Welcome Customer !

Membership

XwbooMachine ToolMachining CenterHorizontal Machining CenterKDHM630Horizontal Machining Center
  • $item.Title
  • $item.Title

KDHM630Horizontal Machining Center

ZHEJIANG KAIDA MACHINE TOOL CO., LTD.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Horizontal Machining Center
Place of Origin
ZheJiang, ShaoXing
Travel on X axis(Table:left/right): 950mmTravel on Y axis(Spindle head:up/down): 820mmTravel on Z axis(Column:forth/back ): 750mmTable (pallet) work surface area: 630x630mmSpindle speed: 50-5000rpm

This product has features of high efficiency, high precision, high rigidity and excellent cutting performance.

Rectangular guide ways of X, Y and Z axis are hardened to more than HRC52 with good rigidity and anti-vibration performance. This is an important foundation for heavy cutting and high precision cutting.

With a big torque gear box, the main motor power is transmitted through two pairs of gears which bring about automatic changes of two steps of speed. Within each step the speed is infinitely variable. This greatly increases the machine power at low spindle speed.

Through 4 sets of taper pins and taper slots, the table can be accurately positioned to ensure table long time stability and precision indexing and positioning of the table.

Optical rulers are adopted for X, Y and Z axis position inspection to realize full loop control.


KDHM630 dimension (L x W x H)Shipping dimension (L x W x H)Net Weight
Separate packing Separate packing18500kg

This document provides the weight and shipping dimensions. The weight listed for a machine may be off by as much as +/- 5% due to option selection, casting variations, and even the moisture content of the wooden crates surrounding the machine.



TECHNICAL SPECIFICATION

ITEMSKDHM630
TRAVEL
Travel on X axis (Table:left/right)950mm
Travel on Y axis (Spindle head:up/down)820mm
Travel on Z axis (Column:forth/back)750mm
Table surface to spindle center 30~850mm
Table center to spindle nose200~950mm
TABLE
Table (pallet) work surface area 630x630mm
Max. workpiece weight loadable on table 1200kg
Table (pallet) surface configuration 24-M16 screw thread
Min. indexable angle of table 1°(option:0.001°)
Number of table 2
APC changing time16s
SPINDLE
Spindle speed 50-5000rpm
Number of spindle speed change ranges2 ranges
Spindle inner taper 7/24; BT50
Spindle bearing inner diameter Ф100mm
Spindle motor (30min/continuous rating)18.5/22kw
FEEDING
Rapid traverse rate 24m/min
Cutting feed rate 1-12000mm/min
Feed motor X:22Nm Y:40Nm Z:30Nm
Positioning accuracy ± 5µm
Repeatability position accuracy ± 2.5µm
ATC SYSTEM
Type of tool shank BT50
Tool magazine capacity 60
Max. tool diameterФ115mm (without adjacent tool Ф270)
Max. tool length
410mm
Max. tool weight
25kg
Tool changing time (cut to cut)
6s
OTHERS
Control system FANUC
Cooling motor power 0.37kw x 2
Hydraulic pump power 2.2kw
Power motorAC380V±10, 50/60 ±1Hz, 72KVA
Compressed air supply pressure 0.5-0.8MPa
Coolant tank capacity 400L
Floor space required 3300x4800mm
Total machine weight 18500kg

The descriptions, illustrations and specifications given here in are subject to alteration without notice and thus without any obligation.


  Create greatest value to our customers;Realize mutual benefit;Build long and stable cooperative relations;We have strong partnerships in Europe, America, South America, India, Southeast Asia and South Africa. We also supply OEM service, and we look for agents in these areas. In the further, we want to develop miUmac to a global brand.
Similar Product Recommend