Membership
Help
TIANYI SUNS PIPE&FITTINGS CO.,LTD.
TIANYI SUNS PIPE&FITTINGS CO.,LTD.
ISO2531 Ductile Iron Pipe
Material | Ductile Cast Iron |
Type | T-Type(push-on joint) |
Standard | ISO2531 |
Size | DN80- DN2600 |
Classs | K7, K8, K9, C40, C30, C25, etc |
Length | 6m, 5.7m |
Application | Potable Water / Drinking Water |
Packing | DN100-DN300 in bundles; DN350-DN2600 in bulk ship |
Note | The pipe coating can be customized, such as, zinc-aluminum alloy, PU, etc. |
ISO2531 Ductile Iron Pipe
1) The standard of pipe: ISO2531
2) Effective length: 6M when using bulk shipment way, or 5.7M for container shipment
3) Inner cement line: Portland cement line as per ISO4179
4) Zinc coating: at least 130gsm as per ISO 8179
5) Bitumen painting: at least 70μm as per ISO 8179
6) Gaskets are NBR rubber, natural rubber, SBR rubber or EPDM rubber
tightness ring as per ISO4633
7) DN 80 - 2,600 mm
8) High strength, lighter than gray iron, good corrosion resistance, no furring,
small flow resistance, easy fixing, long life time
9) Checked by automatic inspection equipment
10) Composition:
a) C: 3.4 - 3.7%
b) Si: 2.0 - 2.4%
c) P: <0.08%
d) S: <0.015
11) Pull strength: >420MPa
12) Yield syrength: 300Mpa
13) Hardness: <230HB
14) Process and testing:
a) Blast furnace (Analysis of raw materials test )
b) Mg treatment (Micro & chemical composition test)
c) Pipe spinning (Temperature test)
d) Heat treatment (Micro structure; Flattening test)
e) Zinc coating (Thickness testing)
f) Dimensional checks (Thickness & Dia. testing)
g) Hydraulic test (Pressure test)
h) Internal lining (Thickness testing)
i) External coating (Thickness test)

