Membership
Help
COSCO(Lianyungang) Liquid Loading & Unloading Equipment Co.,Ltd.
COSCO(Lianyungang) Liquid Loading & Unloading Equipment Co.,Ltd.
LTC-LNG600 LNG loading skid is our company's special equipment for LNG vehicle loading process control in accordance with international standards. The LNG loading skid integrates the mass flowmeter, electrostatic grounding alarm controller, pressure transmitter, temperature transmitter, loading flow control valve, emergency shut-off valve, and batch controller in the factory according to the requirements of the loading process. A skid is installed, and instrumentation and electrical installation, strength test, air tightness test, low temperature test, etc. are completed. After the loading skid arrives at the user loading site, connect the anchor bolts, connect the process pipelines, communication and power supply lines, and then put it into use.
Function of LNG loading skid:
1. Batch control function: After receiving the order to start loading, the LNG special batch controller (quantitative control instrument) installed on the skid will start according to the predetermined procedure, open the relevant valve, collect the flow of the flow meter, and reach the scheduled loading when measuring, close the relevant valve according to the predetermined procedure.
2. Tank truck pre-cooling function: The temperature inside the LNG tank truck coming to the loading station may be room temperature. For safe loading, a low flow rate top spray must be used to reduce the temperature of the LNG entering the truck. When the temperature drops to close to minus 100 degrees, full flow bottom loading is carried out.
3. Flow control function: a flow regulating valve and mass flow meter are installed in the loading skid. When the tank car is pre-cooled and finished, the loading flow is controlled separately to meet the loading process and safety requirements.
4. Nitrogen purging function: A nitrogen pressure reducing valve is installed in the loading skid, which is used for nitrogen purging of the loading crane pipe before and after loading, and for nitrogen sealing and leak detection of the loading crane pipe rotary joint.
5. Temperature and pressure alarm function: pressure transmitters and temperature transmitters are installed on the LNG pipeline and RG pipeline in the loading skid to monitor the temperature and pressure during the loading process. When the specified temperature and pressure are exceeded, The control system alarms.
6. Position monitoring function: Crane tube docking rack is installed in the loading skid, and explosion-proof proximity switch is installed on the docking rack. After loading is completed, the loading crane tube must be placed back on the docking rack to prevent accidental swinging and damage of the loading crane tube Nearby equipment or accidental damage to the crane tube.
7. Grounding monitoring function: An electrostatic grounding controller is installed in the loading skid. For the safety of loading, the grounding resistance is monitored during the loading process. When the grounding is not good, the system will alarm and cut off the loading control valve.
8. Pressure safety release function. Safety valves are installed in the liquid phase and gas phase lines in the loading skid. In the event of an accident, the pipeline pressure exceeds the design pressure and the safety valve operates to ensure the safety of equipment and instruments in the skid.
9. Lightning protection design: The communication lines, power supply lines, and signal lines connected inside and outside the loading skid are equipped with lightning protection grids to prevent accidental accumulation of damage to the system.
10. Control and interlock function: the batch controller realizes the control of the automatic control valve in the skid according to the process requirements; collects the pressure transmitter, temperature transmitter, flow meter, electrostatic grounding, valve position signal of the skid Centralized display on the batch controller, and realizes internal signal interlocking.
11. Communication function: The loading skid adopts the standard RS485/Modbus communication standard, which can send the loading flow, temperature, pressure, valve position and static state to the DCS in real time to meet the factory management requirements.