Membership
Help
Besco Machine Tool Limited
Besco Machine Tool Limited
1. Bestel junction box production line adopts automatic feeding system, automatic stamping, and automatic pick-up by the second-element manipulator, and the finished products come out automatically to achieve efficient production.
2. Bestel junction box automatic production line can achieve 20-30 times per minute, and the speed of thin plate simple junction box production line can reach 30-50 times
3. The stretch type adopts high-precision pneumatic punching machine matched with two-dimensional manipulator, and the bending type adopts precision punching machine.
Serial number | Item/Part Description | Brand Description | Country/Region/Standard | Remarks | |
1 | Technology introduction | Japan | |||
2 | Punch accuracy | GBJB/T6580-93/JIS level 1 | |||
3 | Crankshaft | 45# forgings/40cr, quenched and tempered | China | National Exemption/Secondary Inspection | |
4 | Frame steel plate | Shagang/Baosteel/Puyang | China/annealing process | GB/annealing process | |
5 | Gear set | Tooth surface fine grinding process | German NLES equipment | ||
6 | clutch | OMPI/Liyuan | Italy/China | ||
7 | Double solenoid valve | TOYOOKL/TACO | Japan | ||
8 | PLC programmable controller | Delta | Taiwan | ||
9 | Touch screen/encoder | Delta/Kubler | Taiwan/Germany | ||
10 | Overload protection device | SHOWA | Japan | ||
11 | Relay | Schdeider | France | ||
12 | Bearing | TIMKEN/NTN | US/Japan | ||
13 | Oil seal | NOK | Japan | ||
14 | Two-hand switch | FUJI | Japan | ||
15 | power switch button | Schdeider | France | ||
16 | Contactor | Schdeider | France | ||
17 | Multi-segment switch | Schdeider | France | ||
18 | Proximity switch | OMRON | Japan | ||
19 | Electric grease pump | IHI/Streaming/ISHAN | Japan/Zhejiang | ||
20 | Manual oil feeder | Flow all over /ISHAN | Zhejiang | ||
21 | Main motor | TECO/Fonda | Taiwan/China | ||
22 | Frequency converter | Delta | Taiwan | ||
23 | Second-fall protection zone device | OMRON | Japan | ||
24 | Pressure regulator | SMC | Japan | ||
25 | Filter | SMC | Japan | ||
26 | Pressure reducing valve | SMC | Japan | ||
27 | Lubricator | SMC | Japan | ||
28 | Spray solenoid valve | AIRTAC/JPC | Taiwan/Germany | ||
29 | Overload solenoid valve | MAC/JPC | US/Germany | ||
30 | Oil distributor | IHI/ISHAN | Japan/Taiwan | ||
31 | servo motor | Yaskawa/Fuji | Japan | ||
32 | Vacuum pump | Kaiwick | United States | ||
33 | Guide rail/screw | Shanghai Silver | Japan | ||
punch | Single axis 200T | Double shaft open type 200T | Double shaft open 250T |
Feeding system | 300 | 300 | 300 |
Manipulator | No | Yes | Yes |
Molding | Bend | Stretch | Stretch |
Productivity | 40 times/minute | 20-30 times/minute | 20-30 times/minute |
Production site | 8m*3m*4m | 9m*3m*4.5m | 11m*3.5m*5m |