Welcome Customer !

Membership

XwbooElectrical & ElectronicsMotorDC MotorJKBLD300 Brushless DC Motor Driver
  • $item.Title
  • $item.Title

JKBLD300 Brushless DC Motor Driver

CHANGZHOU JKONGMOTOR CO., LTD.

Model
Nature of the Manufacturer
Manufacturer
Product Category
DC Motor
Place of Origin
JiangSu, ChangZhou

JKBLD300 Brushless DC Motor Driver

Product Description:

Brand Name: Jkongmotor

Model Name: JKBLD300

Type: BLDC motor driver

Power: 300W

Environment temperature: -10℃—50℃

Input Voltage: +18—+50VDC

Output Current: 15A—35A

Suitable Motor Speed: 0-20000Rpm

Hall Sensor Voltage: 4.5V—5.5V

External Potentiometer: 10kΩ

Support Motor: Brushless DC Motor less of 300w




JKBLD300 Brushless DC Motor driver is suit the following three-phase sine wave power is 300w Brushless DC Motor speed regulation, can provide an external potentiometer control, external analog voltage control, PC (such as PLC, SCM) PWM speed regulation, and other functions. At the same time the drive have large starting torque, quick start and brake, and positive &negative switching, combination of manual and automatic control.


Electrical Specifications:

Parameter

Min

Rated

Max

Unit

Motor Hall Sensor Angle

120°/240°


DC Power Input

18

48

50

V

Drive Current Output

0

15

35

A

Suitable Motor Speed

0


20000

rpm

Hall Sensor Voltage

4.5

5

5.5

V

Hall Sensor Current


20


mA

External Potentiometer


10K


Ω

 



Connection Definition:

Mark

Definition

DC+/DC-

DC Power Input (DC24V~DC48V)

U,V,W

Motor lead wire

Hu,Hv,Hw

Hall sensor lead wire

REF+

Hall sensor power supply +

REF-

Hall sensor power supply -

VCC

External potentiometer power supply +

SV

External potentiometer                               

COM

Public (low level)

F/R

Direction: High level/CW  Low Level/CCW 

EN

Enable:  High Level/Stop  Low Level/Run

BRK

Quick Brake: High Level/Stop Low Level/Run 

SPEED

Speed signal output

ALARM

Alarm signal output




Speed Adjustment Instruction:

Motor Speed Quick Response Setting:

A. Motor speed adjusted by the internal potentiometer RV 

OP/CL Connected (user setting):

B. Motor speed adjusted by the external potentiometer

PID Closed loop-Motor quick response

C. Motor speed adjusted by analog signal  0V~+5V input

OP/CL Disconnected (factory setting):

D. Motor speed adjusted by analog signal  0V~+10V input 

 NO PID Closed loop-Motor normal response

E. Motor speed adjusted by PWM input:

Pulse duty ratio 10%-90% / Speed linear modulation

Pulse rate: 1K-10K/ pulse amplitude 5V

Lead Wire Connection:

Take care of the sequence of U,V,W





Mechanical Size:

bldc motor driver




power parameter setting:                          

Note: to prevent electric pilot time to super power operation and damage Motor, please according to the above numerical combined with electrical power Properly set.Great changes have taken place when the load and lead to electricity Actual operation power more than setting will go into the drive Protected mode.




Customized Design:

If this product do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.



Related BLDC motor:

57mm Brushless DC Motor, 60mm Brushless DC Motor, 80mm Brushless DC Motor, 86mm Brushless DC Motor.







  CHANGZHOU JKONGMOTOR CO.,LTD. was founded in 2011,is a professional high-tech manufacturer of stepper motors and brushless motors.Now 80 employees, workshop area of 6,000 square meters.CHANGZHOU JKONGMOTOR CO.,LTD (Changzhou Jingkong Motor&Electric Appliance Co.,Ltd)is an ISO9001 Professional manufacturer. Was established in 2011 year. We are a professional manufacturer in Changzhou city, China. Production Capacity exceeds more than 1 million motors per year. Our Company offers many major series of products: Hybrid Stepper motors, Closed Loop Stepper Motor, Linear Stepper Motor, Brushless Dc motor, Dc Brush motor, Motor Driver, Geared Motor, Brake Motor, PM Stepper Motor, Power Supply and so on... We are always continues develop new type models.We are also have several joint venture companies who specialized in the production of AC servo motor, PM stepper motors, Spindle motor and Motor drivers. We export our motors to more than 30 countries Such as United States, Germany, Russia, Turkey, Brazil and so on.Jkongmotor sold to major manufacturing Companies for Industry of automation, medical and health care equipment, 3d printer machines, packing devices, Information Technology, household appliance products.We have an Engineering team with many years of experience in application Engineering, design Engineering with the latest advances equipment. Our Engineering Staff provides the finest quality product with service after the product is delivered to our Customers.
Similar Product Recommend