Welcome Customer !

Membership

XwbooSecurity & ProtectionDisplay DeviceDiode Display (LED)KYL-500L
  • $item.Title
  • $item.Title

KYL-500L

Shenzhen KYLCOM Communication equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Diode Display (LED)
Place of Origin
,
KYL-500L
Features

 

1.Ultra-low power consumption, less than 25mA in receiving mode , less than 1uA in sleep mode .

2.  The battery can be as supply (such as lithium batteries).

3.  High sensitivity, high output power (up to 400mW or more at 3.6V)

4.  8 optional channels, optional communication rate.

5. Small size, easy installation, easy to embed user equipment.

6. The whole module has good shielding performance. When used in embedded, it can effectively prevent mutual interference between devices.


Application

 

Wireless call system, wireless queuing machine, medical vessel;

Wireless POS, PDA;

Wireless data transmission, automated data acquisition system;

Wireless LED display, answering device, etc., intelligent transportation;



 

Technical specification 
                                                                   
                                                            KYL-500L Parameters
FeaturesRangeRemark
Power supply D.C.3.3v3.3-5v
Frequency400Mhz420/450Mhz
Output power400mW--
Transmitting Current 

<300mA

--
Receiving Current<25mA--
Sleeping Current

<1uA

Specify when place order
Receiver sensitivity-120dBm1200bps
-118dBm9600bps
Transmission distance2Km Line-of-sight, the height of antenna 1.5m
Dimension49mm*23mm*10mmWithout Antenna connector

Table: Transmission distance 、Receiver sensitivity and baud rate
 

Baud rate(Bps)

Receiver sensitivity

Transmission distance(Line-of-sight)

1200

-120dbm

2500m

2400

-118dbm

2100m

4800

-116dbm

1600m

9600

-113dbm

1200m

19200

-110dbm

800m

 
 Pin Definitions

                                             KYL-500B Interface schematic


Interface name

Function description

Level

Remark

1

GND

Power Ground



2

VCC

 

Supply(DC)

3.3-4.2V


3


4

GND




5

TEST

Internal test



6

Reserved


TTL


7

Sleeping

TTL level

TTL

Low level active

8

RXD

Data receiving

TTL


9

TXD

 Data transmitting

TTL


 

 Table: Channel and RF Frequency

CH NO.FrequencyCH NO.FrequencyCH NO.FrequencyCH NO.Frequency
1429.0325MHZ2430.0325MHZ3431.0325MHZ4432.0325MHZ
5433.0325MHZ6434.0325MHZ7435.0325MHZ8436.0325MHZ

 

The Function-indicator light

1、The LED indicator light will glitter red and green for 0.5S once after switched on.
2、 The LED indicator light will glitter green continually while receiving data from air.
3、 The LED indicator light will glitter red continuously when transmitting data into air after receiving from COM.
4、 If the module enables the sleep function, LED indicator light is always dark. 

Timing Diagram

1、When Module A transmits data and module B receives data

 That is, the delay time that the terminal A (connected to the module A) sends data to the terminal B (connected to the B module) by wireless. Which be fixed to the time for transmitting 15 bytes. This time is related to the air baud rate, but not to the interface baud rate. details as follows:



 dd01.jpg
Table: Baud rate and delay time

Baud rate(Bps)

Delay time(ms)

19200

8

9600

15

4800

30

2400

60

1200

120

2、Module transceiver conversion time

 That is, the time for converting from the receive state to the transmit state, or from the transmit state to the receive state. During this time (100us), the module cannot receive air data.


dd02.jpg

How to use KYL series micro power wireless data module

Power supply:

    +3.3~6.0V DC,According to the needs of users, it can share the power with other devices, but please select a power supply with a better ripple factor.If conditional, 5V regulators can be used to supply power alone. It is recommended not to use the switching power supply. If you must use the switching power supply, please pay attention to the interference due to switching pulse.In addition, if there are other devices in the system equipment, it must be grounded reliably. Otherwise, it can be self-contained, but it must be completely separated from the city electricity. The maximum output current of the power supply should be more than 1.5 times the maximum operating current of the module.

Packaging accessories

1、Standard accessories

      1、1pc KYL-500L module。

      2、1pc antenna(about 10cm)


 

2、Selectable accessories

1、TTL interface programming cable。(for users to set parameters through RS232 interface of the computer)

    2、Power supply

    3、Selectable antenna。(Users can choose antenna if need)

    Pic.:Selectable accessories



1020L可选配件

 

 

Along with the fast development of RF technology, more and more people know the importance and convenience for the wireless technology and the knowledge is widely adopt by more and more people, so wireless products is becoming more popular in people's life. The strong demand of wireless products causes more actual requirements from end users. Those requirements cover different aspects such as lower power, longer range, simpler usage, lower cost, smaller size, higher reliability and shorter R&D lifecycle, etc.SHENZHEN KYL COMMUNICATION EQUIPMENT CO.,LTD was established in Shenzhen - the forefront of technology and electronic production market inChina. We are specialized on design and developing ODM module series for wireless data communication based on the series of TI 's CHIPCON RF IC. The CHIPCON series has high integrity, high quality RF index and commonly used for mass production. These will ensure the stability and consistency of the products.Now our RF data communication products are widely used in electric power, railroad, oil field, meteorology,security, water conservancy, automation control, media apparatus, meter, home automation. We have not only first-class technology, equipment, RF design engineers, but also excellent administers and senior advisers. They are experienced in large-scale software development, enterprise management and software application characteristics.We has obtained the ISO9001 so as to provide sufficient insurance of products quality and meet your demand for higher quality and lower price. In a word, we will do everything to meet customer’s requirements with the production and services.High quality, sincere service and low price is our value and our promises to our customer. As an enterprise integrated with manufacture and sales, we have confidence to launch more competitive products to cope with more severe competition. KYL is your sincere partner.
You May Like
Similar Product Recommend