Kettelone AT series receiver

Kettelone AT series receiver

Ketlon AT series can improve the safety and reliability of mechanical operation in harsh industrial environment. AT series systems can be installed in driving vehicles, furnaces, conveyors, loading and unloading equipment, mining machinery, agricultural equipment, etc.

All Kettelone AT series systems can be customized according to customer requirements to meet the needs of individual application fields. Customized products can reach 32 outputs and or analog stepless outputs.

receiver/decoder

AT series (see above) are high-quality industrial equipment units with dustproof and waterproof P65 grade. The AT series uses high-performance microprocessor technology. A single decoder board is directly controlled by a sturdy handheld remote controller transmitter and responds accordingly. The entire electronic components of the receiver decoder are protected by an anti-electromagnetic/radio frequency interference chassis (metal box). The area division of the chassis includes power supply, RF reception, and microprocessor-based decoders.

AT series systems can also select Close Start™,Range Limiting™ and Multi-Frequency Using Synthesis, etc. Multiple microprocessors prevent signal interference from the entire decoder, thus improving anti-interference capability and operational reliability.

AT decoder can perform continuous self-testing to ensure the reliability and safety of operation. The display of the two states can show the normal operation state and the fault error state. Connect the output to the relay interface through a cable. Durable relays for simple function identification. All relays are plugged into sockets with mechanical screw clamps, and the filter circuit is designed to sense the load. There is an LED lamp next to each relay display, which lights up when powered on.

Caitron's application engineers guarantee that all AT receivers/decoders can be programmed. This can realize complex sequential logic, timely function and interlock functions, and usually eliminate the second interface, such as PLC with timer and relay. Because AT series can be programmed and designed, AT series products are suitable for various equipment. AT system can also be used with other types of remote controllers under Cattron®.

Key functions

·low cost·Shielded Electromagnetic Interference Radio Frequency Interference Chassis Zoning

·shell is simple·No master or card cage

·1-32 Relay Output + On/Off (Main Line)·Multiple Power Supply Selection

·automatic diagnosis function·has FCC/DOC/CE standard certification and uncertified to choose from.

·status shows normal operation and fault error status·power interruption

·relay contact output allows mixed voltage control·is suitable for continuous output of pavement leveler operation and control.

·Automatic Secure Error Correction (ASO) output confirmation·can be used with several different types of remote controls/transmitters

·Special customization features for each application area

·multiple monitoring timers to ensure the stop of motion without instructions (5-2 hardware in total, 3 software applied to CPU, mainline and motor)

specifications

interface model: mechanical relay normally open contact 8A @ 250VAC or 5A @ 30VDC.(5A; Normally closed contacts are available)

output terminals: each relay contact has two screw terminals to allow mixing control voltage and transformer (2 14AWG per terminal)

Output quantity: 1-32 independent and/or synchronized, plus main line on/off (operation)

enclosure: NEMA 12(IP65) standard-dustproof, waterproof and oil-proof; NEMA 4 and 4X(IP66) are optional

size: AT-16:12 "H x 10" W x 4.5 "D (305mm x 254mm x 115mm);

AT-32:14" H x 12" W x 6" D (375mm x 330mm x 165mm)

control voltage range: 30VDC or 12-250VAC fuse 5A (higher voltage, lower current);

continuous: 0-80V two-stage maximum

power requirements: 32/48/110/220/ VAC 50-60Hz or 12 VDC +/- 20% @ less than 1Amp;

Optional 12 to 48VDC power regulator

receiving frequency (crystal & integrated):72-76MHz,403-424MHz or 447-471MHz (wireless);

880 nm (infrared)

sensitivity: 0.5uV(20dB static) usually

frequency stability: +/-0.0005% reference frequency

applicable environment: about. -4 f to +140 f (-20 c to +60 c), humidity 0 to 95%,

does not crystallize (other special equipment can also be selected)

microcomputer speed: 12MHz

memory size: E-Prem 32K bytes (programmed by Cattron) EE-prom 512 bytes (field programmable)

Optional diagnostic interface: RS232C(DB25 connector) or RS422(MTA connector)

RF range: 300ft. Normal (92m)(no review and approval required);800 ft.(246m) depends on local terms

Boin (Shanghai) Intelligent Equipment Co., Ltd.-Kaitron Remote Control Agent in China

hotline: and ( with the same number)

mailbox: boynesh@163.com

Official website: www.boyinshanghai.com