DN150~DN2000 can use the insertion vortex flowmeter, and the big caliber is more suitable for insertion type. |
| Scope of application | Gases (air, oxygen, nitrogen, gas, natural gas, chemical gas, etc.), liquids (water, high temperature water, oil, food liquid, chemical liquid, etc.), steam (saturated steam, superheated steam) |
| Medium temperature | -40°C~250°C,-40°C~350°C,-40°C~400°C |
| Nominal pressure | ≤1.6MPa ≤2.5MPa ≤4MPa Special pressure can be customized |
| Accuracy level | Liquid 0.5% |
| Gas, steam 1.5% | |
| insertion type 2.5% | |
| Medium velocity range | Liquid:0.6~6m/s,Gas:5~60m/s,steam:5~70m/s. |
| Output Signal | Voltage pulse,4-20mA Current output,HART Agreement,RS485. |
| Converter power supply | Voltage pulse output:+12VDC, 4~20mA Current output:+24VDC; Live LCD display:3.6V1 No. 1 lithium battery power supply, the service life is more than 2 years |
| Ambient temperature | Voltage pulse output:-30°C~+65°C, 4~20mA Current output:-10°C~+55°C; |
| Live LCD display:-25°C~+55°C | |
| Body material | 1Cr 18Ni 9Ti (Other materials according agreement to supply) |
Precautions for using natural gas vortex flowmeter in natural gas measurement
1. Increasing the nominal design capacity: increasing the maximum flow requires increasing the vortex flowmeter, or increasing the gas path, or increasing the pressure. Gas supply safety: No effect due to flowmeter failure.
2. Gas density under operating conditions: The minimum flow rate becomes lower as the density increases.
3. Entrained solids in the air: there may be sediments, non-streamlined bodies may be eroded and a filter is required.
4. Liquid entrainment in the gas: liquid deposits may be in the measurement duct, which will affect the measurement value.
5. Changes in pressure and flow: it will not cause damage, but may cause measurement errors. It is necessary to increase the temperature and pressure compensation configuration.
6. The piping requirements required for the flow meter and its pipeline: the length of the straight pipe section is required for the upstream and downstream, and the length is determined according to the applicable standard installation instructions.




Intelligent vortex flow meter for natural gas