Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesLeakage Current Tester
  • $item.Title
  • $item.Title

Leakage Current Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HuBei, WuHan
1.Rated voltage:AC220V/380V; 2.Test line voltage:AC250V below;3.Leakage Current Separation:30、50、75、100、150、200、250、300、500、1000mA ;Test Leakage Action Time Range:0-799ms;


1.Introduction


leakage current tester is mainly used to test the leakage action current, leakage non-action current and leakage action time of the leakage protector. The test current is 0-1000 mA divided into 10 separations, and the time test range is 0-799 ms,16 bit character blue screen liquid crystal display. The tester is hand-held, small, light and easy to carry. It is the best test instrument for field or indoor detection of various leakage protectors.


II.Main Parameter

1. Rated voltage:AC220V/380V;

2. Test line voltage:AC250V below;

3. Leakage Current Separation:30、50、75、100、150、200、250、300、500、1000mA ;

4. Test Leakage Action Time Range:0-799ms;

5. Leakage Current Accuracy:1 class;

6. Action Time Display Accuracy:0.5%(± 2characters);

7. Ambient temperature:0℃~40℃;

8. Relative environmental humidity :<85%;

9. dimension:195×101×42mm。

III. Measurement Methods and Steps


1.Disassemble the load lead of the leakage protector to prevent damage to the load side appliance。

2.Press the red button at the top right of "on / off" to connect the power supply to the `of the instrument. The red indicator 30mA will be on at the upper left and the LCD screen will display MANUAL 000ms,(note: MANUAL= manual).

3. Pls kindly check the nameplate of the tested leakage switch(general,for the single-phase two-wires indoor leakage switches, the rated action current =30mA, rated non-action current=15mA,break-time ≤0.1S (≤100mS))

4.Click the “shift” button, the left vertical row of 10 red indicator lights from top to bottom cycle to light, as mentioned above 30 mA separation, that is, the corresponding red light shining

5.Insert the red plug of the test table rod into the red seat of the test line and the black plug into the black seat of the ground wire,The other end of the black plug line is a black crocodile clip, which is clamped to the zero line (single phase) or center line (three phase four wire) or ground wire pile on the pile head of the tested leakage protector (three phase three wire)

6.Touch the fire line (220 V) or phase line (three-phase leakage protection) corresponding to the lower pile head of the leakage protector. At this point, the normal leakage protector will trip and break, and the upper LCD screen displays "MANUAL xxxms" at this time(Note: MANUAL= manual, xxx is the breaking time value of the detected leakage protector),Without tripping, the LCD screen will display "MANUAL fault (fault = failure)

7.Check that the measured data whether can meet the values specified on the nameplate。

Press "reset" green button, instrument data to zero, enter the original state of boot, ready for the next test, if you want to continue testing, repeat the above 1-7 items

IV.Automatic test


This instrument is equipped with "manual / automatic" switch button, the upper LCD screen display "AUTO 000ms (note: AUTO= automatic) is automatic test state. When the" shift "button selected rated action value test, if not tripped, the test value will be automatically increased after 1 second until the leakage protector tripping break, the left vertical red light corresponding to the actual leakage action current value, the upper LCD screen display" AUTO xxxms (xxx is the corresponding current gear action time value)


V.Attention


1.“Test line” and "ground wire" must not be mis-connected, red to red 220 V( fire line) or phase line, black to black grounding pile or zero line, sometimes grounding pile loosening (poor grounding) will also cause test failure, please pay attention to distinguish.

2.Open the “on/off”button,if there happens below phenomena such as the indicator light is darker, there is no display in the LCD screen.it may be caused by insufficient battery. The rear cover of the battery can be removed with a cross screwdriver on the reverse side of the instrument to replace the same type of battery

3.In the process of use and carrying, it should be handled with care, free from strong bumps, vibrations, falls, and should prevent the erosion of chemical reactants.

4. During the warranty, if the clients find any defective products during the normal use.



  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend