Welcome Customer !

Membership

XwbooInstrumentationCentrifugeOther CentrifugeKN-1796 Oil Test Centrifuge
  • $item.Title
  • $item.Title

KN-1796 Oil Test Centrifuge

KAYCAN INSTRUMENT (Dalian) Co.,Ltd

Model
Nature of the Manufacturer
Other
Product Category
Other Centrifuge
Place of Origin
,

KAYCAN INSTRUMENT (Dalian) Co.,Ltd

Contact

Jimmy Chou

Phone

+86-13889520862

Fax

KN-1796 Oil Test Centrifuge

centrifuge.png

  KN-1796 Oil Test Centrifuge

The water and sediment content of crude oil is significant because it can cause corrosion of equipment and problems in processing. determination of water and sediment content is required to measure accurately net volumes of actual oil in sales, taxation, exchanges, and custody transfers. It is not anticipated that this test method, which is written with a dedicated laboratory facility in mind, is likely to be used in field test rooms or sample rooms due to safety concerns for proper ventilation and handling

 

Overview

  KN-1796 conforms to the following ASTM standards, ASTM D1290, ASTM D1796, ASTM D2709, ASTM D4007, ASTM D91, ASTM D96.this Oil Test Centrifuge is fully programmable allowing automatic configuration to the specified oil test parameters. A four place swing out rotor and universal bucket assembly accommodates low cost adaptors and cushions suitable for borosilicate glass centrifuge tubes of the types specified for oil testingThis Centrifuge describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure.

 

This centrifuge is used for determining water and sediment in crude oils is not entirely satisfactory. The amount of water detected is almost always lower than the actual water content. When a highly accurate value is required, the revised procedures for water by distillation.

 

Features

1.The machine adopts computer control, touch panel, LCD display, electronic locks, speed PMW control method,12 programs can be stored, 19 levels and deceleration can be adjusted. Its features

2.Due to the unique of shock absorber, the anti-vibration effect is good.

3.The speed control adopt PID way, high precision can choose different raising and lowering speed time, Brushless motor make sure the machine working peacefully, to meet the requirements of the laboratory, it's no need to change carbon brush ,and no dust pollution.

4.Automatic calculation RCF value; Have the point start function (short-term centrifugal);

5.Electronic locks security protection function; when the door does not cover well, the centrifuge can't work.

 

Technical Parameters

1.Host performance parameters.

Max speed: 4000r/min        

Max RCF:3400xgMax capacity:4×200ml          

Speed accuracy:±10r/minTemperature range:indoor +10℃~70℃

Temperature control:±2℃

Time control:1min~99min/inching    

Power supply:AC220V  50Hz  15ANoise < 60dB(A)  

Environmental requirement: 10℃~35℃    

Relative humidity≤85%

Dimension:700mm*600mm*900mm

Weight:130Kg

2.Rotor parameters

Rotor    Capacity                  Max speed               Max RCF

   swing out rotor   36*10ml 4000rpm       3400xg

NO.2    swing out rotor   4*100ml 3000rpm       2062xg

NO.3    swing out rotor   4*200ml 3000rpm       2000xg

 


Kaycan Instrument (Dalian) Co., Ltd. was established in 1996. With 25 years of manufacturing experience, we are a Hi-tech corporation, that specializes in the design and manufacture of petroleum laboratory test instruments for quality control applications. Based in Dalian, we export innovative instruments worldwide with installations in over 60 countries. Our unique range of advanced instruments provide solutions for quality control applications across a diverse range of products from jet fuel to lubricating oils. On this web site, we are pleased to present our comprehensive line of petroleum laboratory instrumentation, both manual and automatic, as well as standards and accessories conforming to the latest ASTM, ISO, IP and related international standards. We invite you to look through our extensive product offerings for instrumentation and services to meet your testing needs, or contact us for custom solutions for your specialized requirements. AccreditationWe are accredited to ISO 9001 for the design, manufacture, supply and service of quality control instruments. We achieve this accreditation with numerous hard working teams that make sure our products are designed, built, inspected, delivered and serviced to the highest of standards. We deliver what you needWhen you order an instrument from us, we make sure you have everything you require to run a test as soon as it arrives. On-site trainingIf required, we will set up your instrument on-site and provide you with all the necessary training. We do online training for end user 24 hours, 365 days!ServicingDepending on the instrument, we provide either in-house or on-site servicing of your instrument. Our goal is to be the best and most dependable instrument company in the market place. We invite your comments and input so that we may continue to serve you.AwardsWe are proud to have received ASTM,SGS certificates, our clients spread all over the world, and we provide for some of the most famous companies, like CNPC, SINOPEC, Intertek, SGS and Etc.
Similar Product Recommend