Membership
Help
Qingdao Yosion Intelligent Technology Co.,Ltd.
Qingdao Yosion Intelligent Technology Co.,Ltd.

Laboratory Cone Ball Mill
The Laboratory cone ball mill is a small, portable, multi-purpose new type of grinding equipment for laboratory use, which is suitable for laboratory wet grinding of fine ore or other materials.
It is suitable for the crushing and processing of various metal and non-metallic ore raw material test samples. Anyone who needs to do the chemical crushing and processing of the geological, mining, carbon smelting, coal, building materials and power sectors can use it. Ultrafine grinding in the ink, fuel and food industry sectors.
Product Advantages
Equipped with balanced and reasonable equipment configuration and high degree of automatic operation.
Electric control of tilting feeding and discharging of the cylinder, convenient and fast, the tilting angle can be set arbitrarily.
Fine grinding material has low unit power consumption and high abrasive efficiency
Feeding and discharging, the cylinder is automatically controlled without manual operation, avoiding the strain caused by manual operation.
Arbitrary setting of machine running time, LCD screen menu display, humanized design
No special foundation required for installation, easy to move, and easy to maintain
The size and composition of the ground material is uniform, and the degree of over crushing is small, which is conducive to improving the quality of the ore selectability experiment.

1. The steel balls have been prepared according to a certain ratio when they leave the factory and cannot be changed at will;
2. Run empty first to flush the steel ball and cylinder wall clean;
3. Hold the handle tightly before feeding, turn the barrel and the frame 90°, the feed inlet is up, loosen the lock position of the handle, open the feed inlet with a wrench, add water, ore, and medicine in turn. After turning the handle 90°, lock it and work according to the scheduled time.
4. When the material is taken, after the motor stops, put the material receiving bowl, open the discharge port with a wrench, and use the handle to loosen the positioning, so that the discharge port of the cylinder can be rotated 90° downward, overflowing the slurry. After cleaning, you can work again.

Model | Sample weight(g) | Feed Size(mm) | Output Size(mm) | Power (kw) | Dimension(mm) | Weight(kg) |
XMQφ150×50 | 200 | ≤3 | 0.074 | 0.75 | 700×670×1160 | 150 |
XMQφ240×90 | 50-1000 | ≤3 | 0.074 | 1.1 | 700×670×1160 | 160 |
XMQφ350×160 | 4000 | ≤3 | 0.074 | 1.1 | 700×710×1300 | 230 |

