Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesLDWS-IV the intelligent Dew Point Meter
  • $item.Title
  • $item.Title

LDWS-IV the intelligent Dew Point Meter

Wuhan Longdian Electrical Equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Other Testing Machines
Place of Origin
,
LDWS-IV the intelligent Dew Point Meter
Product Features
1.Portable to carry and easy to use
2.low gas flow, consume 2L(101.2kPa) for one time measurement
3.Adapts imported self-locking joints to prevent leakage,It is safe and reliable and has no air leakage.
4.Can store up to 250 groups of testing results
5.LCD display to indicate dew point, PPM, temperature, humidity, date, battery etc
6.Built in 4Ah lithium rechargeable battery, one time use lasts for 10 hours under full charge

Measurement method
1.connect SF6 equipment
First of all, find the joint from the accessories of the instrument which suitable to the SF6 electrical equipment ,connects the end of the pipe to the attachment joint and the wrench, and then inserts the fast joint on the test tube into the sampling port on the instrument and connects the exhaust pipe to the air outlet. Finally, the joint and the SF6 electrical equipment are measured. The quantity interface is connected well, and the wrench is tightened.
 
2.Function Selection
Wait a few seconds after you turn on and enter the "function selection" interface, as shown in the following screen.
 
3.Check electricity
Select "data test" and enter the data test interface, as shown in the following screen. Please check the battery charge shown in the upper right corner. If the power consumption is less than 20%, please switch off and continue to use after charging.
 
4.Start to measurement
First, open the flow valve on the panel to regulate the flow rate, adjust the flow to about 0.5L/min, and start to measure the SF6 dew point. The first equipment takes 5~10 minutes to measure, and then each equipment takes 3~5 minutes.
 
5.Instore data
After measurement is completed, click the "equipment number" to change the number, click "save" and save the data in the instrument.
 
6.Modify time
Click the time display position to modify the system time.
 
7.check the historical data
At the "function selection" interface, select "data management" and enter the "data view" interface, as shown in the following picture. You can view the previous saved data at this interface.
After selecting the data, click delete, you can choose whether to delete all data.
 
8.Measure other equipment
Once an equipment is completed, turn off the flow control valve on this instrument. Remove the adaptor from the SF6 electrical equipment. If you need to continue measuring other equipment, continue to measure other equipment in accordance with the above steps.
 
9. Measurement over
After all equipments are measured, turn off the power supply of this instrument.

Parameter
dew pointMeasurement range-80℃~+20℃(0.04ppm-23700ppm)
Accuracy
±1.0℃(-60℃~+20℃)
±2.0℃(-80℃~-60℃)
Response time
(+20℃)
63% for 5 second,90% for 45 second
(-60℃~+20℃)
63% for 10 second,90% for 240 second(+20℃~-60℃)
Ambient temperature-10℃~+60℃
Environment Humidity0~99% RH
Display unit4.3’colour Touch screen
Electric quantity displayFullness ratio
Date displayYear、Month、Day
Time displayHour、Minute、Second
Printer FunctionMicro needle thermosensitive printer
PowerAC 220V
Built-in rechargeable battery
Battery performanceCharge time: 4 hours; use time more than 10 hours.
Weight5kg
Dimension250×150×300mm
Work temperature-40℃~+60℃
Storage temperature-40℃~+80℃

Related video
Packing
packing
Wuhan Longdian Electrical Equipment Co., Ltd., established in 2007, is located in Wuhan Donghu New Technology Development Zone, a state-level high-tech development zone. It is a manufacturer and service provider of power testing equipment integrating R & D, production and sales. The company mainly cooperates with power generation, power supply, power consumption departments, water conservancy, petroleum, railway, mining, chemical industry, scientific research institutions and other production enterprises The main products are: high voltage switch characteristic tester, relay protection tester, mutual inductor tester, transformer tester, circuit resistance tester and other high voltage test equipment and testing instruments. And according to the needs of customers to provide tailor-made professional power detection equipment application scheme. The company fully implements modern management system and strictly implements ISO9001 quality system certification. It has obtained dozens of new technology patents, such as "high voltage switch characteristic tester", "relay protection tester", "transformer tester", "withstand voltage tester", "battery tester", "cable fault tester", "large current generator", etc., which effectively control the product quality management and production process and ensure the quality of products High quality, high reliability and excellent after-sales service.
Similar Product Recommend