Welcome Customer !

Membership

XwbooInstrumentationFlow MeterThrottling DeviceLong diameter nozzle flowmeter
  • $item.Title
  • $item.Title

Long diameter nozzle flowmeter

Kaifeng Henghe Flow Meter Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Throttling Device
Place of Origin
HeNan, KaiFeng

Kaifeng Henghe Flow Meter Co., Ltd.

Contact

Manager Bian

Phone

13523785668

Fax

86-371-25616199

1. Overview of nozzle flowmeter

Nozzle flowmeter is also called standard nozzle flowmeter, standard nozzle, ISA1932 nozzle, and standard orifice plate, venturi tube flowmeter, and venturi nozzle belong to the standard throttling device specified by the standard. It conforms to the national standard GB/2624-1993, so there is no need for real-flow calibration like the standard orifice plate, as long as the design and processing according to the national standard can achieve the design accuracy, but the premise also requires the user to be able to provide more accurately: common flow, medium, work The five parameters of temperature, working pressure, inner and outer diameter of the process tube.

2. Measuring principle of nozzle flowmeter

The measuring principle of the nozzle is based on the throttling principle of fluid mechanics. When the fluid in the pipeline is filled with the fluid flowing through the nozzle in the pipeline, the flow rate will be locally contracted in the nozzle, which will increase the flow rate and reduce the static pressure, so it will be generated before and after the nozzle. The pressure drop or pressure difference, the greater the flow of the medium, the greater the pressure difference generated before and after the nozzle, so the size of the fluid flow can be measured by measuring the pressure difference.

Because the nozzle adopts the arc-shaped contour structure, its pressure loss is small, the straight pipe section required is short, and the accuracy is high.

Flow calculation formula:

In the formula: ,——respectively the mass flow rate (㎏/s) and volume flow rate (m3/s);

⇒Outflow coefficient;

⇒Expansibility coefficient;

⇒The diameter of the throttle opening, m;

⇒Diameter ratio,

⇒pipe inner diameter, m;

⇒The density of the measured fluid, ㎏/m;

⇒Differential pressure, Pa;

3. Features of nozzle flowmeter

1. Simple structure and easy installation.

2. The pressure loss of the nozzle is smaller than that of the orifice plate, and the length of the straight pipe is also required to be shorter.

3. No need for real-flow verification, stable performance.

4. Can withstand high temperature and pressure, and impact resistance.

5. The corrosion resistance is better than the orifice plate, and the service life is longer.

6. ​​High precision, good repeatability, stable outflow coefficient.

7. The arc-shaped structure design can measure various liquids, gases, steam and various dirty media.

8. Integral forging processing technology, high cost.

4. Classification of nozzle flow meters

(1) Standard nozzle (ISA1932 nozzle)

•Applicable medium; especially suitable for high temperature and high pressure steam and water, and can also be used for various gases and liquids

•Nominal diameter: DN50—500mm (DN>500 can also be designed and produced)

•Working pressure: ≦42MPa

•Working temperature: -50℃ — 650℃

•Take pressure method: corner connection (separate ring chamber, flange ring chamber integrated or direct drilling) to take pressure

•Nozzle installation method: flange (direct drilling and pressing parts), fastener clamping type

Flange, ring chamber, fastener clamp type

Clamping part (and pressing part) welding type

•Executive standard: IS05167; GB/T2624

•Accuracy: Meet the standard: ±1.0%

•Material: Flange or clamping parts: Carbon steel, alloy steel, stainless steel, etc. can be selected according to the temperature of the medium

nozzle: stainless steel 304; 316 etc.

(2) Long diameter nozzle

•Applicable medium; suitable for high temperature and high pressure steam and water, and can also be used for various gases and liquids

•Nominal diameter: DN50—600mm

•Working pressure: ≦42MPa

•Working temperature: -50℃-650℃

•Pressing method: Diameter (D-D/2) pressure

•Nozzle installation method: equipped with and welded upstream and downstream pipe sections and then set pressure holes according to the diameter (D-D/2)•

•Executive standard: IS05167; GB/T2624

•Accuracy: Meet the standard: ±2.0%

•Material: Carbon steel, alloy steel, stainless steel, etc. can be selected for the upstream and downstream pipe sections according to the temperature of the medium

nozzle; stainless steel 304; 316 etc.

5. Main technical parameters

1. Nominal diameter: 19.99mm≤DN≤630mm

2. Nominal pressure: PN≤32Mpa

3. Working temperature: -50℃≤t≤550℃

4. Reynolds number range: 0.30≤β≤0.441, 70000≤ReD≤107

When 0.44≤β≤0.8, 20000≤ReD≤107

5. Throat diameter ratio: 0.30≤β≤0.80
6. Accuracy: 0.5 grade, 1.0 grade, 1.5 grade, 2.0 grade

7. Reference standard: GB/T2624-2006, JJG640-94

8. Connection method: flange connection, welding

6. The structure of the nozzle flowmeter

• The standard nozzle is composed of the entrance plane part A perpendicular to the axis, the entrance constriction formed by the arc-shaped curved surfaces B and C, the cylindrical throat E and the protective groove F required to prevent edge damage. The pressure is taken The upstream pressure-taking port adopts a corner joint to take pressure, and the downstream pressure-taking port can be set according to the corner joint to take pressure, or it can be set far downstream. Total length of nozzle

•When 0.30≤β≤2/3, the nozzle length=0.6041d

•When 2/3≤β≤0.80, the nozzle length={0.4041+(0.75/β-0.25/β2-0.5225)0.5}d

•The upstream surface of the ISA 1932 nozzle is a nozzle composed of a plane perpendicular to the axis, a constricted section defined by two arcs whose profile is a circle, a cylindrical throat and a groove. ISA 1932 nozzle has only one method of tapping pressure.

•The upstream surface of the long-diameter nozzle is composed of a plane perpendicular to the axis, a constricted section with a 1/4 elliptical profile, a cylindrical throat, and possible grooves or bevels. There is only one pressure method for long diameter nozzles: D-D/2.

  Kaifeng Henghe Flow Meter Co., Ltd. is an emerging enterprise specializing in industrial process automation control and the research, development, production and service of intelligent meters. The company is located in Kaifeng, an ancient capital of the Eight Dynasties. Kaifeng Instrument Industry was founded in 1958. The National Water Flow Metering Station and the Flow Meter Product Quality Inspection Center of the Ministry of Machinery Industry are located here. There are a large number of senior flow meter production and R&D engineering and technical personnel. The company has strong technical force and has passed ISO90001 quality system certification, ISO14001 environmental management system certification, ISO45001 occupational health and safety management system certification, and various flowmeter production licenses. The main products are: electromagnetic flowmeter series (high pressure type, submersible type, sanitary type, plug-in type, etc.), vortex flowmeter series, turbine, differential pressure flowmeter series (standard orifice, standard nozzle, V cone, wedge, etc.) Annular orifice plate, balance orifice plate, venturi tube) and large, medium and small liquid flow calibration device. The company has built four sets of water flow standard devices DN15-DN50, DN65-DN300, DN350-DN700, and DN800-DN2000. The accuracy of the standard meters on the devices are all 0.2 level. The company’s product specifications are complete and can meet liquid, gas, steam, etc. For flow measurement of multiple media, each flowmeter is qualified for the actual flow calibration before leaving the factory. The factory has an automatic control system engineering department, which undertakes complete sets of automatic control projects. Products are widely used in nuclear power, chemical, electric power, petroleum, petrochemical, coal, sewage treatment, animal husbandry, urban water supply, agricultural irrigation, heating, metallurgical coking, machinery, papermaking, medicine, food processing and other industries. And exported to most countries. Based on the tenet of "Today's Quality, Tomorrow's Market", we attach importance to product quality and provide users with high-quality commissioning guidance, technical training, product maintenance, re-schooling and spare parts supply in a timely manner. Kaifeng Yokogawa Instruments is willing to make progress hand in hand with the majority of users in flow meters to create brilliance together.
Similar Product Recommend