Membership
Help
HEBEI MICHU TECHNOLOGY CO.,LTD.
HEBEI MICHU TECHNOLOGY CO.,LTD.
L-shaped sealing ring is used for the sealing of reciprocating hydraulic cylinders and cylinder pistons.
Rings are used in combination. Used in auto hydraulic brake system and clutch control system, afterburner
It plays a role in transmitting pressure and sealing in the system.
Application range of L-type sealing ring: prevent dust and dirt from invading moving parts
Used in reciprocating sealing devices, its service life is longer than that of O-rings.
L-shaped seals are seals used for hydropneumatic reciprocating motion. Standard source HG4-331-66
Scope of application: hydraulic and pneumatic reciprocating piston seals
Material: Nitrile rubber (spot), polyurethane (order)
Product hardness: Shore 70+-5 degrees
Working pressure: <= 32MPA
Working temperature: -30 degrees -- 80 degrees
flagship store
Reciprocating speed: <=1.5M/S
Working medium: hydraulic oil, emulsion, water, gas
Installation: To avoid damage to the sealing lip, precautions should be taken during installation to avoid sharp edges.
| D(bottom outer diameter)*D1(outermost)*d inner diameter*H height | |
| 22*24*8*7 | 125*131*95*14 |
| 25*27*9*7 | 130*136*100*14 |
| 28*30*10*7 | 140*146*110*14 |
| 30*32*11*7 | 150*156*120*14 |
| 32*34*12*7 | 160*166*130*14 |
| 35*37*15*7 | 170*176*130*14 |
| 38*40*18*7 | 180*186*140*14 |
| 40*43*20*7 | 190*196*150*14 |
| 42*45*22*7 | 200*208*160*17 |
| 45*48*25*8 | 220*280*180*17 |
| 48*51*28*8 | 240*280*200*17 |
| 50*53*30*8 | 250*258*205*17 |
| 52*55*32*8 | 260*268*215*17 |
| 55*58*35*8 | 280*288*235*17 |
| 60*63*38*8 | 300*309*255*20 |
| 65*68*40*8 | 320*329*275*20 |
| 65*68*40*8 | 340*249*295*20 |
| 70*74*45*8 | 360*369*310*20 |
| 75*79*48*10 | 380*389*330*20 |
| 80*84*50*10 | 400*409*350*20 |
| 85*89*55*10 | 420*429*370*20 |
| 90*95*60*12 | 450*500*closed*20 |
| 100*105*70*12 | 480*560*closed*26 |
| 105*110*75*12 | 490*540*closed*25 |
| 110*116*80*12 | 500*550*closed*20 |