Welcome Customer !

Membership

XwbooInstrumentationFlow MeterThrottling DeviceL-shaped elbow flowmeter
  • $item.Title
  • $item.Title

L-shaped elbow flowmeter

Kaifeng Henghe Flow Meter Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Throttling Device
Place of Origin
HeNan, KaiFeng

Kaifeng Henghe Flow Meter Co., Ltd.

Contact

Manager Bian

Phone

13523785668

Fax

86-371-25616199
1.Introductiontoelbowflowmeter  TheLGGserieselbowflowmeterbelongstoadifferentialpressureflowmeasurementsystem.Itisameterthatusestheprincipleofcentrifugalforcetogeneratetheflowofthemediuminthepipelinewhenthefluidismovinginacircularmotion.Itcanbeusedtomeasuregas,

1. Introduction to elbow flowmeter

The LGG series elbow flowmeter belongs to a differential pressure flow measurement system. It is a meter that uses the principle of centrifugal force to generate the flow of the medium in the pipeline when the fluid is moving in a circular motion. It can be used to measure gas, (air, coke oven gas, blast furnace gas and other dry and wet gases) , Steam, liquid and other media. The elbow flowmeter consists of a sensor, a flow totalizer, a differential pressure bender and some pipeline valves. Sensors are divided into L-type sensors and S-type sensors. When flow measurement requires temperature and pressure compensation, pressure transmitters and temperature transmitters should also be equipped.

1.2 Product features: simple structure, no insert throttling parts, no additional resistance loss; good wear resistance, long service life, high accuracy; easy installation, long-term operation and maintenance-free, can be installed by direct welding, no Leakage problems will occur; strong adaptability, wide measurement range, not affected by factors such as on-site high temperature, dust, humidity, electromagnetic field, etc., can work in a complex environment, suitable for measuring dirty gas, and not easy to be blocked; more requirements for straight pipes Low, as long as the first 5D (the inner diameter of the elbow D) and the second 2D can be satisfied, the measurement accuracy can be obtained. The sensor is suitable for a wide range of temperature and pressure: -50~600℃, 0~30Mpa; large-diameter sensors can be retrofitted online using on-site 90° elbows; expert algorithms in the full range, especially for steam measurement, steam varies with temperature and pressure The superheated steam often transforms into saturated steam, forming a vapor-liquid two-phase flow medium. In the algorithm, the influence of the vapor-liquid two-phase flow medium on the mass flow measurement is compensated, and the measurement accuracy is guaranteed.

2. Technical parameters and functions

Pipe diameter range (mm) DN15~2000 (for the elbow sensor modified on site, there is no pipe diameter limitation) Flow rate range (m/s) liquid 0.1~12

Steam or gas 5~160 measuring medium

Liquid: water, oil, methanol, toluene, liquid ammonia, etc.

Gas: blast furnace gas, coke oven gas, mixed gas, chlorine, hydrogen, oxygen, air, nitrogen, etc.

Steam: saturated steam, superheated steam, accuracy ±1% (temperature and pressure compensation) working environment converter: temperature -10~45℃, humidity less than 85% (please specify for special circumstances)

Sensor: Temperature -50~600℃ Pressure 0~16MPa (please specify for special circumstances) signal output 4-20mA  RS-485  RS-232 working power supply AC220VAC, 50Hz measurement function display standard condition flow, standard condition cumulative amount, pressure, differential pressure , Temperature, date, time, etc.

3. Selection and classification

3.1 Elbow sensor selection

Bend pipe sensors are divided into L type and S type. The L-type sensor is installed at the 90° natural turn of the on-site pipeline, and the S-type sensor can be installed on a straight pipeline in any space. The connection with the pipeline is welding or flange connection. L-type sensor

Applicable pipe diameter: DN15~4000mm

Bending diameter ratio: R/d 1.0~5.0

Applicable pipe diameter: DN15~4000mm

  Kaifeng Henghe Flow Meter Co., Ltd. is an emerging enterprise specializing in industrial process automation control and the research, development, production and service of intelligent meters. The company is located in Kaifeng, an ancient capital of the Eight Dynasties. Kaifeng Instrument Industry was founded in 1958. The National Water Flow Metering Station and the Flow Meter Product Quality Inspection Center of the Ministry of Machinery Industry are located here. There are a large number of senior flow meter production and R&D engineering and technical personnel. The company has strong technical force and has passed ISO90001 quality system certification, ISO14001 environmental management system certification, ISO45001 occupational health and safety management system certification, and various flowmeter production licenses. The main products are: electromagnetic flowmeter series (high pressure type, submersible type, sanitary type, plug-in type, etc.), vortex flowmeter series, turbine, differential pressure flowmeter series (standard orifice, standard nozzle, V cone, wedge, etc.) Annular orifice plate, balance orifice plate, venturi tube) and large, medium and small liquid flow calibration device. The company has built four sets of water flow standard devices DN15-DN50, DN65-DN300, DN350-DN700, and DN800-DN2000. The accuracy of the standard meters on the devices are all 0.2 level. The company’s product specifications are complete and can meet liquid, gas, steam, etc. For flow measurement of multiple media, each flowmeter is qualified for the actual flow calibration before leaving the factory. The factory has an automatic control system engineering department, which undertakes complete sets of automatic control projects. Products are widely used in nuclear power, chemical, electric power, petroleum, petrochemical, coal, sewage treatment, animal husbandry, urban water supply, agricultural irrigation, heating, metallurgical coking, machinery, papermaking, medicine, food processing and other industries. And exported to most countries. Based on the tenet of "Today's Quality, Tomorrow's Market", we attach importance to product quality and provide users with high-quality commissioning guidance, technical training, product maintenance, re-schooling and spare parts supply in a timely manner. Kaifeng Yokogawa Instruments is willing to make progress hand in hand with the majority of users in flow meters to create brilliance together.
Similar Product Recommend