Welcome Customer !

Membership

XwbooAgricultural MachineryOther Agricultural MachineryGrain DryerJYG Series Hollow Paddle Dryer
  • $item.Title
  • $item.Title

JYG Series Hollow Paddle Dryer

Changzhou ZHENXING Environmental Technology Engineering Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Grain Dryer
Place of Origin
JiangSu, ChangZhou

Changzhou ZHENXING Environmental Technology Engineering Co., Ltd.

Contact

Phone

Fax

86-519-88168098
Dual counter-rotating shafts with unique intermeshing hollow wedge-shaped paddles produce intimate mixing, optimize heat transfer, and provide a self-cleaning feature. A large heat transfer area to volume ratio is achieved by the use of hollow paddles and a jacketed vessel, through which the heating medium flows. The result is an efficient, compact machine with less space requirements and lower installation cost.

DESCRIPTIONQJ Series Hollow Blade Dryer

Dual counter-rotating shafts with unique intermeshing hollow wedge-shaped paddles produce intimate mixing, optimize heat transfer, and provide a self-cleaning feature. A large heat transfer area to volume ratio is achieved by the use of hollow paddles and a jacketed vessel, through which the heating medium flows. The result is an efficient, compact machine with less space requirements and lower installation cost.

WORKING PRINCIPLE

The Hollow Paddle Dryer has a metal wall which separates the process mass from the heat source (steam or hot oil). High thermal efficiency is obtained because the heat from the thermal medium goes directly into the process mass. As the material comes into contact with the heated through and agitators, the process mass is heated via conduction. With an insulated dryer, very little heat is lost. To evaporate 1kg of water only requires about 1.2kg of steam for slurry materials. Exhaust gas is minimal and at a low temperature. Therefore, the volume of non-condensable gas from the dryer, which might require treatment, is minimal.

The dryer is an indirect heat transfer device which utilizes a high degree of mechanical agitation to enhance contact with the product being dried. Evaporation rates per square foot of heat transfer surface are maximized through self-cleaning paddles and the mixing effect. Movement of the process material between the slanting surfaces of the revolving wedge-shaped paddles generates shearing forces, which clean the paddle surfaces and maximize conductivity. Counter rotating shafts move the material away from the walls, cleaning the walls by means of the tab on each paddle. This results in higher heat transfer rates than disc or single shaft designs.

The wedge-shaped paddles, and the intermeshing of the dual agitators, create a localized mixing effect around the paddle. This allows more individual particles in the bed to be exposed directly to the heat transfer surface, thereby increasing the heat transfer rate, allowing the use of smaller equipment.

FEATURES

Low Operation Cost

- Easy to operate

- Requires minimal attention

- Simple instruments monitor the process

- High efficiency

- Low off-gas volume

Low Maintenance Cost

- Designed for high torque and low operating speed

- Simple durable design for easy and low maintenance

- No internal parts to adjust or maintain

- No metal to metal contact

- Shafts, pillow block bearings, and drive components are designed for long life under adverse conditions, insuring long term mechanical integrity

- Robust frame supports split pillow block bearings

- Grease-purged stuffing boxes. Alternate seal designs are available

Low Installation Cost

- Designed with compact structure

- Small off-gas system

- Vertical shaft removal reduces building size requirements

HEAT SOURCES(Temperature at 180℃ - 250℃)

Heating by Steam

Steam enters the hollow shaft through a rotary joint and is evenly distributed to all paddles. Condensate is removed with each revolution.

Heating by Hot Oil(thermal fluid)

Hot oil(thermal fluid) enters and exits the hollow shaft through a rotary joint. Pressure from the supply pump forces liquid through the hollow paddles.

TECHNICAL PARAMETERS

Model

Item

JYG3JYG9QJ13JYG18JYG29JYG41JYG52JYG68JYG81JYG95JYG110
Heat Transferring Area (m2)391318294152688195110
Effective Volume (m3)0.060.320.591.091.852.83.965.216.438.079.46
Range of Rotating Speed (rmp)15-3010-2510-2510-2010-2010-2010-2010-205-155-155-10
Power (kw)2.245.57.511153045557595
Inner Width (mm)3065847629401118129614761652182820322210
Outer Width (mm)736841106613201474167618542134118624382668
Body Lenght (mm)19562820304833284114472452585842602061246122
Total Lenght (mm)29724876548659186808757083069296967897049880
Distance of Material Inlet & Outlet (mm)17522540276830483810442049545384556256645664
Height of Center (mm)38038053461076291510661220122012201220
Hotal Height (mm)762838109212701524177820322362246425662668
Heat Inlet (inch)3/43/4111111/211/211/211/22
Heat Outlet (inch)3/43/4111111/211/211/211/22

SCHEMATIC STRUCTURE

APPLICATION

There are economic and environmental benefits to drying biosolid, sludge and by-products. In municipal and industrial facilities, the Model JYG Paddle Dryer is reducing disposal cost and converting waste into marketable by-products. The dryer is widely used in chemical, petrochemical, pharmaceutical, food, metal working, mineral processing, and pulp & paper industries.

TYPICAL PROJECTS

  Jiangsu Zhenxing Drying Equipment Co., Ltd is founded in 1993, located in Changzhou City which about 100 miles away from Shanghai. We are a professional manufacturer who specialized in development, manufacturing, and installation of dryers, mixers, granulators, grinders, conveyors, sieve and etc. We kept continuous improvement over the years and we had become a leading manufacture in the China drying equipment industry. We are also an appointed supplier of China Chemical Equipment Corporation. Our products have been exported to North America, Pakistan, India, Vietnam, Russia and other countries. We have imported the advanced technology from the United States, Germany, Japan, Australia and other countries. We have cooperated with Shanxi University of Science and Technology to develop the dry powder mortar equipment and become the Base of Technical Studies and Research. We can provide the equipment for the entire dry mortar production line according to the customer requirements. Our services are including market analysis, technical consulting, technical training, and etc. We have awarded “Trustworthy Enterprise” in contracting from the government for twenty consecutive years. We have also awarded honors such as “Credit (contract) AAA Grade Enterprise”, “AAA Credit Rating Enterprise”, “Excellent Product of Science and Technology in East China”, “National Quality Trustworthy Products”, and so on. We are also a member of China General Machinery Industry Association and China Association of Environmental Protection Industry. We are certified with ISO9001 quality management system. We follow a strict quality control procedure and we provide high quality products with prompt after sales services and technical supports We are looking forward to have a successful cooperation relationship with you in the future!
Similar Product Recommend