Membership
Help
Kangsaite Automation Group Co., Ltd.
Kangsaite Automation Group Co., Ltd.
Introduction
DK800 smart valve positoner controls the valve stroke in response to an input signal of 4-20mA from the control panel,DCS,or calibrator.
Features
◆ Quick and easy auto calibration.
◆ Large flow pilot valve(over than 100LPM)
◆ BY-pass valve(A/M switch installed)
◆ HART communication(HART 7)
◆ Partial stroke test (PST) function.
◆ Alarm function&Self dignostic
Technical Details
Model | DK800L | DK800R | |
Input signal | 4~20mA DC | ||
Impedance | 500Ω at 20mA DC | ||
Supply pressure | 0.14~0.7MPa | ||
Stroke | 10~150mm | 0~90° | |
Air connection | PT1/4,NPT1/4 | ||
Gauge connection | PT1/8,NPT1/8 | ||
Conduit | G(PF)1/2,NPT1/2 | ||
Explosion proof type | Ex ia LLC T5/T6 | ||
Exclosure | IP66 | ||
Ambient temp. | Standard type | -30℃~85℃ | |
Low temp type | -40℃~85℃ | ||
Explosion proof | -40℃~60℃(T5)/-40℃~40℃(T6) | ||
Lcd operating | -30℃~85℃ | ||
Linearity | ±0.5% F.S. | ||
Sensitivity | ±0.2% F.S. | ||
Hysteresis | ±0.5% F.S. | ||
Repeatability | ±0.3% F.S. | ||
Air consumption | Below 2.3LPM (Sup=0.14MPa) | ||
Required air quality | Class 3(ISO 8573-1) | ||
Flow capacity | Over 100LPM (Sup=0.14MPa) | ||
Material | Aluminum die cast | ||
Weight | 2.2kg | ||
Hart version | HART 7 | ||
Position | Connection type | 2 wire | |
Transmitter | Supply voltage | 10~30V DC | |
Limit switch | Mechanical type | AC 125V ,3A DC30V,2A | |
Rating | Proximity type | DC8.2V 8.2A | |

KST (Kangsaite) Group Qualification(Certificate)

←Linear Mechanical Pneumatic Valve Positoner
Flame Proof Type Pneumatic Valve Positioner→
3PC Ball Valve
Full-Lining Wafer Butterfly Valve
Rotary Pneumatic Actuator
V-type Ball Valve
Pneumatic Thread Angle Seat Valve
Scotch Yoke Pneumatic Actuator