Membership
Help
Jinan Acme CNC Equipment Co., Ltd.
Jinan Acme CNC Equipment Co., Ltd.
I. Introduction
The LT-6020 is a tube laser cutting machine with 2D cutting head for the machining of tubes and profiles with a diameter ranging between 15 and 220 mm and a maximum length of 10000mm.
The work piece is housed between the four self-centering sliding jaws of the chuck .The possibility of avoiding equipment change also distinguishes the fixed chuck, consisting in a solid structure housing the four self-centering idle rolls. The LT-6020 loading system consists in a bundle loader, while the open profiles are loaded by a chain system; independent manipulators allow the loading of tubes from the bundle and tubes or profiles from chains.

II. Benefits of cnc pipe Cutting machine
No tooling expenses
Minimal burrs or chips on cuts
Coolant-free (no cutting fluid residue left on parts)
Accurate tolerances (repeatability)
Multiple operations can be consolidated into one cycle
Small to large production runs
Conserve material by nesting several parts into the length of one tube
Ability to be run unattended
III. tube cutting capabilities
| Round Tubes and Hollow Section Cutting Capacity Min: 16mm Ø Max: 273mm Ø |
| Square Tubes and Box Cutting Capacity Min: 16mm x 16mm Max: 200mm x 200mm |
| Rectangular Tubes Cutting Capacity Min: 20mm x 15mm Max: 250mm x 150mm |
| Oval/Elliptical Tubes Cutting Capacity Min: 32mm x 17mm Max: 250mm x 125mm |
IV. quality parts

V.SAMPLES






Ⅵ.FACTORY REVIEW
20000 SQUARE METER FACTORY

ADVANCED HIGH PRECISION MILLING CENTER FOR ESSENTIAL PARTS
